abl_link~ midi and audio sync setup
Hi Folks,
I thought I’d share this patch in the hopes that someone might be able to help improve upon it. I am by no means even semi competent with PD and jumped into this task without actually bothering to learn the basics of PD or RPi, but nevertheless here we are: maybe you can share a better implementation.
Mods/experienced folks, if I am sharing irrelevant/wrong/confusing info, mea culpa and please correct me.
I wanted to make a patch for PD in Raspberry Pi that would do 3 things:
- Get the abl_link~ temp data over wifi
- Create a midi clock output using a 5-pin midi adapter (I have one of the cheapo usb-to-midi cable things here)
-simultaneously create an audio pulse ‘clock’ output such as those used by volcas, Teenage Engineering Pocket operators, and the like (I am not sure if such an audio signal over a 3.5mm jack would be hot enough to be considered a CV pulse too, maybe you can help clear that up?)
As I say, after much struggles I have globbed something together that sort of does this.
A couple of things for newcomers like myself:
The abl_link~ object in the patch isn’t initially part of the standard pure data install as I write. I was able to use deken (ie the code that powers the ‘help/find externals’ bit of PD) to look for abl_link~. Search for it. At the time of writing there is a version for Arm7 devices like the Raspberry Pi 3 which was put together by the illustrious mzero with code from antlr. Go ahead and install the abl_link~ object. (Possibly you may have to uncheck the ‘hide foreign architectures’ box to get the arm7 version to show up. This is usually a safeguard to stop users from trying to install versions of externals that won’t work on their systems. So long as you see ‘arm7’ in the description it should hopefully be the one you want) PD will ask where you want to store the external, and I would just leave it at the default unless you have a special reason to do otherwise.
To get the patch to hook up to your preferred audio and midi outputs by default you may have to take certain steps. In my version of it I have deemed the built in audio and my cheapo USB midi output to be good enough for this task.
[As part of my troubleshooting process I ended up installing amidiauto which is linked to here: https://community.blokas.io/t/script-for-launching-pd-patch-with-midi-without-aconnect/1010/2
I undertook several installations in support of amidiauto which may be helping my system to see and link up my USB midi and PD, but nothing worked until I took the step in the following paragraph about startup flags in PD. (It may also be that I did not need to put in amidiauto at all. Maybe I’ll try that on another card to see if it simplifies the process. I’m saying you might want to try it without amidiauto first to see).]
Midi: - (ALSA is the onboard audio and midi solution that is part of Raspbian). To have PD use ALSA midi at the start I made the following setting in the preferences/startup dialog - within that window there is a section (initially blank) for startup flags. Here you can set instructions for PD to take note of when it starts up. I put in -alsamidi to tell it that alsamidi will be my preferred midi output. (I also took the step of going to file/preferences/midi settings, then ‘apply’ and ‘ok’ to confirm the Alsa midi ports that showed up. Then I went back to file/preferences/save all preferences. This seems to have (fingers crossed) saved the connection to my USB midi output.
Audio: I used the terminal and sudo raspi-config to set my audio out to the internal sound card (advanced options/audio/3.5mm jack). Since I had a fairly unused installation of PD I’d never asked it to do anything but work with the system defaults so getting audio out was fairly simple.
[nb I initially stuck this patch together on my Mac where everything worked pretty trouble free in terms of audio and midi selection]
About the patch. Obviously it is sort of horrible but there it is. It is a combination of stuff I cribbed from the demo example of abl_link~ in the example, and two example patches created by users NoDSP and jpg in this forum post https://forum.pdpatchrepo.info/topic/9545/generate-midi-clock-messages-from-pd/2
As well as some basic synthesis to make the bip bip noises I learned from LWMs youtube channel
https://www.youtube.com/channel/UCw5MbnaoDDuRPFsqaQpU9ig
Any and all errors and bad practice are mine alone.
The patch has some comments in it that doubtless expose my own lack of understanding more than anything. Undoubtedly many users can do a better job than I can.
Some observations on limitations/screwups of the patch:
-
If you disconnect from the stream for a bit, it will attempt to catch up. There will be a massive flurry of notes and/or audio bips as it plays all the intervening notes.
-
It doesn’t seem to be too fussy about where in the bar it is getting started (It will be "on" the beat but sometimes the ‘1’will be the ‘2’ etc. This is okay if I’m using internal sequencers from scratch (in the volca, say) but not if there is an existing pattern that I am trying to have come in 'on the 1'.
-
My solution to more detailed subdivision of bars was to make a big old list of numbers up to 32 so that abl_link~ can count up to more than 4. There’s probably a better solution for this. If you find that you need even more subdivisions because you are making some sort of inhumanly manic speed gabba, add even yet more numbers and connections.
I haven’t tested this much. And since it’s taken me the better part of 18 months to do this at all, I’m really not your guy to make it work any better. I’m posting here so that wiser souls can do a better job and maybe share what I think has the potential to be a useful midi sync tool.
I plan to revisit https://community.blokas.io/t/script-for-launching-pd-patch-with-midi-without-aconnect/1010/3
for some pointers on setting this up to launch the patch at startup to give me a small, portable midi Link sync device for 5-pin and audio-pulse clocked devices.
This is my first ever bit of quasi productive input to any technical community (mostly I just hang around asking dumb questions… So be kind and please use your giant brains to make it better) I look forward to spending some time learning the basics now. link-sync.pd
Web Audio Conference 2019 - 2nd Call for Submissions & Keynotes
Apologies for cross-postings
Fifth Annual Web Audio Conference - 2nd Call for Submissions
The fifth Web Audio Conference (WAC) will be held 4-6 December, 2019 at the Norwegian University of Science and Technology (NTNU) in Trondheim, Norway. WAC is an international conference dedicated to web audio technologies and applications. The conference addresses academic research, artistic research, development, design, evaluation and standards concerned with emerging audio-related web technologies such as Web Audio API, Web RTC, WebSockets and Javascript. The conference welcomes web developers, music technologists, computer musicians, application designers, industry engineers, R&D scientists, academic researchers, artists, students and people interested in the fields of web development, music technology, computer music, audio applications and web standards. The previous Web Audio Conferences were held in 2015 at IRCAM and Mozilla in Paris, in 2016 at Georgia Tech in Atlanta, in 2017 at the Centre for Digital Music, Queen Mary University of London in London, and in 2018 at TU Berlin in Berlin.
The internet has become much more than a simple storage and delivery network for audio files, as modern web browsers on desktop and mobile devices bring new user experiences and interaction opportunities. New and emerging web technologies and standards now allow applications to create and manipulate sound in real-time at near-native speeds, enabling the creation of a new generation of web-based applications that mimic the capabilities of desktop software while leveraging unique opportunities afforded by the web in areas such as social collaboration, user experience, cloud computing, and portability. The Web Audio Conference focuses on innovative work by artists, researchers, students, and engineers in industry and academia, highlighting new standards, tools, APIs, and practices as well as innovative web audio applications for musical performance, education, research, collaboration, and production, with an emphasis on bringing more diversity into audio.
