@porres @timothyschoen whoops, I realised I compiled from the wrong source. Here's a failed compile with the 0.55-2 source.

Is it to do with float32 in some way?

else-compile-log2.txt

Hi, it's been a while, here we go:

RELEASE NOTES:

Hi, it's been almost 8 months without an update and I never took this long!!! So there's a lot of new stuff to cover, because it's not like I've been just sleeping around

The reason for the delay is that I'm trying to pair up with the release cycles of PlugData and we're having trouble syncing up. PlugData 0.9.0 came out recently after a delay of 6 months and we couldn't really sync and pair up then... we had no luck in syncing for a new update now, so now I'm just releasing it up cause enough is enough, and hopefully in the next plugdata release we can sync and offer the same version.

As usual, the development pace is always quite busy and I'm just arbitrarily wrapping things up in the middle of adding more and more things that will just have to wait.

First, I had promised support for double precision. I made changes so we can build for it, but it's not really working yet when I uploaded to deken and tested it. So, next time?

And now for the biggest announcement: - I'm finally and officially releasing a new pack as a submodule, which is a set of abstractions inspired by EuroRack Modules, so I'm thinking of VCV like things but into the Pd paradigm. Some similar stuff has been made for Pd over the years, most notably and famously "Automatonism", but I'm really proud of what I'm offering. I'm not trying to pretend Pd is a modular rack and I'm taking advantage of being in Pd. I'm naming this submodule "Modular EuroRacks Dancing Along" (💩 M.E.R.D.A 💩) and I've been working on it for a year and a half now (amongst many other things I do). PlugData has been offering this for a while now, by the way. Not really fully in sync though.

MERDA modules are polyphonic, thanks to multichannel connections introduced in Pd 0.54! There are 20 modules so far and some are quite high level. I'm offering a PLAITS module based on the Mutable Instruments version. I have a 6-Op Phase Modulation module. A "Gendyn" module which is pretty cool. I'm also including an "extra" module that is not really quite a modular thing at all but fits well called "brane", which was a vanilla patch I first wrote like 15 years ago and is a cool granular live sampler and harmonizer. You'll also find the basics, like oscillators, filters, ADSR envelope and stuff I'm still working on. Lastly, a cool thing is that it has a nice presets system that still needs more work but is doing the job so far.

There are ideas and plans to add hundreds more MERDA modules, let's see when and if I can. People can collaborate and help me and create modules that follow the template by the way

Thanks to Tim Schoen, [play.file~] is now a compiled object instead of an abstraction and it supports MP3, FLAC, WAV, AIF, AAC, OGG & OPUS audio file extensions. A new [sfload] object can import these files into arrays (but still needs lots of more work). There are many other player objects in ELSE that can load and play samples but these don't yet support these new formats (hang in there for the next version update).

Tim also worked on new [pdlink] and [pdlink~] objects, which send control and signal data to/from Pd instances, versions and even forks of Pure Data (it's like [send]/[receive] and [send~]/[receive~], all you need is a symbol, no complicated network or OSC configuration!). And yes, it works via UDP between different computers on the same network. And hell yeah, [pdlink~] has multichannel connections support! By the way, you can also communicate to a [pd~] subprocess. This will be part of ELSE and PlugData of course, and will allow easy communication between PlugData and Pd-Vanilla for instance.

The great pd-lib-build system has been replaced for a 'cmake' build process called 'pd.build' by Pierre Guillot. This was supposed to simplify things. Also, the [sfont~] object was a nightmare to build and with several dependencies that was simply hell to manage, now we have a new and much simpler system and NO DEPENDENCIES AT ALL!!! Some very rare file formats with obscure and seldom sound file extensions may not work though... (and I don't care, most and the 'sane' ones will work). The object now also dumps all preset information with a new message and backwards compatibility broke a bit

I'm now back to offering a modified version of [pdlua] as part of ELSE, which has recently seen major upgrades by Tim to support graphics and signals! This is currently needed in ELSE to provide a new version of [circle] that needed to be rewritten in lua so it'd look the same in PlugData. Ideally I'd hope I could only offer compiled GUI objects, but... things are not ideal

The lua loader works by just loading the ELSE library, no need for anything "else". I'm not providing the actual [pdlua] and [pdluax] objects as they are not necessary, and this is basically the only modification. Since PlugData provides support for externals in lua, if you load ELSE you can make use of stuff made for PlugData with lua without the need to install [pdlua] in Pd-Vanilla.

