@cfry said:

The problem that arise is that when I start to improvise I kind of "break the (your) concept". And I would like to avoid ending up in another patch that is so messy that I can not use it if I bring it up after a half a year or so. Lets continue working on it!

You are definitely getting parts of it and seeing how to develop it but there are parts you don't quite have yet and I can't quite identify what those are so I can explain things. I made a sizable patch that adds a lot of commands but last night I realized I went to far and it would probably confuse things for you, so I will reduce it down to just the things you mentioned, I will follow your lead.

Passing the text name as an argument is just a matter of using your dollar arguments, [text get $1], but you will want to tweak your input for text symbols some.

So our right inlet for text symbols goes to a send now so we can easily access that text anywhere in the patch, like in our commands, and we also reset the counter which uses a value for its float for the same reason, we will want to be able to access and change its value from commands. "pc" is short for program counter and it is important that we increment its value before sending a float to the text get otherwise if we change its value in some command it will get overwritten, so having a [t f f] here is almost a must. This also means that [v $0pc] points to the next line to be run and not the one that is currently being run, this is important, fairly useful, and occasionally irksome.

The left inlet has change some as well, we have a [route bang float], bangs and floats go to the counter so we can increment the program or set the next line to be run, the right outlet sends to our [list-drip] which enables us to run commands from the parent patch so when things don't work you can run that print command to print the stack and get some insight or just run commands from a listbox to test things out or whatnot. We also have [r $0bang] on the counter, this lets us increment the counter immediately from a command and start the next line. And finally we have a new outlet that bangs when we reach the end of the text file so we can turn off the metro in the parent patch which is doing the banging, reset the counter to zero, load a new program, or what ever you want to do when the program completes. Middle outlet I did away with, globals can be done as a command, as can most everything.

Variables we can implement with some dynamic patching and a simple abstraction to create the commands for setting and getting the value of any variable.

This looks more complicated than it is. If we have the line var val1 10 in our program it runs the var command which bangs [v $0pc] and subtracts 1 from it to get the current line from the text holding our program and then appends our $0 to it giving us the list var val1 10 $0. The first message it goes to creates an instance of the var.pd abstraction in [pd $0var] with the second and fourth elements of the list as arguments, val1 and $0. Second message sends $3 to $4->$2, 10 to $0->val1. To finish off we use that new $0bang receive to bang [v $0pc] so we don't execute the rest of the line which would run val1 pushing 10 to the stack and then push another 10 to the stack. Variable name with a > prepended to it is the command for setting the value of a variable, 22 >val1 in your program would set the value of val1 to 22, val1 would push 22 to the stack. If we could see how pd expands all those dollar arguments in the abstraction it would look like this:

Now you can create as many variables as you would like in your programs and a couple tweaks you can have the abstraction global.pd and subpatch [pd $0globals] so you can have the line global val2 0 and get a global variable that all instances of tracky can read and write from. There are a couple catches, each variable definition must appear on its own line with nothing else after it and with our simple parsing there is nothing to stop you from creating multiple instances of the same variable, if you run the line var val1 10 a second time it will create a second abstraction so when you run val1 it will bang both and each will push 10 to the stack giving you an extra 10 and screw up your program. We can fix this with adding a registry to the var command which searches a [text] to see if it has been created already, something like this after the [list $0] should do it:

And you will want to create a command to clear all variables (and the text if you use it) by sending [clear( to [pd-$0var], or get fancy and add another command in var.pd which bangs [iemguts/canvasdelete] so you can delete individual variables. Using [canvasdelete] has the advantage of not needing a registry for variables, you can just always run ```delete-<variable name>, or what ever you name your delete command, before creating a new variable. Each method has advantages.

Your loop does not work because the unpack needs to go into the left inlet of the float, that triggers the first loop and causes it to go back, each time the program gets back up to the loop command it increments [v $0loopi] until the select hits the target number of loops which sets $0loopi to -1 which ends the looping.

Not sure what you mean by groups/exclusive groups, can you elaborate or show it with a patch?

None of the above has been tested, but I did think them through better than I did the loop, fairly certain all is well but there might be a bug or two for you to find. Letting you patch them since we think about how things work more when we patch than when we use a patch. Try and sort out and how they work from the pictures and then patch them together without the pictures, following your understanding of them instead of your memory of how I did it. And change them as needed to suit your needs.

Hi,

I am trying to get ofelia to run on a couple of rpi. Right now I am trying a rpi 3B+ running https://blokas.io/patchbox-os/

I run ofeila with the ofelia-fast-prototyping abs on my mac successfully.