Keynote Speakers
We are pleased to announce our two keynote speakers: Rebekah Wilson (independent researcher, technologist, composer, co-founder and technology director for Chicago’s Source Elements) and Norbert Schnell (professor of Music Design at the Digital Media Faculty at the Furtwangen University).
More info available at: https://www.ntnu.edu/wac2019/keynotes
Theme and Topics
The theme for the fifth edition of the Web Audio Conference is Diversity in Web Audio. We particularly encourage submissions focusing on inclusive computing, cultural computing, postcolonial computing, and collaborative and participatory interfaces across the web in the context of generation, production, distribution, consumption and delivery of audio material that especially promote diversity and inclusion.
Further areas of interest include:
- Web Audio API, Web MIDI, Web RTC and other existing or emerging web standards for audio and music.
- Development tools, practices, and strategies of web audio applications.
- Innovative audio-based web applications.
- Web-based music composition, production, delivery, and experience.
- Client-side audio engines and audio processing/rendering (real-time or non real-time).
- Cloud/HPC for music production and live performances.
- Audio data and metadata formats and network delivery.
- Server-side audio processing and client access.
- Frameworks for audio synthesis, processing, and transformation.
- Web-based audio visualization and/or sonification.
- Multimedia integration.
- Web-based live coding and collaborative environments for audio and music generation.
- Web standards and use of standards within audio-based web projects.
- Hardware and tangible interfaces and human-computer interaction in web applications.
- Codecs and standards for remote audio transmission.
- Any other innovative work related to web audio that does not fall into the above categories.
Submission Tracks
We welcome submissions in the following tracks: papers, talks, posters, demos, performances, and artworks. All submissions will be single-blind peer reviewed. The conference proceedings, which will include both papers (for papers and posters) and extended abstracts (for talks, demos, performances, and artworks), will be published open-access online with Creative Commons attribution, and with an ISSN number. A selection of the best papers, as determined by a specialized jury, will be offered the opportunity to publish an extended version at the Journal of Audio Engineering Society.
Papers: Submit a 4-6 page paper to be given as an oral presentation.
Talks: Submit a 1-2 page extended abstract to be given as an oral presentation.
Posters: Submit a 2-4 page paper to be presented at a poster session.
Demos: Submit a work to be presented at a hands-on demo session. Demo submissions should consist of a 1-2 page extended abstract including diagrams or images, and a complete list of technical requirements (including anything expected to be provided by the conference organizers).
Performances: Submit a performance making creative use of web-based audio applications. Performances can include elements such as audience device participation and collaboration, web-based interfaces, Web MIDI, WebSockets, and/or other imaginative approaches to web technology. Submissions must include a title, a 1-2 page description of the performance, links to audio/video/image documentation of the work, a complete list of technical requirements (including anything expected to be provided by conference organizers), and names and one-paragraph biographies of all performers.
Artworks: Submit a sonic web artwork or interactive application which makes significant use of web audio standards such as Web Audio API or Web MIDI in conjunction with other technologies such as HTML5 graphics, WebGL, and Virtual Reality frameworks. Works must be suitable for presentation on a computer kiosk with headphones. They will be featured at the conference venue throughout the conference and on the conference web site. Submissions must include a title, 1-2 page description of the work, a link to access the work, and names and one-paragraph biographies of the authors.
Tutorials: If you are interested in running a tutorial session at the conference, please contact the organizers directly.
Important Dates
March 26, 2019: Open call for submissions starts.
June 16, 2019: Submissions deadline.
September 2, 2019: Notification of acceptances and rejections.
September 15, 2019: Early-bird registration deadline.
October 6, 2019: Camera ready submission and presenter registration deadline.
December 4-6, 2019: The conference.
At least one author of each accepted submission must register for and attend the conference in order to present their work. A limited number of diversity tickets will be available.
Templates and Submission System
Templates and information about the submission system are available on the official conference website: https://www.ntnu.edu/wac2019
Best wishes,
The WAC 2019 Committee
Possible audio file playback methods
@Transcend Ahh..... that is where the confusion arises. What is being read is individual samples.... at 44100Hz sample rate there are 44100 every second. The pitch is heard because of the rate at which they rise and fall in value.
In Pd a sine wave at 100 Hz would have a sample value of zero (maybe, it depends at what time the wave starts) at index 0, and then rising sample values to a value of 1 at sample number 110 (more or less) falling back to a sample value of 0 at sample 220, continuing to fall to -1 at sample 330 and then rising back to a value of zero at sample number 441....... etc. etc.
When those values are read by [tabread4~] the output would....... eventually, once it gets to your speakers..... push and pull the speaker smoothly 100 times a second, and be heard as 100Hz. Depending on the bit-depth of the dac the actual sample values later in the chain will be much larger, but Pd max/min values are +1/-1 at the output to the [dac~]. Your soundcard and Pd take care of that automatically.
If there is another sound, say at 1KHz., that would modulate that 100Hz wave..... it would look like a ripple on the 100Hz wave........ and so on. A music track will look a real mess when you look at it, with only loud / quiet parts really recognisable. But our ears, or more especially our brains, can make total sense of it.
Samplerate (audio) objects are used to set the indexes because they send a value at the samplerate...... so 44100 times a second...... so every single index is sent to [tabread4~]
Digital audio (FFT) is fiendishly complicated to understand, but this gets you quite a long way into it in only a few minutes........ https://medium.com/@djtech42/explanation-of-sample-rate-in-digital-audio-and-breakdown-of-misconceptions-38f912fb3b1f
Actually it gets you a very long way toward a good understanding in just a few minutes.......
David.
[small job offer] porting max external to pd
Edit 1: Took a shot porting it in this little textarea. Probably doesn't compile yet...
Edit 2: Ok, this should compile now. I haven't actually tried to instantiate it yet, though. It's possible I set it up with the wrong number of xlets.
Edit 3: Seems to instantiate ok. It appears it doesn't take signal input so the CLASS_MAINSIGNALIN macro is neccessary. Just comment that part out to make it a control signal.
Note-- in my port it's called [vb_fourses~]
for the reason noted below.
I have no idea if the algorithm behaves correctly, but it does output sound.
Btw-- AFAICT you should be able to compile this external for the 64-bit version of Purr Data and it should work properly. It doesn't require a special 64-bit codepath in Pd so I commented that part out.