For next, we're working on a [lua] object that will allow inline scripting and will also work for audio signals (again, wait for the next version)! Also for the next version, I'm saving Ben Wesch's nice 3d oscilloscope made in lua (it'll be called [scope3d~]). There's a lot going on with the lua development, which is very exciting.

As for more actual new objects I'm including, we have [vcf2~] and [damp.osc~]. The first is a complex one pole resonant filter that provides a damping oscillation for a ringing time you can set, the next is an oscillator based on it. There's also the new [velvet~] object, a cool and multichannel velvet noise generator that you can also adjust to morph into white noise.

I wasn't able to add multichannel capabilities to many existing objects in ELSE in this one, just a couple of them ([cosine~] and [pimp~]). Total number of objects that are multichannel aware now are: 92! This is almost a third of the number of audio objects in ELSE. I think that a bit over half might be a reasonably desired target. More multichannel support for existing objects to come in the next releases.

Total number of objects in the ELSE library is now 551!

As for the Live Electronics tutorial, as usual, there are new examples for new objects, and I made a good revision of the advanced filter section, where I added many examples to better explain how [slop~] works, with equivalent [fexpr~] implementations.

Total number of examples in the Live Electronics Tutorial is now 528!

There are more details of course, and breaking changes as usual, but these are the highlights! For a full changelog, check https://github.com/porres/pd-else/releases/tag/v.1.0-rc12 (or below at this post).

As mentioned, unfortunately, ELSE RC12 is not yet fully merged, paired up and 100% synced in PlugData. PlugData is now at version 0.9.1, reaching the 1.0 version soon. Since ELSE is currently so tightly synced to the development of PlugData, the idea is to finally offer a final 1.0 version of ELSE when PlugData 1.0 is out. Hence, it's getting closer than ever Hopefully we will have a 100% synced ELSE/PlugData release when 0.9.2 is out (with a RC 13 maybe?).

Please support me on Patreon https://www.patreon.com/porres
You can follow me on instagram as well if you like... I'm always posting Pd development stuff over there https://www.instagram.com/alexandre.torres.porres/

cheers

ps. Binaries for mac/linux/windows are available via deken. I needed help for raspberry pi

CHANGELOG:

LIBRARY:

Breaking changes:

• [oscope~] renamed to [scope~]
• [plaits~] changed inlet order of modulation inputs and some method/flags name. If a MIDI pitch of 0 or less input is given, it becomes a '0hz'.
• [gbman~] changed signal output range, it is now filtered to remove DC and rescaled to a sane -1 to 1 audio range.
• [dust~] and [dust2~] go now up to the sample rate and become white noise (removed restriction that forced actual impulses, that is, no conscutive non zero values)
• [cmul~] object removed (this was only used in the old conv~ abstraction to try and reduce a bit the terrible CPU load)
• [findfile] object removed (use vanilla's [file which] now that it has been updated in Pd 0.55-0)
• [voices] swapped retrig modes 0 and 1, 'voices' renamed to 'n', now it always changes voice number by default as in [poly] (this was already happening unintentionally as a bug when one voice was already taken). The 'split' mode was removed (just use [route], will you?)
• [voices~] was also affected by changes in [voices] of course, such as 'voices' message being renamed to 'n'.
• [sr~]/[nyquist] changed output loading time to 'init' bang
• [sample~] object was significantly redesigned and lots of stuff changed, new messages and flags, added support for 64-bit audio files (Pd 0.55 in double precision and ELSE compiled for 64 bits is required for this). Info outlet now also outputs values for lenght in ms and bit depth.
• [sfont~] uses now a simpler build system and this might not load very very rare and unusual sound formats.