Following install instructions here https://github.com/cuinjune/Ofelia
after running
sudo ./install_dependencies.sh
it ends like this:

detected Raspberry Pi
installing gstreamer omx
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
gstreamer1.0-omx is already the newest version (1.0.0.1-0+rpi12+jessiepmg).
The following package was automatically installed and is no longer required:
  raspinfo
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Updating ofxOpenCV to use openCV4
sed: can't read /home/patch/Documents/Pd/externals/addons/ofxOpenCv/addon_config.mk: No such file or directory
sed: can't read /home/patch/Documents/Pd/externals/addons/ofxOpenCv/addon_config.mk: No such file or directory

When running the example patches in Pd I get this in PD console:

opened alsa MIDI client 130 in:1 out:1
JACK: cannot connect input ports system:midi_capture_1 -> pure_data:input_2
/home/patch/Documents/Pd/externals/ofelia/ofelia.l_arm: libboost_filesystem.so.1.67.0: cannot open shared object file: No such file or directory
 ofelia d $0-of
... couldn't create
/home/patch/Documents/Pd/externals/ofelia/ofelia.l_arm: libboost_filesystem.so.1.67.0: cannot open shared object file: No such file or directory
 ofelia d $0-of
... couldn't create
/home/patch/Documents/Pd/externals/ofelia/ofelia.l_arm: libboost_filesystem.so.1.67.0: cannot open shared object file: No such file or directory
 ofelia d $0-of
... couldn't create
/home/patch/Documents/Pd/externals/ofelia/ofelia.l_arm: libboost_filesystem.so.1.67.0: cannot open shared object file: No such file or directory
 ofelia d $0-of
... couldn't create
/home/patch/Documents/Pd/externals/ofelia/ofelia.l_arm: libboost_filesystem.so.1.67.0: cannot open shared object file: No such file or directory
 ofelia d $0-of
... couldn't create
/home/patch/Documents/Pd/externals/ofelia/ofelia.l_arm: libboost_filesystem.so.1.67.0: cannot open shared object file: No such file or directory
 ofelia f ;
 ofBackground(20) ;
 ofSetSmoothLighting(true) ;
 ofSetSphereResolution(24) ;
 local width , height = ofGetWidth() * 0.12 , ofGetHeight() * 0.12 ;
 sphere = ofSpherePrimitive() ;
 sphere:setRadius(width) ;
 icoSphere = ofIcoSpherePrimitive() ;
 icoSphere:setRadius(width) ;
 plane = ofPlanePrimitive() ;
 plane:set(width * 1.5 , height * 1.5) ;
 cylinder = ofCylinderPrimitive() ;
 cylinder:set(width * 0.7 , height * 2.2) ;
 cone = ofConePrimitive() ;
 cone:set(width * 0.75 , height * 2.2) ;
 box = ofBoxPrimitive() ;
 box:set(width * 1.25) ;
 local screenWidth , screenHeight = ofGetWidth() , ofGetHeight() ;
 plane:setPosition(screenWidth * 0.2 , screenHeight * 0.25 , 0) ;
 box:setPosition(screenWidth * 0.5 , screenHeight * 0.25 , 0) ;
 sphere:setPosition(screenWidth * 0.8 , screenHeight * 0.25 , 0) ;
 icoSphere:setPosition(screenWidth * 0.2 , screenHeight * 0.75 , 0) ;
 cylinder:setPosition(screenWidth * 0.5 , screenHeight * 0.75 , 0) ;
 cone:setPosition(screenWidth * 0.8 , screenHeight * 0.75 , 0) ;
 pointLight = ofLight() ;
 pointLight:setPointLight() ;
 pointLight:setDiffuseColor(ofFloatColor(0.85 , 0.85 , 0.55)) ;
 pointLight:setSpecularColor(ofFloatColor(1 , 1 , 1)) ;
 pointLight2 = ofLight() ;
 pointLight2:setPointLight() ;
 pointLight2:setDiffuseColor(ofFloatColor(238 / 255 , 57 / 255 , 135 / 255)) ;
 pointLight2:setSpecularColor(ofFloatColor(0.8 , 0.8 , 0.9)) ;
 pointLight3 = ofLight() ;
 pointLight3:setPointLight() ;
 pointLight3:setDiffuseColor(ofFloatColor(19 / 255 , 94 / 255 , 77 / 255)) ;
 pointLight3:setSpecularColor(ofFloatColor(18 / 255 , 150 / 255 , 135 / 255)) ;
 material = ofMaterial() ;
 material:setShininess(120) ;
 material:setSpecularColor(ofFloatColor(1 , 1 , 1)) ;
... couldn't create
/home/patch/Documents/Pd/externals/ofelia/ofelia.l_arm: libboost_filesystem.so.1.67.0: cannot open shared object file: No such file or directory
 ofelia f ;
 pointLight = nil ;
 pointLight2 = nil ;
 pointLight3 = nil ;
 collectgarbage() ;
... couldn't create
/home/patch/Documents/Pd/externals/ofelia/ofelia.l_arm: libboost_filesystem.so.1.67.0: cannot open shared object file: No such file or directory
 ofelia f ;
 local width , height , time = ofGetWidth() , ofGetHeight() , ofGetElapsedTimef() ;
 pointLight:setPosition((width * 0.5) + math.cos(time * 0.5) * (width * 0.3) , height / 2 , 500) ;
 pointLight2:setPosition((width * 0.5) + math.cos(time * 0.15) * (width * 0.3) , height * 0.5 + math.sin(time * 0.7) * height , -300) ;
 pointLight3:setPosition(math.cos(time * 1.5) * width * 0.5 , math.sin(time * 1.5) * width * 0.5 , math.cos(time * 0.2) * width) ;
... couldn't create
/home/patch/Documents/Pd/externals/ofelia/ofelia.l_arm: libboost_filesystem.so.1.67.0: cannot open shared object file: No such file or directory
 ofelia f ;
 local spinX = math.sin(ofGetElapsedTimef() * 0.35) ;
 local spinY = math.cos(ofGetElapsedTimef() * 0.075) ;
 ofEnableDepthTest() ;
 ofEnableLighting() ;
 pointLight:enable() ;
 pointLight2:enable() ;
 pointLight3:enable() ;
 material:beginMaterial() ;
 plane:rotateDeg(spinX , 1 , 0 , 0) ;
 plane:rotateDeg(spinY , 0 , 1 , 0) ;
 plane:draw() ;
 box:rotateDeg(spinX , 1 , 0 , 0) ;
 box:rotateDeg(spinY , 0 , 1 , 0) ;
 box:draw() ;
 sphere:rotateDeg(spinX , 1 , 0 , 0) ;
 sphere:rotateDeg(spinY , 0 , 1 , 0) ;
 sphere:draw() ;
 icoSphere:rotateDeg(spinX , 1 , 0 , 0) ;
 icoSphere:rotateDeg(spinY , 0 , 1 , 0) ;
 icoSphere:draw() ;
 cylinder:rotateDeg(spinX , 1 , 0 , 0) ;
 cylinder:rotateDeg(spinY , 0 , 1 , 0) ;
 cylinder:draw() ;
 cone:rotateDeg(spinX , 1 , 0 , 0) ;
 cone:rotateDeg(spinY , 0 , 1 , 0) ;
 cone:draw() ;
 material:endMaterial() ;
 ofDisableLighting() ;
 ofDisableDepthTest() ;
... couldn't create