Btw 2-- there should probably be a "best practices" rule that states you can only name your class something that is a legal C function name. Because this class doesn't follow that practice I made a mistake in the port. Further, the user will make a mistake because I had to change the class name. If I had instead made the setup function a different name than the creator I would create an additional problem that would force users to declare the lib before using it. Bad all around, and not worth whatever benefit there is to naming a class "foo.bar" instead of "foo_bar"
/*
#include "ext.h"
#include "ext_obex.h"
#include "z_dsp.h"
#include "ext_common.h"
*/
#include "m_pd.h"
#include "math.h"
/*
a chaotic oscillator network
based on descriptions of the 'fourses system' by ciat-lonbarde
www.ciat-lonbarde.net
07.april 2013, volker b?hm
*/
#define NUMFOURSES 4
static void *myObj_class;
typedef struct {
// this is a horse... basically a ramp generator
double val;
double inc;
double dec;
double adder;
double incy, incym1; // used for smoothing
double decy, decym1; // used for smoothing
} t_horse;
typedef struct {
t_object x_obj;
double r_sr;
t_horse fourses[NUMFOURSES+2]; // four horses make a fourse...
double smoother;
t_sample x_f;
} t_myObj;
// absolute limits
static void myObj_hilim(t_myObj *x, t_floatarg input);
static void myObj_lolim(t_myObj *x, t_floatarg input);
// up and down freqs for all oscillators
static void myObj_upfreq(t_myObj *x, t_floatarg freq1, t_floatarg freq2, t_floatarg freq3, t_floatarg freq4);
static void myObj_downfreq(t_myObj *x, t_floatarg freq1, t_floatarg freq2, t_floatarg freq3, t_floatarg freq4);
static void myObj_smooth(t_myObj *x, t_floatarg input);
static void myObj_info(t_myObj *x);
// DSP methods
static void myObj_dsp(t_myObj *x, t_signal **sp);
static t_int *myObj_perform(t_int *w);
//void myObj_dsp64(t_myObj *x, t_object *dsp64, short *count, double samplerate,
// long maxvectorsize, long flags);
//void myObj_perform64(t_myObj *x, t_object *dsp64, double **ins, long numins,
// double **outs, long numouts, long sampleframes, long flags, void *userparam);
//
static void *myObj_new( t_symbol *s, int argc, t_atom *argv);
//void myObj_assist(t_myObj *x, void *b, long m, long a, char *s);
void vb_fourses_tilde_setup(void) {
t_class *c;
myObj_class = class_new(gensym("vb_fourses~"), (t_newmethod)myObj_new, 0, sizeof(t_myObj),
0, A_GIMME, NULL);
c = myObj_class;
class_addmethod(c, (t_method)myObj_dsp, gensym("dsp"), A_CANT, 0);
// class_addmethod(c, (t_method)myObj_dsp64, gensym("dsp64"), A_CANT, 0);
class_addmethod(c, (t_method)myObj_smooth, gensym("smooth"), A_FLOAT, 0);
class_addmethod(c, (t_method)myObj_hilim, gensym("hilim"), A_FLOAT, 0);
class_addmethod(c, (t_method)myObj_lolim, gensym("lolim"), A_FLOAT, 0);
class_addmethod(c, (t_method)myObj_upfreq, gensym("upfreq"), A_FLOAT, A_FLOAT, A_FLOAT, A_FLOAT, 0);
class_addmethod(c, (t_method)myObj_downfreq, gensym("downfreq"), A_FLOAT, A_FLOAT, A_FLOAT, A_FLOAT, 0);
class_addmethod(c, (t_method)myObj_info, gensym("info"), 0);
//class_addmethod(c, (t_method)myObj_assist, "assist", A_CANT,0);
CLASS_MAINSIGNALIN(myObj_class, t_myObj, x_f);
// class_dspinit(c);
// class_register(CLASS_BOX, c);
post("vb_fourses~ by volker b?hm\n");
// return 0;
}
static void myObj_smooth(t_myObj *x, t_floatarg input) {
// input = CLAMP(input, 0., 1.);
if (input < 0.) input = 0;
if (input > 1.) input = 1;
x->smoother = 0.01 - pow(input,0.2)*0.01;
}
static void myObj_hilim(t_myObj *x, t_floatarg input) {
x->fourses[0].val = input; // store global high limit in fourses[0]
}
static void myObj_lolim(t_myObj *x, t_floatarg input) {
x->fourses[5].val = input; // store global low limit in fourses[5]
}
static void myObj_upfreq(t_myObj *x, t_floatarg freq1, t_floatarg freq2, t_floatarg freq3, t_floatarg freq4) {
x->fourses[1].inc = fabs(freq1)*4*x->r_sr;
x->fourses[2].inc = fabs(freq2)*4*x->r_sr;
x->fourses[3].inc = fabs(freq3)*4*x->r_sr;
x->fourses[4].inc = fabs(freq4)*4*x->r_sr;
}
static void myObj_downfreq(t_myObj *x, t_floatarg freq1, t_floatarg freq2, t_floatarg freq3, t_floatarg freq4) {
x->fourses[1].dec = fabs(freq1)*-4*x->r_sr;
x->fourses[2].dec = fabs(freq2)*-4*x->r_sr;
x->fourses[3].dec = fabs(freq3)*-4*x->r_sr;
x->fourses[4].dec = fabs(freq4)*-4*x->r_sr;
}
//#pragma mark 64bit dsp-loop ------------------
//void myObj_dsp64(t_myObj *x, t_object *dsp64, short *count, double samplerate,
// long maxvectorsize, long flags) {
// object_method(dsp64, gensym("dsp_add64"), x, myObj_perform64, 0, NULL);
//
// if(samplerate<=0) x->r_sr = 1.0/44100.0;
// else x->r_sr = 1.0/samplerate;
//
//
//}
//static void myObj_perform64(t_myObj *x, t_object *dsp64, double **ins, long numins,
// double **outs, long numouts, long sampleframes, long flags, void *userparam){
//
// t_double **output = outs;
// int vs = sampleframes;
// t_horse *fourses = x->fourses;
// double val, c, hilim, lolim;
// int i, n;
//
// if (x->x_obj.z_disabled)
// return;
//
// c = x->smoother;
// hilim = fourses[0].val;
// lolim = fourses[5].val;
//
// for(i=0; i<vs; i++)
// {
// for(n=1; n<=NUMFOURSES; n++) {
// // smoother
// fourses[n].incy = fourses[n].inc*c + fourses[n].incym1*(1-c);
// fourses[n].incym1 = fourses[n].incy;
//
// fourses[n].decy = fourses[n].dec*c + fourses[n].decym1*(1-c);
// fourses[n].decym1 = fourses[n].decy;
//
// val = fourses[n].val;
// val += fourses[n].adder;
//
// if(val <= fourses[n+1].val || val <= lolim ) {
// fourses[n].adder = fourses[n].incy;
// }
// else if( val >= fourses[n-1].val || val >= hilim ) {
// fourses[n].adder = fourses[n].decy;
// }
//
// output[n-1][i] = val;
//
// fourses[n].val = val;
// }
// }
//
// return;
//
//}
//#pragma mark 32bit dsp-loop ------------------
static void myObj_dsp(t_myObj *x, t_signal **sp)
{
dsp_add(myObj_perform, 6, x, sp[0]->s_vec, sp[1]->s_vec, sp[2]->s_vec, sp[3]->s_vec, sp[0]->s_n);
if(sp[0]->s_sr<=0)
x->r_sr = 1.0/44100.0;
else x->r_sr = 1.0/sp[0]->s_sr;
}
static t_int *myObj_perform(t_int *w)
{
t_myObj *x = (t_myObj*)(w[1]);
t_float *out1 = (float *)(w[2]);
t_float *out2 = (float *)(w[3]);
t_float *out3 = (float *)(w[4]);
t_float *out4 = (float *)(w[5]);
int vs = (int)(w[6]);
// Hm... not sure about this member. I don't think we can disable individual
// objects in Pd...
