Hi,

Is anyone running pd .48 on their Raspberry Pi? I really want to get that going on mine. I'm way back on .46.2 and I am trying to upgrade.

If I do "sudo apt-get install puredata" in command line, will it upgrade my current version of pd? Or install a new version? If so how do I just do an upgrade of my current version?

This is a general question, what I also want to find out is how to compile a downloaded version manually.

This is what I tried so far, in trying to get an version of pd .48 on my RPi 3:

I went to this link:

http://msp.ucsd.edu/software.html

and went to "Older Stable Release, Newest not Yet Compiled"

and clicked on the Raspberry Pi 2 or 3 link.

I downloaded a folder of pd-0.48-1

in terminal i cd a path to that folder.

I read the install text which says to run: ./autogen.sh

I see autogen.sh in the folder. When I run ./autogen.sh i get back:

" ./autogen.sh: 21: ./autogen.sh: autoreconf: not found"

Any suggestions as to what to do?

thank you in advance for any help.

Nick

I don't know what happened... Try it... I make a fresh Raspbian with Pd and Purr data installed on it, I will share it when upload ends. Perhaps it can work.

@nicnut I tested this Raspian with Pd and Purr Data installed image. I tested it in my RPi2 and it should work with SD Cards bigger than 8 Gb.

I'm crossing my fingers for you!!! Now it is my last chance to help you! hehehehe

@emviveros thank you so much for all your help and advice!!

I hope this works. I tried updating automake and had problems and errors with that too. I can't seem to install anything in the tarball method. I hope your disk image works. I'll try it out and let you know what happens.

@nicnut Tarball seems to be a problem with Stretch...... https://www.raspberrypi.org/forums/viewtopic.php?t=207529 so unzipping elsewhere might be the only option. You might find more help on that forum for your problem.

It will be my problem at some point too.! But there are many changes in Stretch that can trip you up....... https://www.debian.org/releases/stable/amd64/release-notes/ch-information.en.html...... in particular 5.3 > 5.3.2

It is interesting that the Pi started life as a learning tool for Noobs...... and at this rate will end its life as a brick that can only be opened by experts.

Good luck!
David.

@emviveros thank you for the disk image! it works and I have pd .49 on there, plus all the other pd related stuff I saw on there. Thank You!

I can see how much I have been missing out on using pd .46. Now I can use the dekken search feature too. I will have to install all this other stuff I have installed on my other Pi disk image so this will take me awhile. Hopefully that will work out.

@whale-av I totally agree. Using a RPi can be easy and a very affordable way to have a computer. But if it is this difficult so simply install a new version of the software something is really wrong. I can use apt-get to install software, but any other method has been impossible for me. If I didn't get the disk image from @emviveros I wouldn't be able to run pd .49 and that is very unfortunate. I wish apt-get would be more up to date, and that the Pi in general was way more user friendly. Everything takes me forever to figure out how to do on the Pi.

Anyway, I am very thankful for the advice available on this forum.

@emviveros thanks for this tutorial - it worked perfectly on my rpi2 - i'm now running pd vanilla 0.49 on my rpi, very useful x

hey @robbielongcat and @emviveros. I was thinking about starting another thread on Raspberry Pi and Pure data. This disk image does work great, but I am sort of annoyed at how much work it is to connect Pd and Midi controllers using this disk image. You have to do all these commands in terminal using aconnect ( i've researched this for like months). On my old disk image (Raspian I think) you can just have it set and saved and Pd automatically connects to my midi controller when it opens.

I was wondering if there are other good OS options for Rpi and Pd. I was going to download a couple and experiment to see if there are any that automatically connect as my old disk image did. If any one has thoughts on this please chime in.

Nick

Great @nicnut Well I was working in another image.. Even smaller... With Pd 0.49 and Purr data pre installed.. I already did not tried to use midi in these... But we can start it and post another image with these hacks out of the box!

sorry to revive dead thread - just a huge thx to emviveros for the tuto. i have .51-0 on my pi now.

@dakota, yeah this thread was major help. I remember how crazy frustrating it was.

@dakota Nice!!!

Now I updated tutorial to compile 0.51-0 Pd version!

@emviveros Awesome. I was just about to research how to get .51 on my Pi. I only have .50 on it now.

thank you

@emviveros Hey. This tutorial worked for me. The only thing that didn't work was step 3.

I had to leave out the link to msp.ucsp.edu. etc.
I intalled everything else. They I went to the site on a browser and downloaded the file. Then I moved it to /home/pi/src then I did all the other steps, and pd opened.

In some crazy way I made a desktop file that opens to Pd, but I sort of did it on accident. Anyway thank you again for this great tutorial and now I am up to date.

i posted above but just wanted to say - again - how invaluable this resource is @emviveros. thank you so much.

if anyone would care to update this thread (for us non-developer-types) with a way to put a pd icon on the desktop, it would be a nice addition. not essential, but would really make this resource complete and a one-stop-shop.

j

Just a note that if you are trying to install pd 0.51-4 using Raspbian Bookworm,

sudo apt install libfftw3-3

in Step 3 of @emviveros's instructions will not work.

However, you can get around this by installing each of libfftw3-3's dependencies, which can be found here: https://packages.debian.org/buster/libfftw3-3

After this, you can proceed as normal and pd will install.

It's also worth noting at when pd is installed it goes to usr/local/bin (at least when I've done it). From here you can create a link to the pd-gui bash file to create a logo shortcut. If I have time I'll make instructions, for those who wants something a bit more user friendly...