Enhancements/fixes/other changes:

• builds for double precision is now supposedly supported, by the way, the build system was changed from pd-lib-builder to pd.build by Pierre Guillot.
• [play.file~] is now a compiled object instead of an abstraction thanks to Tim Schoen, and it supports MP3, FLAC, WAV, AIF, AAC, OGG & OPUS file extensions.
• Support for double precision compilation was improved and should be working for all objects (not yet providing binaries and fully tested yet by the way).
• The ELSE binary now loads a modified version of [pdlua], but no [pdlua] and [pdluax] objects are provided.
• added signal to 2nd inlet of [rm~].
• fixed 'glide' message for [mono~].
• fixed [voices] consistency check bug in rightmost outlet and other minor bugs, added flags for 'n', 'steal' and offset.
• [gain~] and [gain2~] changed learn/forget shortcut
• [knob] fixed sending messages to 'empty' when it shouldn't, ignore nan/inf, prevent a tcl/tk error if lower and upper values are the same; added "learn/forget" messages and shortcut for a midi learn mechanism.
• [mpe.in] now outputs port number and you can select which port to listen to.
• Other MIDI in objects now deal with port number encoded to channel as native Pd objects. Objects affected are [midi.learn], [midi.in], [note.in], [ctl.in], [bend.in], [pgm.in], [touch.in] and [ptouch.in].
• [pi]/[e] now takes a value name argument.
• [sr~]/[nyquist~] take clicks now and a value name argument.
• fixed phase modulation issues with [impulse~] and [pimp~].
• [cosine~] fixed sync input.
• added multichannel features to [cosine~] and [pimp~].
• [plaits~] added a new 'transp' message and a functionality to allow MIDI input to supersede signal connections (needed for the 'merda' version [see below]), fixed MIDI velocity.
• [pluck~] added a new functionality to allow MIDI input to supersede signal connections (needed for the 'merda' version [see below]).
• 26 new objects, [velvet~], [vcf2~], [damp.osc~], [sfload], [pdlink] and [pdlink~], plus abstractions from a newly included submodule called "Modular Euro Racks Dancing Along" (M.E.R.D.A)! Warning, this is all just very very experimental still, the object are: [adsr.m~], [brane.m~], [chorus.m~], [delay.m~], [drive.m~], [flanger.m~], [gendyn.m~], [lfo.m~], [phaser.m~], [plaits.m~], [plate.rev.m~], [pluck.m~], [pm6.m~], [presets.m], [rm.m~], [seq8.m~], [sig.m~], [vca.m~], [vcf.m~] and [vco.m~] (6 of these are multichannel aware).

Objects count: total of 551 (307 signal objects [92 of which are MC aware] and 244 control objects)!

• 311 coded objects (203 signal objects / 108 control objects
• 240 abstractions (104 signal objects / 136 control objects)

TUTORIAL:

• New examples and revisions to add the new objects, features and breaking changes in ELSE.
• Added a couple of examples for network communication via FUDI and [pdlink]/[pdlink~]
• Section 36-Filters(Advanced) revised, added more examples and details on how [slop~] works.
• Total number of examples is now 528!

@porres like a raspi4 with a sick graphics card https://pi3g.com/commercial-comparison-nvidia-jetson-nano-raspberry-pi-coral-usb-coral-devboard/ i see it can run nn_tilde https://forums.developer.nvidia.com/t/embedded-realtime-neural-audio-synthesis-using-a-jetson-nano/236044

@zoebreed .pd_linux is an older (maybe just lazier now) way to name compiled extensions that run on linux (same as windows externals can show up as .dll) - .. but only one tho - its not saying arm/arm64/aarch64 for linux on microcomputer (or android, chrome laptop) or amd64/x86_64 for a regular laptop/desktop running linux .. so pure data will try loading it .. but unless its the right CPU it wont work .. the console errors can sometimes be helpful here

it looks like the intel jetson nano runs Jetson Linux which is Arm64 .. assume thats what you have on it? knowing that would help. .. so its compiled externals are (probably) compatible with Raspi 4 and up running Rasbian64 .. arm can be really tricky tho .. saw a download that had this many different versions for debian/ubuntu .. arm armhf armhfp armv7l armv7hl aarch64 based on OS and CPU and the capabilities of the OS ..

the way compiled exernals work - unless you have a cross compiler that can build for another CPU/ARCH and know how to do that on your own - you can only build the external on the operating system and cpu itself. so you'd build cyclone on the intel jetson nano, but if you built it on something else (besides a raspi4 or better running rasbian64) its probably a no go .. really why vanilla abstractions/externals are golden

you can find a lot of .pd_linux used on patches for critter and guitari orac/pocket piano 201/organelle which target microcomputers (inside the instruments) - the only compiled externals in the folder with the patch included will be for the micro - but named .pd_linux and maybe also mac for testing
.. so trying these probably wont work as they all target arm32 ..