// if (x->x_obj.z_disabled)
// goto out;
t_horse *fourses = x->fourses;
double val, c, hilim, lolim;
int i, n;
c = x->smoother;
hilim = fourses[0].val;
lolim = fourses[5].val;
for(i=0; i<vs; i++)
{
for(n=1; n<=NUMFOURSES; n++) {
// smoother
fourses[n].incy = fourses[n].inc*c + fourses[n].incym1*(1-c);
fourses[n].incym1 = fourses[n].incy;
fourses[n].decy = fourses[n].dec*c + fourses[n].decym1*(1-c);
fourses[n].decym1 = fourses[n].decy;
val = fourses[n].val;
val += fourses[n].adder;
if(val <= fourses[n+1].val || val <= lolim ) {
fourses[n].adder = fourses[n].incy;
}
else if( val >= fourses[n-1].val || val >= hilim ) {
fourses[n].adder = fourses[n].decy;
}
fourses[n].val = val;
}
out1[i] = fourses[1].val;
out2[i] = fourses[2].val;
out3[i] = fourses[3].val;
out4[i] = fourses[4].val;
}
//out:
return w+7;
}
static void myObj_info(t_myObj *x) {
int i;
// only fourses 1 to 4 are used
post("----- fourses.info -------");
for(i=1; i<=NUMFOURSES; i++) {
post("fourses[%ld].val = %f", i, x->fourses[i].val);
post("fourses[%ld].inc = %f", i, x->fourses[i].inc);
post("fourses[%ld].dec = %f", i, x->fourses[i].dec);
post("fourses[%ld].adder = %f", i, x->fourses[i].adder);
}
post("------ end -------");
}
void *myObj_new(t_symbol *s, int argc, t_atom *argv)
{
t_myObj *x = (t_myObj *)pd_new(myObj_class);
// dsp_setup((t_pxobject*)x, 0);
outlet_new((t_object *)x, &s_signal);
outlet_new((t_object *)x, &s_signal);
outlet_new((t_object *)x, &s_signal);
outlet_new((t_object *)x, &s_signal);
x->r_sr = 1.0/sys_getsr();
if(sys_getsr() <= 0)
x->r_sr = 1.0/44100.f;
int i;
for(i=1; i<=NUMFOURSES; i++) {
x->fourses[i].val = 0.;
x->fourses[i].inc = 0.01;
x->fourses[i].dec = -0.01;
x->fourses[i].adder = x->fourses[i].inc;
}
x->fourses[0].val = 1.; // dummy 'horse' only used as high limit for fourses[1]
x->fourses[5].val = -1.; // dummy 'horse' only used as low limit for fourses[4]
x->smoother = 0.01;
return x;
}
//void myObj_assist(t_myObj *x, void *b, long m, long a, char *s) {
// if (m==1) {
// switch(a) {
// case 0: sprintf (s,"message inlet"); break;
// }
// }
// else {
// switch(a) {
// case 0: sprintf (s,"(signal) signal out osc1"); break;
// case 1: sprintf(s, "(signal) signal out osc2"); break;
// case 2: sprintf(s, "(signal) signal out osc3"); break;
// case 3: sprintf(s, "(signal) signal out osc4"); break;
// }
//
// }
//}
martin brinkmann patch on Raspberry Pi
Hello Community
I try since a couple of day to make the 7Tones Patch running on a Raspberry Pi.
the patch was written by Martin Brinkmann http://www.martin-brinkmann.de/pd-patches.html
It runs pretty fine under Win10 and MacOS, but not on my Jessie Raspberry.
I am pretty new to Pure Data and also my linux foo is more or less not available.
This is the output:
pi@raspberrypi:~/Downloads/7Tones $ sudo pd -nogui -verbose 7tones1.pd
input channels = 2, output channels = 2
Pd-0.47.1 ("") compiled for Debian (0.47.1-3) on 2016/11/28 at 20:56:10 UTC
tried /home/pi/Downloads/7Tones/7tones1.pd and succeeded
tried /home/pi/Downloads/7Tones/abs_uniquecatch1.l_arm and failed
tried /home/pi/Downloads/7Tones/abs_uniquecatch1.pd_linux and failed
tried /home/pi/Downloads/7Tones/abs_uniquecatch1/abs_uniquecatch1.l_arm and failed
tried /home/pi/Downloads/7Tones/abs_uniquecatch1/abs_uniquecatch1.pd_linux and failed
tried /home/pi/Downloads/7Tones/abs_uniquecatch1.pd and succeeded
tried /home/pi/Downloads/7Tones/abs_uniquecatch1.pd and succeeded
tried /home/pi/Downloads/7Tones/abs_rev3rs.l_arm and failed
tried /home/pi/Downloads/7Tones/abs_rev3rs.pd_linux and failed
tried /home/pi/Downloads/7Tones/abs_rev3rs/abs_rev3rs.l_arm and failed
tried /home/pi/Downloads/7Tones/abs_rev3rs/abs_rev3rs.pd_linux and failed
tried /home/pi/Downloads/7Tones/abs_rev3rs.pd and succeeded
tried /home/pi/Downloads/7Tones/abs_rev3rs.pd and succeeded
tried /home/pi/Downloads/7Tones/abs_delay1.l_arm and failed
tried /home/pi/Downloads/7Tones/abs_delay1.pd_linux and failed
tried /home/pi/Downloads/7Tones/abs_delay1/abs_delay1.l_arm and failed
tried /home/pi/Downloads/7Tones/abs_delay1/abs_delay1.pd_linux and failed
tried /home/pi/Downloads/7Tones/abs_delay1.pd and succeeded
tried /home/pi/Downloads/7Tones/abs_delay1.pd and succeeded
priority 6 scheduling enabled.
/usr/lib/puredata/bin/pd-watchdog
opened 0 MIDI input device(s) and 0 MIDI output device(s).
Any ideas?
Cheers Marcus
Purr Data Linux-64 and GEM?
Ok, here in Puppy-Linux apt-get is not installed.
Now I installed libftgl2_2.1.3 successfully with the package manager.
Doing the same as before
[Gem] creates! Yes!
In the commandline (linux-console) [shortened]:
pd-l2ork -noprefs -nostdpath -nrt -verbose
Pd-L2Ork version 2.4.6 (20171213-rev.46ffba3)
compiled 22:30:53 Dec 13 2017
port 5401
guidir is /usr/lib/pd-l2ork/bin
"/usr/lib/pd-l2ork/bin"/nw/nw --user-data-dir="/root/.config/purr-data" "/usr/lib/pd-l2ork/bin" 5401 localhost pd-l2ork "/usr/lib/pd-l2ork/bin" xf3c100Waiting for connection request...
