I made a Pd instrument with a Raspberry pi and arcade buttons. The buttons are connected to the Pi’s gpio, and now I’m trying to interface them with Pure Data.

There’s the disis_gpio external in Purr data, but I’m having trouble since it seems more suited to output. For triggering events in real time, I’d have to set a metro object to constantly refresh disis_gpio. Will that create a lot of CPU overhead?

Besides that, I’m just lost trying to use it with button input. I found out that the pin numbering is not the same numbering in RPi’s documentation, gpio drivers might need to be started manually, and I’m unsure if the external includes or needs the wiringpi library.

Usually I can trial and error these things, but I have no idea where to start troubleshooting. Any advice on using disis_gpio for this? Are there alternatives? I know there’s Pd-wiringpi, but it also doesn’t use the library’s interrupt thread for input. I’ve heard of Miller’s own GPIO object, but I believe that’s only part of an outdated Raspbian image he created a while back.

Update: wiringpi’s gpio utlity works fine, but it isn’t loaded by modprobe as that link says to do. The Disis_gpio help patch is all errors trying to locate pins. This is when running as sudo, which Pdwiringpi recommends so it can read pins directly. Root disis_gpio looks for pins in the same slow way as non-sudo Pdwiringpi, but it fails to find the gpio directories in the error messages.

The k12 module flag doesn’t seem to do anything as far as I can tell. I know updates to wiringPi have broken the object before, but I have no idea what’s going on. Puckette’s gpio object and PdwiringPi are outdated and difficult to figure out. So a simple gpio netsend script seems like it would be far easier and more reliable.

Another update, because I finally figured this out and haven’t seen a proper solution anywhere else. So if someone else searches for how to do this, hopefully this will help.

Go install adafruit’s retrogame script. Assign pins to keyboard keys (there’s a list of game specific keys you use), and use the various key objects in Pd to read the values triggered by buttons. Its simple and foolproof, the script runs on boot and is written in C, keyboards and key objects will always work, and its built right into linux and raspbian. No python, no figuring out which of the many ways to script works best for real-time, no ports or servers, no buggy externals that depend on and get broken by other libraries, it just works.

I realise I'm responding to a 5 year old post here but:

has anyone had success with using the retrogame script recently? I've installed it on a Pi and it just does not seem to convert my GPIO button press into a keyboard input. If I look at GPIO status I can see it changing when I press the button, but there is no keypress generated anywhere.

@yannseznec I tried it once but haven't had luck. Also tried the mcp3008 with GPIO but.. idk the chip got super hot and smelled like plastic. I think I put the ribbon cable the wrong way. Anyway- let me know if you have success with this. Getting all the gpio pin errors with wiringPi. I know it's deprecated.. and with a pi5 idk. Think I need to flash my sdcard and start over and stick to one method. Have an Arduino nano and can't get that to work in pd either but that's a different story. It's worked in the past. I need a version of grasshopper java learning app but it teaches Python instead. Sorry to rant, anyway huge fan of pure data. Used it to make an on-air light at my job with midi and osc last year! I need to post it somewhere.

Could be wrong, but it sounds like wiringpi works with the pi5 now- can anyone confirm/contest?
When I looked into it about a year ago it seemed pretty far away... Thought it'd be cool to have pd on a pi5 for DIY hardware projects. No teensy/arduino/middleman to get sensor values.

just saw this post and didn`t noticed its actually already on the top.

I am basically running into the same issue.

Basically, I want to send button inputs, and later rotary encoder values to a Pure Data patch running on a Raspberry Pi via GPIO.

I managed to get the button working, and it's definitely sending data over UDP or TCP, that part works fine.

But Pure Data just doesn't receive anything. I've mostly tried using [netreceive], but I get nothing.
I am also not sure if UDP/TCP is the right way to go?

Are there any news on how to get this working or is there a python script out there which could help me?
I am surprised after almost 8 years there is still no easy solution to this?

@impression If it is definitely sending then tcp and udp should work if you have specified the same port and the same format (tcp or udp) for both the send and receive..
If you put a [print] on the left outlet of [netreceive] you should see some data arrive.
Assuming you are not trying to receive on another (second) RPI, in which case you will need to tell the GPIO RPI the IP address of the second RPI as well as the port.
David.

So typical, I tried whole day yesterday and now that I wrote into the forum I got it working.
I basically installed python-osc and in pure data I am using mrpeach/udpreceive. That worked for me.
Thanks for your help though

@impression Good news..!
Yes, the MrPeach objects take care of string, float etc formats without us needing to get involved in such details.. They are very useful.
David.