Thankful for help!

@60hz said:

It works for me, but you certainly need to refresh the [number 15( message AFTER create the [pd boid] subpatches creation.

Also, here is a better version using [clone] object that has been part of puredata and makes the design more convienient.

(Note that boids Gem examples need [poltocar] object fom cyclone to work well)

boids2d_clone_Gem_example.zip

Hi, your patch works fine, the boids move correctly, but when I increase their number for example from 15 to 115, also doing the "refresh after..." as you said, the boids increase but stay still, they don't move.
Now, when I open your patch, I get these errors:

--------------------------------------------------------------------
:: Cyclone 0.6-1; Released june 8th 2022
:: License: BSD-3-Clause (aka Revised BSD License)
:: Copyright © 2003-2021 - Krzysztof Czaja, Hans-Christoph Steiner,
:: Fred Jan Kraan, Alexandre Porres, Derek Kwan, Matt Barber
:: and others.
:: -----------------------------------------------------------------
:: Cyclone 0.6-1 needs at least Pd 0.52-0
             (you have 0.52-1, you're good!)
:: Loading the cyclone library did the following:
::   - A) Loaded the non alphanumeric objects, which are:
:: [!-], [!-~], [!/], [!/~], [!=~], [%~], [+=~], [<=~], [<~],
:: [==~], [>=~] and [>~]
::   - B) Added /home/a/Pd/externals/cyclone
:: to Pd's path so the other objects can be loaded too
:: but use [declare -path cyclone] to guarantee search priority
:: in the patch
--------------------------------------------------------------------

opened alsa MIDI client 130 in:1 out:1
declare: Gem: unknown declaration
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
 canvas.top
... couldn't create
boids2d 2005-2006 a.sier / jasch    1995-2003 eric l. singer   Jan  1 2023 13:49:25

These are my startup paths:

** [poltocar]** object appears to be in place:

a@a:~$ cd /home/a/Pd/externals/cyclone
a@a:~/Pd/externals/cyclone$ ls
[CUT]          

poltocar.d_fat           
poltocar~.d_fat          
poltocar-help.pd        
poltocar~-help.pd        
poltocar.l_amd64        
poltocar~.l_amd64        
poltocar.l_arm           
poltocar~.l_arm        
poltocar.l_i386         
poltocar~.l_i386         
poltocar.m_amd64        
poltocar~.m_amd64        
poltocar.m_i386          
poltocar~.m_i386        
           
[CUT]

Something is probably missing or i am doing something wrong.