here's the one to try putting in the folder with your patch (if its in the same folder as the patch just use [scale] - scale~.zip - I downloaded cyclone(v0.7-0)(Darwin-amd64-32)(Darwin-arm64-32)(Linux-amd64-32)(Linux-arm64-32)(Linux-armv6-32)(Windows-amd64-32).dek from https://deken.puredata.info and renamed it .zip to unzip it

here's a probably vanilla compatible from rj https://github.com/rjdj/rjlib
m_scale-help.pd m_scale.pd (just rename back to m_scale put them in the same folder as your patch and then use [m_scale arg arg arg arg] ..in pure data after changing a prepatched object to another one - you can even hit undo and redo and it will reconnect all the wires for you )

@zoebreed

assuming you are running PD on linux and not doing something with libpd like the bela (although the bela forum has a great thread about compiling externals)..

so because cyclone is a compiled external (opposed to a vanilla external that is an abstraction made up of objects just using pd vanilla) it will only work on the correct OS and CPU

for the OS
mac is darwin .d_
windows is msw .m_
linux is .l_
haiku is?
bsd is?

CPU/ARCH is
_fat = a mac thing - both types of mac (now adays the M1,2,3 and Intel, historically it was for PPC and Intel or 32bit and 64bit intel)
_amd64 = intel/amd/ (regular desktop or laptops)
_arm
_arm64 _aarch64
_riscv someday haha

but ARM is confusing because the raspi3 and earlier were 32bit only but raspi4 can be 32 or 64bit - so 32 or 64 depends on the OS and version of Pure Data..

• (assuming) Linux and ARM which can be called aarch64 / arm7 / arm64 / or arm for 32bit

you can cover your bases tho and stick them all together - compiled externals (if named correctly as we will see) can be together in the same folder so it will run on a mac, or windows, or linux laptop and then on a rasberry pi or jetson nano - pure data does a really good job of looking for the right one

but another tricky thing is where to put them - the easiest way to approach this is to put the compiled externals and their help in the same folder as your patch. you should also be able to put them in a named folder inside the patch /cyclone and call the externals with that folder first [cyclone/>~]

if you download the .dek file at the bottom here - its actually a zip ..

https://deken.puredata.info/info?url=http%3A%2F%2Fpuredata.info%2FMembers%2Fporres%2Fsoftware%2Fcyclone%2F0.7-0%2Fcyclone[v0.7-0](Darwin-amd64-32)(Darwin-arm64-32)(Linux-amd64-32)(Linux-arm64-32)(Linux-armv6-32)(Windows-amd64-32).dek

the easiest thing would be to put all these in the same folder as your patch or just put the ones for the OS and CPU/ARCH you are using

ps if you are just using the [>~ ] signal comparason objects you can use heavylib [>~] = [gt~] .. vanilla abstractions are objectsNamed.pd you call [objectsNamed] and have the same deal with foldering - easiest to keep them in the root of your patch. https://github.com/Wasted-Audio/heavylib

I tried on a Intel Imac, same problems with same shaders.
Now, I tried on a windows 10 machine... same problems again, only same 3 shaders works (like Bokeh)..

For bleach, the error is different from apple:

ofShader: setupShaderFromSource(): GL_FRAGMENT_SHADER shader failed to compile
: ofShader: GL_FRAGMENT_SHADER shader reports:
Fragment shader failed to compile with the following errors:
ERROR: error(#60) Unknown char: ""
ERROR: error(#273) 1 compilation errors.  No code generated


: //fragment program

uniform sampler2D Tex0;
uniform float GaussianBlur_Radius;
const float total = (1. + 8. + 28. + 56.) * 2. + 70.;   
                                                      