[0426/002010.733670:WARNING:chrome_main_delegate.cc(565)] final extension:
... connected
/etc/pd/gem.conf: No such file or directory
/root/.config/pure-data/gem.conf: No such file or directory
./gem.conf: No such file or directory
load plugins 'film' in '/usr/lib/pd-l2ork/extra/Gem/'
pattern : /usr/lib/pd-l2ork/extra/Gem/gem_film*.so
dylib loading file '/usr/lib/pd-l2ork/extra/Gem/gem_filmAVIPLAY.so'!
library loading returned: dlerror 'libaviplay-0.7.so.0: cannot open shared object file: No such file or directory'
dylib loading file '/usr/lib/pd-l2ork/extra/Gem/gem_filmGMERLIN.so'!
library loading returned: dlerror 'libgmerlin_avdec.so.1: cannot open shared object file: No such file or directory'
dylib loading file '/usr/lib/pd-l2ork/extra/Gem/gem_filmMPEG3.so'!
library loading returned: dlerror 'libmpeg3.so.2: cannot open shared object file: No such file or directory'
dylib loading file '/usr/lib/pd-l2ork/extra/Gem/gem_filmQT4L.so'!
library loading returned: dlerror 'libquicktime.so.2: cannot open shared object file: No such file or directory'
[...]
dylib loading file '/usr/lib/pd-l2ork/extra/Gem/gem_imageMAGICK.so'!
library loading returned: dlerror 'libMagick++-6.Q16.so.5: cannot open shared object file: No such file or directory'
[...]
dylib loading file '/usr/lib/pd-l2ork/extra/Gem/gem_imageMAGICK.so'!
library loading returned: dlerror 'libMagick++-6.Q16.so.5: cannot open shared object file: No such file or directory'
[...]
dylib loading file '/usr/lib/pd-l2ork/extra/Gem/gem_recordQT4L.so'!
library loading returned: dlerror 'libquicktime.so.2: cannot open shared object file: No such file or directory'
[...]
There are some more libs missing, maybe I should install them too?
All the examples of Gem seem to work now!
Even the teapod and openGL stuff.
And my final patches, also work. So nice!
Now I will review what those flags actually do:
https://puredata.info/docs/faq/commandline
But I am wondering, if I was lucky, that Gem is programmed for printing messages in the commandline and other non-working libraries probably won't do so?
Thank you so much
Purr Data 2.5.0
ok dependencies seems to be ok...this is my log
fremen@fremenCPU MINGW64 ~
$ pacman -S autoconf automake git libtool \
make mingw-w64-x86_64-dlfcn mingw-w64-x86_64-fftw
mingw-w64-x86_64-fluidsynth
mingw-w64-x86_64-ftgl mingw-w64-x86_64-fribidi
mingw-w64-x86_64-ladspa-sdk mingw-w64-x86_64-lame
mingw-w64-x86_64-libsndfile mingw-w64-x86_64-libvorbis
mingw-w64-x86_64-lua mingw-w64-x86_64-toolchain
mingw-w64-x86_64-libjpeg-turbo
rsync unzip wget
warning: autoconf-2.69-3 is up to date -- reinstalling
warning: automake-wrapper-10-1 is up to date -- reinstalling
warning: git-2.10.1-1 is up to date -- reinstalling
warning: libtool-2.4.6-2 is up to date -- reinstalling
warning: make-4.2.1-1 is up to date -- reinstalling
:: There are 16 members in group mingw-w64-x86_64-toolchain:
:: Repository mingw64
- mingw-w64-x86_64-binutils 2) mingw-w64-x86_64-crt-git
- mingw-w64-x86_64-gcc 4) mingw-w64-x86_64-gcc-ada
- mingw-w64-x86_64-gcc-fortran 6) mingw-w64-x86_64-gcc-libgfortran
- mingw-w64-x86_64-gcc-libs mingw-w64-x86_64-gcc-objc
- mingw-w64-x86_64-gdb 10) mingw-w64-x86_64-headers-git
- mingw-w64-x86_64-libmangle-git 12) mingw-w64-x86_64-libwinpthread-git
- mingw-w64-x86_64-make 14) mingw-w64-x86_64-pkg-config
- mingw-w64-x86_64-tools-git 16) mingw-w64-x86_64-winpthreads-git
Enter a selection (default=all):
warning: mingw-w64-x86_64-binutils-2.27-2 is up to date -- reinstalling
warning: mingw-w64-x86_64-crt-git-5.0.0.4745.d2384c2-1 is up to date -- reinstal ling
warning: mingw-w64-x86_64-gcc-6.2.0-2 is up to date -- reinstalling
warning: mingw-w64-x86_64-gcc-libgfortran-6.2.0-2 is up to date -- reinstalling
warning: mingw-w64-x86_64-gcc-libs-6.2.0-2 is up to date -- reinstalling
warning: mingw-w64-x86_64-headers-git-5.0.0.4747.0f8f626-1 is up to date -- rein stalling
warning: mingw-w64-x86_64-libwinpthread-git-5.0.0.4741.2c8939a-1 is up to date - - reinstalling
warning: mingw-w64-x86_64-winpthreads-git-5.0.0.4741.2c8939a-1 is up to date -- reinstalling
warning: unzip-6.0-2 is up to date -- reinstalling
warning: wget-1.18-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
warning: dependency cycle detected:
warning: mingw-w64-x86_64-gcc-libgfortran will be installed before its mingw-w64 -x86_64-gcc-libs dependency
warning: dependency cycle detected:
warning: mingw-w64-x86_64-harfbuzz will be installed before its mingw-w64-x86_64 -freetype dependency
warning: dependency cycle detected:
warning: mingw-w64-x86_64-cairo will be installed before its mingw-w64-x86_64-fr eetype dependency
warning: dependency cycle detected:
warning: mingw-w64-x86_64-fontconfig will be installed before its mingw-w64-x86_ 64-freetype dependency
Packages (58) mingw-w64-x86_64-cairo-1.15.2-4 mingw-w64-x86_64-flac-1.3.1-2
mingw-w64-x86_64-fontconfig-2.12.0-2
mingw-w64-x86_64-freetype-2.7-1 mingw-w64-x86_64-gdbm-1.12-1
mingw-w64-x86_64-glib2-2.50.1-2
mingw-w64-x86_64-graphite2-1.3.8-5
mingw-w64-x86_64-harfbuzz-1.3.2-1
mingw-w64-x86_64-libogg-1.3.2-2 mingw-w64-x86_64-libpng-1.6.26-1
mingw-w64-x86_64-ncurses-6.0.20161001-1
mingw-w64-x86_64-pcre-8.38-1 mingw-w64-x86_64-pixman-0.34.0-3
mingw-w64-x86_64-portaudio-19_20140130-2
mingw-w64-x86_64-python2-2.7.12-1
mingw-w64-x86_64-readline-6.3.008-1
mingw-w64-x86_64-speex-1.2rc2-2
mingw-w64-x86_64-speexdsp-1.2rc3-2 mingw-w64-x86_64-tcl-8.6.6-1
mingw-w64-x86_64-termcap-1.3.1-2 mingw-w64-x86_64-tk-8.6.6-1
mingw-w64-x86_64-wineditline-2.101-4 winpty-0.4.0-2
autoconf-2.69-3 automake-wrapper-10-1 git-2.10.1-1
libtool-2.4.6-2 make-4.2.1-1 mingw-w64-x86_64-binutils-2.27-2
mingw-w64-x86_64-crt-git-5.0.0.4745.d2384c2-1
mingw-w64-x86_64-dlfcn-1.0.0-2 mingw-w64-x86_64-fftw-3.3.5-1
mingw-w64-x86_64-fluidsynth-1.1.6-3
mingw-w64-x86_64-fribidi-0.19.7-1
mingw-w64-x86_64-ftgl-2.1.3rc5-2 mingw-w64-x86_64-gcc-6.2.0-2
mingw-w64-x86_64-gcc-ada-6.2.0-2
mingw-w64-x86_64-gcc-fortran-6.2.0-2
mingw-w64-x86_64-gcc-libgfortran-6.2.0-2
mingw-w64-x86_64-gcc-libs-6.2.0-2
mingw-w64-x86_64-gcc-objc-6.2.0-2 mingw-w64-x86_64-gdb-7.12-1
mingw-w64-x86_64-headers-git-5.0.0.4747.0f8f626-1
mingw-w64-x86_64-ladspa-sdk-1.13-2
mingw-w64-x86_64-lame-3.99.5-4
mingw-w64-x86_64-libjpeg-turbo-1.5.1-1
mingw-w64-x86_64-libmangle-git-5.0.0.4669.7de6266-1
mingw-w64-x86_64-libsndfile-1.0.26-1
mingw-w64-x86_64-libvorbis-1.3.5-1
mingw-w64-x86_64-libwinpthread-git-5.0.0.4741.2c8939a-1
mingw-w64-x86_64-lua-5.3.3-1
mingw-w64-x86_64-make-4.1.2351.a80a8b8-1
mingw-w64-x86_64-pkg-config-0.29.1-2
mingw-w64-x86_64-tools-git-5.0.0.4669.7de6266-1
mingw-w64-x86_64-winpthreads-git-5.0.0.4741.2c8939a-1
rsync-3.1.2-2 unzip-6.0-2 wget-1.18-1
Total Download Size: 76.81 MiB
Total Installed Size: 749.00 MiB
Net Upgrade Size: 369.69 MiB
:: Proceed with installation? [Y/n] Y
:: Retrieving packages...