void main(void) 
{
    vec2 st = gl_TexCoord[0].st;
    vec4 color = vec4(0.0,0.0,0.0,0.0);
    color += (1. / total) * texture2D(Tex0, st - GaussianBlur_Radius * vec2(4. / 4., 0.));
    color += (8. / total)  * texture2D(Tex0, st - GaussianBlur_Radius * vec2(3. / 4., 0.));
    color += (28. / total)  * texture2D(Tex0, st - GaussianBlur_Radius * vec2(2. / 4., 0.));
    color += (56. / total)  * texture2D(Tex0, st - GaussianBlur_Radius * vec2(1. / 4., 0.));
    color +=  (70. / total) * texture2D(Tex0, st);
    color += (1. / total) * texture2D(Tex0, st + GaussianBlur_Radius * vec2(4. / 4., 0.));
    color += (8. / total)  * texture2D(Tex0, st + GaussianBlur_Radius * vec2(3. / 4., 0.));
    color += (28. / total)  * texture2D(Tex0, st + GaussianBlur_Radius * vec2(2. / 4., 0.));
    color += (56. / total)  * texture2D(Tex0, st + GaussianBlur_Radius * vec2(1. / 4.,ofShader: checkProgramLinkStatus(): program failed to link

ofShader: ofShader: program reports:
Fragment shader(s) were not successfully compiled before glLinkProgram() was called. Link failed.

Hello all,

I have recently stumbled into some problems compiling PD externals. I figured I would post here, it's a two part question

Compiling on/for Windows:
The first, and likely easier question, is I am trying to compile this external for the ES-5 encoder provided by Expert Sleepers for their DC coupled Eurorack interface:
https://github.com/expertsleepersltd/externals/tree/master/pd/es5encoder~

However, when I attempted to run the makefile I am encountering numerous errors that lead me to believe my environment isn't setup for compiling PD externals. Is there somewhere that outlines how to compile an external like this where there is limited/no documentation in the README? I don't know how generic of a process it is and if it's fairly standardized.

Second question:
I have a library that I would like to use with PDParty (iemmatrix) and I need to compile this into a static library to be able to use it on iOS. Is compiling to a static library drastically different than to a dynamic one? Are there limitations design wise that particular libraries might be incompatible with?

Sorry if the wording here is confusing at all. I haven't dealt much with compiling libraries for different platforms so I am a bit lost on some of the basics.

Any help, as always, is greatly appreciated

I'm trying to load the [ann] objects created by Davide Morelli, which @seb-harmonik.ar has uploaded on his GitHub and compiled it for OSX.
I'm using Linux so I had to compile myself. Since compiling with the makefile that comes with the library doesn't work, I tried the pd-lib-builder makefile and it did compile, but Pd still can't load the objects. In the README of the library it mentions that it has been built and only works with FANN 1.2, whereas FANN's latest version is 2.2.0 (and that's since 2012). I can't find any previous version of FANN, and I don't really know how to link this external to the current version of FANN.
Any ideas how to make this work?

@nuromantix yes anything written in pure data will be much slower than the equivalent algorithm in c, compiled as an external.
As an example every time something has to travel along a cord, that involves a function call whereas in c an assignment or memory access compiles to a simple cpu instruction.
Also, every computation in pd is done at runtime, whereas when you compile something the compiler can optimize so many things.

I wanted to build PD on Windows 10 to get ASIO support. I failed when I used the "Source" files from the PD website. I succeeded when I used source that I cloned from Github. I followed the same instructions from the wiki both when I failed and when I succeeded. (They are the same as in the manual, just a little more concise.)

I am sharing below my terminal output from the failed build attempts from the downloaded source code (the tar.gz file). Some of these messages suggest that there might be errors in the makefiles. I don't know anything about makefiles, so I can't really interpret the errors. But I did want to pass them along, in case a developer might find them useful. Here you go:

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ ./autogen.sh
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'm4/config'.
libtoolize: linking file 'm4/config/config.guess'
libtoolize: linking file 'm4/config/config.sub'
libtoolize: linking file 'm4/config/install-sh'
libtoolize: linking file 'm4/config/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4/generated'.
libtoolize: linking file 'm4/generated/libtool.m4'
libtoolize: linking file 'm4/generated/ltoptions.m4'
libtoolize: linking file 'm4/generated/ltsugar.m4'
libtoolize: linking file 'm4/generated/ltversion.m4'
libtoolize: linking file 'm4/generated/lt~obsolete.m4'
configure.ac:166: warning: The macro `AC_LIBTOOL_DLOPEN' is obsolete.
configure.ac:166: You should run autoupdate.
aclocal.m4:8488: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:166: the top level
configure.ac:166: warning: AC_LIBTOOL_DLOPEN: Remove this warning and the call to _LT_SET_OPTION when you
configure.ac:166: put the 'dlopen' option into LT_INIT's first parameter.
../autoconf-2.71/lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:8488: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:166: the top level
configure.ac:167: warning: The macro `AC_LIBTOOL_WIN32_DLL' is obsolete.
configure.ac:167: You should run autoupdate.
aclocal.m4:8523: AC_LIBTOOL_WIN32_DLL is expanded from...
configure.ac:167: the top level
configure.ac:167: warning: AC_LIBTOOL_WIN32_DLL: Remove this warning and the call to _LT_SET_OPTION when you
configure.ac:167: put the 'win32-dll' option into LT_INIT's first parameter.
../autoconf-2.71/lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:8523: AC_LIBTOOL_WIN32_DLL is expanded from...
configure.ac:167: the top level
configure.ac:168: warning: The macro `AC_PROG_LIBTOOL' is obsolete.
configure.ac:168: You should run autoupdate.
aclocal.m4:121: AC_PROG_LIBTOOL is expanded from...
configure.ac:168: the top level
configure.ac:182: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:182: You should run autoupdate.
../autoconf-2.71/lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:182: the top level
configure.ac:213: warning: The macro `AC_TYPE_SIGNAL' is obsolete.
configure.ac:213: You should run autoupdate.
../autoconf-2.71/lib/autoconf/types.m4:776: AC_TYPE_SIGNAL is expanded from...
configure.ac:213: the top level
configure.ac:235: warning: The macro `AC_CHECK_LIBM' is obsolete.
configure.ac:235: You should run autoupdate.
aclocal.m4:3879: AC_CHECK_LIBM is expanded from...
configure.ac:235: the top level
configure.ac:276: warning: The macro `AC_TRY_LINK' is obsolete.
configure.ac:276: You should run autoupdate.
../autoconf-2.71/lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
m4/universal.m4:14: PD_CHECK_UNIVERSAL is expanded from...
configure.ac:276: the top level
configure.ac:168: installing 'm4/config/compile'
configure.ac:9: installing 'm4/config/missing'
asio/Makefile.am: installing 'm4/config/depcomp'

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ autoupdate
configure.ac:182: warning: The preprocessor macro `STDC_HEADERS' is obsolete.
  Except in unusual embedded environments, you can safely include all
  ISO C90 headers unconditionally.
configure.ac:213: warning: your code may safely assume C89 semantics that RETSIGTYPE is void.
Remove this warning and the `AC_CACHE_CHECK' when you adjust the code.