mingw-w64-x86_64-dl... 9.6 KiB 9.41M/s 00:00 [#####################] 100%
mingw-w64-x86_64-ff... 4.0 MiB 1146K/s 00:04 [#####################] 100%
mingw-w64-x86_64-wi... 32.7 KiB 6.39M/s 00:00 [#####################] 100%
mingw-w64-x86_64-pc... 859.1 KiB 1252K/s 00:01 [#####################] 100%
mingw-w64-x86_64-gl... 2.9 MiB 1247K/s 00:02 [#####################] 100%
mingw-w64-x86_64-li... 191.2 KiB 7.18M/s 00:00 [#####################] 100%
mingw-w64-x86_64-fl... 582.7 KiB 1588K/s 00:00 [#####################] 100%
mingw-w64-x86_64-li... 331.2 KiB 1761K/s 00:00 [#####################] 100%
mingw-w64-x86_64-sp... 472.2 KiB 1349K/s 00:00 [#####################] 100%
mingw-w64-x86_64-sp... 519.0 KiB 1458K/s 00:00 [#####################] 100%
mingw-w64-x86_64-li... 359.9 KiB 1874K/s 00:00 [#####################] 100%
mingw-w64-x86_64-po... 143.6 KiB 7.01M/s 00:00 [#####################] 100%
mingw-w64-x86_64-fl... 252.2 KiB 1425K/s 00:00 [#####################] 100%
mingw-w64-x86_64-fo... 220.8 KiB 1284K/s 00:00 [#####################] 100%
mingw-w64-x86_64-pi... 289.5 KiB 1591K/s 00:00 [#####################] 100%
mingw-w64-x86_64-ca... 755.8 KiB 1423K/s 00:01 [#####################] 100%
mingw-w64-x86_64-gr... 167.0 KiB 7.09M/s 00:00 [#####################] 100%
mingw-w64-x86_64-ha... 314.4 KiB 1700K/s 00:00 [#####################] 100%
mingw-w64-x86_64-li... 285.9 KiB 1571K/s 00:00 [#####################] 100%
mingw-w64-x86_64-fr... 503.3 KiB 1422K/s 00:00 [#####################] 100%
mingw-w64-x86_64-ft... 118.8 KiB 7.25M/s 00:00 [#####################] 100%
mingw-w64-x86_64-fr... 93.4 KiB 7.02M/s 00:00 [#####################] 100%
mingw-w64-x86_64-la... 8.3 KiB 8.13M/s 00:00 [#####################] 100%
mingw-w64-x86_64-la... 373.9 KiB 1928K/s 00:00 [#####################] 100%
mingw-w64-x86_64-lu... 269.6 KiB 1506K/s 00:00 [#####################] 100%
mingw-w64-x86_64-gc... 18.0 MiB 1203K/s 00:15 [#####################] 100%
mingw-w64-x86_64-gc... 8.1 MiB 1209K/s 00:07 [#####################] 100%
mingw-w64-x86_64-gc... 13.6 MiB 1202K/s 00:12 [#####################] 100%
mingw-w64-x86_64-gd... 164.1 KiB 6.97M/s 00:00 [#####################] 100%
mingw-w64-x86_64-nc... 1697.2 KiB 1237K/s 00:01 [#####################] 100%
mingw-w64-x86_64-te... 12.6 KiB 12.3M/s 00:00 [#####################] 100%
mingw-w64-x86_64-re... 327.4 KiB 1732K/s 00:00 [#####################] 100%
mingw-w64-x86_64-tc... 2.9 MiB 1242K/s 00:02 [#####################] 100%
mingw-w64-x86_64-tk... 1873.6 KiB 1218K/s 00:02 [#####################] 100%
mingw-w64-x86_64-py... 11.2 MiB 1216K/s 00:09 [#####################] 100%
mingw-w64-x86_64-gd... 2.9 MiB 1234K/s 00:02 [#####################] 100%
mingw-w64-x86_64-li... 26.7 KiB 6.51M/s 00:00 [#####################] 100%
mingw-w64-x86_64-ma... 103.2 KiB 7.20M/s 00:00 [#####################] 100%
mingw-w64-x86_64-pk... 237.5 KiB 1357K/s 00:00 [#####################] 100%
mingw-w64-x86_64-to... 257.4 KiB 1446K/s 00:00 [#####################] 100%
mingw-w64-x86_64-li... 379.7 KiB 1957K/s 00:00 [#####################] 100%
winpty-0.4.0-2-x86_64 495.6 KiB 1404K/s 00:00 [#####################] 100%
rsync-3.1.2-2-x86_64 259.9 KiB 1460K/s 00:00 [#####################] 100%
wget-1.18-1-x86_64 582.1 KiB 1595K/s 00:00 [#####################] 100%
(58/58) checking keys in keyring [#####################] 100%
(58/58) checking package integrity [#####################] 100%
(58/58) loading package files [#####################] 100%
(58/58) checking for file conflicts [#####################] 100%
(58/58) checking available disk space [#####################] 100%
warning: could not get file information for usr/share/man/man3/Git::I18N.3pm.gz
warning: could not get file information for usr/share/man/man3/Git::SVN::Editor. 3pm.gz
warning: could not get file information for usr/share/man/man3/Git::SVN::Fetcher .3pm.gz
warning: could not get file information for usr/share/man/man3/Git::SVN::Memoize ::YAML.3pm.gz
warning: could not get file information for usr/share/man/man3/Git::SVN::Prompt. 3pm.gz
warning: could not get file information for usr/share/man/man3/Git::SVN::Ra.3pm. gz
warning: could not get file information for usr/share/man/man3/Git::SVN::Utils.3 pm.gz
:: Processing package changes...
( 1/58) reinstalling autoconf [#####################] 100%
( 2/58) reinstalling automake-wrapper [#####################] 100%
( 3/58) reinstalling git [#####################] 100%
( 4/58) reinstalling libtool [#####################] 100%
( 5/58) reinstalling make [#####################] 100%
( 6/58) reinstalling mingw-w64-x86_64-libwinpt... [#####################] 100%
( 7/58) reinstalling mingw-w64-x86_64-gcc-libg... [#####################] 100%
( 8/58) reinstalling mingw-w64-x86_64-gcc-libs [#####################] 100%
( 9/58) installing mingw-w64-x86_64-dlfcn [#####################] 100%
(10/58) installing mingw-w64-x86_64-fftw [#####################] 100%
(11/58) installing mingw-w64-x86_64-wineditline [#####################] 100%
(12/58) installing mingw-w64-x86_64-pcre [#####################] 100%
(13/58) installing mingw-w64-x86_64-glib2 [#####################] 100%
No schema files found: doing nothing.
(14/58) installing mingw-w64-x86_64-libogg [#####################] 100%
(15/58) installing mingw-w64-x86_64-flac [#####################] 100%
(16/58) installing mingw-w64-x86_64-libvorbis [#####################] 100%
(17/58) installing mingw-w64-x86_64-speexdsp [#####################] 100%
(18/58) installing mingw-w64-x86_64-speex [#####################] 100%
(19/58) installing mingw-w64-x86_64-libsndfile [#####################] 100%
(20/58) installing mingw-w64-x86_64-portaudio [#####################] 100%
(21/58) installing mingw-w64-x86_64-fluidsynth [#####################] 100%
(22/58) installing mingw-w64-x86_64-fontconfig [#####################] 100%
Fontconfig configuration is done via /mingw64/etc/fonts/conf.avail and conf.d.
Read /mingw64/etc/fonts/conf.d/README for more information.
updating font cache... C:/msys64/mingw64/bin/fc-cache.exe: error while loading s hared libraries: ?: cannot open shared object file: No such file or directory
done.
(23/58) installing mingw-w64-x86_64-pixman [#####################] 100%
(24/58) installing mingw-w64-x86_64-cairo [#####################] 100%
Optional dependencies for mingw-w64-x86_64-cairo
mingw-w64-x86_64-glib2: libcairo-gobject [installed]
(25/58) installing mingw-w64-x86_64-graphite2 [#####################] 100%
(26/58) installing mingw-w64-x86_64-harfbuzz [#####################] 100%
Optional dependencies for mingw-w64-x86_64-harfbuzz
mingw-w64-x86_64-icu: harfbuzz-icu support
(27/58) installing mingw-w64-x86_64-libpng [#####################] 100%
(28/58) installing mingw-w64-x86_64-freetype [#####################] 100%
(29/58) installing mingw-w64-x86_64-ftgl [#####################] 100%
(30/58) installing mingw-w64-x86_64-fribidi [#####################] 100%
(31/58) installing mingw-w64-x86_64-ladspa-sdk [#####################] 100%
(32/58) installing mingw-w64-x86_64-lame [#####################] 100%
(33/58) installing winpty [#####################] 100%
(34/58) installing mingw-w64-x86_64-lua [#####################] 100%
(35/58) reinstalling mingw-w64-x86_64-binutils [#####################] 100%
(36/58) reinstalling mingw-w64-x86_64-headers-git [#####################] 100%
(37/58) reinstalling mingw-w64-x86_64-crt-git [#####################] 100%
(38/58) reinstalling mingw-w64-x86_64-winpthre... [#####################] 100%
(39/58) reinstalling mingw-w64-x86_64-gcc [#####################] 100%
(40/58) installing mingw-w64-x86_64-gcc-ada [#####################] 100%
(41/58) installing mingw-w64-x86_64-gcc-fortran [#####################] 100%
(42/58) installing mingw-w64-x86_64-gcc-objc [#####################] 100%
(43/58) installing mingw-w64-x86_64-gdbm [#####################] 100%
(44/58) installing mingw-w64-x86_64-ncurses [#####################] 100%
(45/58) installing mingw-w64-x86_64-termcap [#####################] 100%
(46/58) installing mingw-w64-x86_64-readline [#####################] 100%
(47/58) installing mingw-w64-x86_64-tcl [#####################] 100%
(48/58) installing mingw-w64-x86_64-tk [#####################] 100%
(49/58) installing mingw-w64-x86_64-python2 [#####################] 100%
(50/58) installing mingw-w64-x86_64-gdb [#####################] 100%
(51/58) installing mingw-w64-x86_64-libmangle-git [#####################] 100%
(52/58) installing mingw-w64-x86_64-make [#####################] 100%
(53/58) installing mingw-w64-x86_64-pkg-config [#####################] 100%
(54/58) installing mingw-w64-x86_64-tools-git [#####################] 100%
(55/58) installing mingw-w64-x86_64-libjpeg-turbo [#####################] 100%
(56/58) installing rsync [#####################] 100%
(57/58) reinstalling unzip [#####################] 100%
(58/58) reinstalling wget [#####################] 100%
FFT analysis in wav files
Hi, guys!
I'm relatively new to Pure Data and I'm making a visual project — with Pure Data (Purr Data version) and Processing — that depends on a good FFT analysis.
I've been trying to solve this problem for some time now.
I made the patch that is in this tutorial:
This patch opens a file and "draws" the left and right channels on two arrays.
I'm trying to mix this patch with the "patches/3-8-1-1-rfft-array.pd" of this tutorial:
http://www.pd-tutorial.com/english/ch03s08.html#id431716
So, what I'm trying to do is to make an FFT analysis to an wav file to represent visually the amplitude of each range of frequencies from the lower frequencies to the higher frequencies for different songs.
When I test the FFT analysis with an [osc~] object (writing it in an array), everything is kind of fine: 10000Hz in the middle, 20000Hz glued to the right. But I noticed that when I put [osc~ 0], the amplitude glued to the left is really high. Same with 50Hz, 100Hz, 150Hz, etc.. until around 1500Hz. Another thing I noticed is that each frequency has a different amplitude.