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ ^C

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ ./configure
configure: loading site script /etc/config.site
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking build system type... x86_64-w64-mingw32
checking host system type... x86_64-w64-mingw32
configure: iPhone SDK only available for arm-apple-darwin hosts, skipping tests
configure: Android SDK only available for arm-linux hosts, skipping tests
checking for as... as
checking for dlltool... dlltool
checking for objdump... objdump
checking how to print strings... printf
checking whether make supports the include directive... yes (GNU style)
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe
checking if the linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /mingw64/bin/nm -B
checking the name lister (/mingw64/bin/nm -B) interface... BSD nm
checking whether ln -s works... no, using cp -pR
checking the maximum length of command line arguments... 8192
checking how to convert x86_64-w64-mingw32 file names to x86_64-w64-mingw32 format... func_convert_file_msys_to_w32
checking how to convert x86_64-w64-mingw32 file names to toolchain format... func_convert_file_msys_to_w32
checking for C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe option to reload object files... -r
checking for objdump... (cached) objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for dlltool... (cached) dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /mingw64/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for vfork.h... no
checking for dlfcn.h... no
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking for g++... g++
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... none needed
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe
checking if the linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) is GNU ld... yes
checking whether the g++ linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) supports shared libraries... yes
checking for g++ option to produce PIC... -DDLL_EXPORT -DPIC
checking if g++ PIC flag -DDLL_EXPORT -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether make sets $(MAKE)... (cached) yes
checking whether ln -s works... no, using cp -pR
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for windres... windres
checking for egrep... (cached) /usr/bin/grep -E
checking for fcntl.h... yes
checking for limits.h... yes
checking for malloc.h... yes
checking for netdb.h... no
checking for netinet/in.h... no
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for sys/ioctl.h... no
checking for sys/param.h... yes
checking for sys/socket.h... no
checking for sys/soundcard.h... no
checking for sys/time.h... yes
checking for sys/timeb.h... yes
checking for unistd.h... (cached) yes
checking for int16_t... yes
checking for int32_t... yes
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking for error_at_line... no
checking for fork... no
checking for vfork... no
checking for GNU libc compatible malloc... (cached) yes
checking for GNU libc compatible realloc... (cached) yes
checking return type of signal handlers... void
checking for dup2... yes
checking for floor... yes
checking for getcwd... yes
checking for gethostbyname... no
checking for gettimeofday... yes
checking for memmove... yes
checking for memset... yes
checking for pow... yes
checking for regcomp... no
checking for select... no
checking for socket... no
checking for sqrt... yes
checking for strchr... yes
checking for strerror... yes
checking for strrchr... yes
checking for strstr... yes
checking for strtol... yes
checking for dlopen in -ldl... no
checking for cos in -lm... yes
checking for CoreAudio/CoreAudio.h... no
checking for pthread_create in -lpthread... yes
checking for msgfmt... yes
checking for sys/soundcard.h... (cached) no
checking for snd_pcm_info in -lasound... no
configure: Using included PortAudio
configure: Using included PortMidi
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating asio/Makefile
config.status: creating doc/Makefile
config.status: creating font/Makefile
config.status: creating mac/Makefile
config.status: creating man/Makefile
config.status: creating msw/Makefile
config.status: creating portaudio/Makefile
config.status: creating portmidi/Makefile
config.status: creating tcl/Makefile
config.status: creating tcl/pd-gui
config.status: creating po/Makefile
config.status: creating src/Makefile
config.status: creating extra/Makefile
config.status: creating extra/bob~/GNUmakefile
config.status: creating extra/bonk~/GNUmakefile
config.status: creating extra/choice/GNUmakefile
config.status: creating extra/fiddle~/GNUmakefile
config.status: creating extra/loop~/GNUmakefile
config.status: creating extra/lrshift~/GNUmakefile
config.status: creating extra/pd~/GNUmakefile
config.status: creating extra/pique/GNUmakefile
config.status: creating extra/sigmund~/GNUmakefile
config.status: creating extra/stdout/GNUmakefile
config.status: creating pd.pc
config.status: executing depfiles commands
config.status: executing libtool commands
configure:

    pd 0.51.4 is now configured

    Platform:             MinGW
    Debug build:          no
    Universal build:      no
    Localizations:        yes
    Source directory:     .
    Installation prefix:  /mingw64

    Compiler:             gcc
    CPPFLAGS:
    CFLAGS:               -g -O2 -ffast-math -funroll-loops -fomit-frame-pointer -O3
    LDFLAGS:
    INCLUDES:
    LIBS:                 -lpthread

    External extension:   dll
    External CFLAGS:      -mms-bitfields
    External LDFLAGS:     -s -Wl,--enable-auto-import -no-undefined -lpd

    fftw:                 no
    wish(tcl/tk):         wish85.exe
    audio APIs:           PortAudio ASIO MMIO
    midi APIs:            PortMidi


bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ make
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/c/Useras/bhage/Downloads/pd-0.51-4/m4/config/missing' aclocal-1.16 -I m4/generated -I m4
configure.ac:170: error: AC_REQUIRE(): cannot be used outside of an AC_DEFUN'd macro
configure.ac:170: the top level
autom4te: error: /usr/bin/m4 failed with exit status: 1
aclocal-1.16: error: autom4te failed with exit status: 1
make: *** [Makefile:451: aclocal.m4] Error 1

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ make app
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/c/Users/bhage/Downloads/pd-0.51-4/m4/config/missing' aclocal-1.16 -I m4/generated -I m4
configure.ac:170: error: AC_REQUIRE(): cannot be used outside of an AC_DEFUN'd macro
configure.ac:170: the top level
autom4te: error: /usr/bin/m4 failed with exit status: 1
aclocal-1.16: error: autom4te failed with exit status: 1
make: *** [Makefile:451: aclocal.m4] Error 1

@idkei If it is not on Deken you can (easily under Linux...?) compile it for your system from source.

This one might not work...... I don't know...... as it is on GitHub under the Pd-l2ork fork, but you could try it. Help for compiling is in the Readme.... https://github.com/pd-l2ork/pd/tree/master/externals/creb

This one should work if the makefile will compile for 64 bits. It might need some tweeking if you get errors compiling....... http://zwizwa.be/darcs/creb/
David.