So, one thing I tried to do: I put the FFT code in a subpatch and changed the blocksize inside it to 4096 with the object [block~]. Since only the first 32 bins shows the frequencies, I put the size of the array with half the blocksize: 2048. Then, since the main frequencies of the majority of the songs goes until around 5000Hz — I've been told that C8 correspond to around 4200Hz, and that would be in the 7th bin in a block size of 64 —, I tried to reduce the size of the array to 512:
20000 (total frequencies) / 2048 (bins) = 9,76 (frequencies per bin)
5000 (frequencies for songs) / 9,76 (frequencies per bin) = 512 (bins)
In a blocksize of 64, this would correspond to the first 8 bins.
But still, after all this, the frequencies are always glued to the left:
I've tried everything to make a well-distributed FFT analysis, like it should be, but it's ALWAYS glued to the left with all the songs that I tried with...
Sorry for the long post and let me know if I wasn't clear in my question...
Thank you in advance!
Pure data Random endless list of errors?
Currenty outputs no sound?
input channels = 0, output channels = 0
input channels = 0, output channels = 0
tried /Applications/Pd-extended.app/Contents/Resources/extra/libdir/libdir.pd_darwin and succeeded
tried /Applications/Pd-extended.app/Contents/Resources/extra/vanilla/list.pd_darwin and succeeded
tried ./extra.pd_darwin and failed
tried /System/Library/Fonts/extra.pd_darwin and failed
tried /Library/Fonts/extra.pd_darwin and failed
tried /Users/joelnash/Library/Fonts/extra.pd_darwin and failed
tried /usr/X11R6/lib/X11/fonts/TTF/extra.pd_darwin and failed
tried /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/fonts/extra.pd_darwin and failed
tried /Users/joelnash/Library/Pd/extra.pd_darwin and failed
tried /Library/Pd/extra.pd_darwin and failed
tried /Applications/Pd-extended.app/Contents/Resources/Scripts/../extra/extra.pd_darwin and failed
tried ./extra/extra.pd_darwin and failed
tried /System/Library/Fonts/extra/extra.pd_darwin and failed
tried /Library/Fonts/extra/extra.pd_darwin and failed
tried /Users/joelnash/Library/Fonts/extra/extra.pd_darwin and failed
tried /usr/X11R6/lib/X11/fonts/TTF/extra/extra.pd_darwin and failed
tried /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/fonts/extra/extra.pd_darwin and failed
tried /Users/joelnash/Library/Pd/extra/extra.pd_darwin and failed
tried /Library/Pd/extra/extra.pd_darwin and failed
tried /Applications/Pd-extended.app/Contents/Resources/Scripts/../extra/extra/extra.pd_darwin and failed
tried ./extra/extra-meta.pd and failed
tried /System/Library/Fonts/extra/extra-meta.pd and failed
tried /Library/Fonts/extra/extra-meta.pd and failed
tried /Users/joelnash/Library/Fonts/extra/extra-meta.pd and failed
tried /usr/X11R6/lib/X11/fonts/TTF/extra/extra-meta.pd and failed
tried /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/fonts/extra/extra-meta.pd and failed
tried /Users/joelnash/Library/Pd/extra/extra-meta.pd and failed
tried /Library/Pd/extra/extra-meta.pd and failed
tried /Applications/Pd-extended.app/Contents/Resources/Scripts/../extra/extra/extra-meta.pd and succeeded
tried ./pdlua.pd_darwin and failed
tried /System/Library/Fonts/pdlua.pd_darwin and failed
tried /Library/Fonts/pdlua.pd_darwin and failed
tried /Users/joelnash/Library/Fonts/pdlua.pd_darwin and failed
tried /usr/X11R6/lib/X11/fonts/TTF/pdlua.pd_darwin and failed
tried /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/fonts/pdlua.pd_darwin and failed
tried /Applications/Pd-extended.app/Contents/Resources/Scripts/../extra/extra/pdlua.pd_darwin and failed
tried /Users/joelnash/Library/Pd/pdlua.pd_darwin and failed
tried /Library/Pd/pdlua.pd_darwin and failed
tried /Applications/Pd-extended.app/Contents/Resources/Scripts/../extra/pdlua.pd_darwin and failed
tried ./pdlua/pdlua.pd_darwin and failed
tried /System/Library/Fonts/pdlua/pdlua.pd_darwin and failed
tried /Library/Fonts/pdlua/pdlua.pd_darwin and failed
tried /Users/joelnash/Library/Fonts/pdlua/pdlua.pd_darwin and failed
tried /usr/X11R6/lib/X11/fonts/TTF/pdlua/pdlua.pd_darwin and failed
tried /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/fonts/pdlua/pdlua.pd_darwin and failed
tried /Applications/Pd-extended.app/Contents/Resources/Scripts/../extra/extra/pdlua/pdlua.pd_darwin and failed
tried /Users/joelnash/Library/Pd/pdlua/pdlua.pd_darwin and failed
tried /Library/Pd/pdlua/pdlua.pd_darwin and failed
tried /Applications/Pd-extended.app/Contents/Resources/Scripts/../extra/pdlua/pdlua.pd_darwin and succeeded
tried ./tclpd.pd_darwin and failed
tried /System/Library/Fonts/tclpd.pd_darwin and failed
tried /Library/Fonts/tclpd.pd_darwin and failed
tried /Users/joelnash/Library/Fonts/tclpd.pd_darwin and failed
tried /usr/X11R6/lib/X11/fonts/TTF/tclpd.pd_darwin and failed
tried /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/fonts/tclpd.pd_darwin and failed
tried /Applications/Pd-extended.app/Contents/Resources/Scripts/../extra/extra/tclpd.pd_darwin and failed
tried /Users/joelnash/Library/Pd/tclpd.pd_darwin and failed
tried /Library/Pd/tclpd.pd_darwin and failed
tried /Applications/Pd-extended.app/Contents/Resources/Scripts/../extra/tclpd.pd_darwin and failed
tried ./tclpd/tclpd.pd_darwin and failed
tried /System/Library/Fonts/tclpd/tclpd.pd_darwin and failed
tried /Library/Fonts/tclpd/tclpd.pd_darwin and failed
tried /Users/joelnash/Library/Fonts/tclpd/tclpd.pd_darwin and failed
tried /usr/X11R6/lib/X11/fonts/TTF/tclpd/tclpd.pd_darwin and failed
tried /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/fonts/tclpd/tclpd.pd_darwin and
Unexpected noises appear when playing score
@whale-av so to finally record ill use this folder,,,, I already have all the voice gen up to 31... just need the part where the harmonics are faded out, for the next score i will start to implement all that you have given me,...1_vod_6.pd mix_mod.pd part_timbre.pd part_voice.pd voice_gen1.pd voice_gen2.pd voice_gen3.pd voice_gen4.pd voice_gen5.pd voice_gen6.pd voice_gen7.pd voice_gen8.pd voice_gen9.pd voice_gen10.pd voice_gen11.pd voice_gen12.pd voice_gen13.pd voice_gen14.pd voice_gen15.pd voice_gen16.pd voice_gen17.pd voice_gen18.pd voice_gen19.pd voice_gen20.pd voice_gen21.pd voice_gen22.pd voice_gen23.pd voice_gen24.pd voice_gen25.pd voice_gen26.pd voice_gen27.pd voice_gen28.pd voice_gen29.pd voice_gen30.pd voice_gen31.pd