Bye,
a.

------------------ done with main ----------------------
Connection from 'pd' to 'pd-gui' on 127.0.0.1:58808
Tk 8.6.8
Detected font: DejaVu Sans Mono
Using font: DejaVu Sans Mono bold
Loading plugin: /usr/lib/puredata/tcl/pd_deken.tcl
[deken] Platform detected: Linux-i686-32bit
Loading plugin: /usr/lib/puredata/tcl/pd_docsdir.tcl
[deken] Platform re-detected: Linux-i386-32bit
The Pd window filtered 11 lines
Pd documents directory: /root/Pd
The Pd window filtered 13 lines
menu_doc_open /root/Pd/externals/Gem/examples/06.particle 02.fountain.pd
gemreceive __gem_render $1
... couldn't create
... you might be able to track this down from the Find menu.
gemreceive __gem_render_osd $1
... couldn't create
gemlist
... couldn't create
GEMglColor4f 1 1 1 1
... couldn't create
GEMglMaterialfv GL_FRONT_AND_BACK GL_AMBIENT 0.2 0.2 0.2 1
... couldn't create
GEMglMaterialfv GL_FRONT_AND_BACK GL_DIFFUSE 0.8 0.8 0.8 1
... couldn't create
GEMglMaterialfv GL_FRONT_AND_BACK GL_EMISSION 0 0 0 1
... couldn't create
GEMglMaterialfv GL_FRONT_AND_BACK GL_SPECULAR 0 0 0 1
... couldn't create
GEMglMaterialfv GL_FRONT_AND_BACK GL_SHININESS 0
... couldn't create
GEMglPushMatrix
... couldn't create
GEMglPopMatrix
... couldn't create
GEMglFlush
... couldn't create
gemlist
... couldn't create
part_head
... couldn't create
part_color
... couldn't create
part_draw
... couldn't create
part_size 1
... couldn't create
part_gravity 0 -0.01 0
... couldn't create
part_velocity sphere 0 0.2 0 0.2
... couldn't create
part_source 25
... couldn't create
part_killold 45
... couldn't create
gemglutwindow
... couldn't create
GLdefine GL_LINEAR
... couldn't create
GLdefine GL_EXP
... couldn't create
GLdefine GL_EXP2
... couldn't create
GLdefine GL_COLOR_BUFFER_BIT
... couldn't create
GLdefine GL_DEPTH_BUFFER_BIT
... couldn't create
GLdefine GL_STENCIL_BUFFER_BIT
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMglMatrixMode GL_PROJECTION
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMglFrustum -1 1 -1 1 1 20
... couldn't create
GEMglViewport 0 0 500 500
... couldn't create
GEMglDisable GL_FOG
... couldn't create
GEMglEnable GL_FOG
... couldn't create
GEMglFogf
... couldn't create
GLdefine GL_FOG_DENSITY
... couldn't create
GEMglFogf
... couldn't create
GLdefine GL_FOG_MODE
... couldn't create
GEMglFogf
... couldn't create
GLdefine GL_FOG_START
... couldn't create
GEMglFogf
... couldn't create
GLdefine GL_FOG_END
... couldn't create
GEMglFogfv
... couldn't create
GLdefine GL_FOG_COLOR
... couldn't create
GEMglDisable GL_COLOR_MATERIAL
... couldn't create
GEMglDisable GL_AUTO_NORMAL
... couldn't create
GEMglDisable GL_NORMALIZE
... couldn't create
GEMglShadeModel GL_FLAT
... couldn't create
GEMglLightModeli
... couldn't create
GLdefine GL_LIGHT_MODEL_TWO_SIDE
... couldn't create
GLdefine GL_FALSE
... couldn't create
GEMglLightModeli
... couldn't create
GLdefine GL_LIGHT_MODEL_TWO_SIDE
... couldn't create
GLdefine GL_TRUE
... couldn't create
GEMglEnable GL_LIGHTING
... couldn't create
GEMglEnable GL_COLOR_MATERIAL
... couldn't create
GEMglEnable GL_AUTO_NORMAL
... couldn't create
GEMglEnable GL_NORMALIZE
... couldn't create
GEMglShadeModel GL_SMOOTH
... couldn't create
GEMglMaterialfv GL_FRONT_AND_BACK GL_AMBIENT 0.1 0.1 0.1 1
... couldn't create
GEMglMaterialfv GL_FRONT_AND_BACK GL_SPECULAR 1 1 1 1
... couldn't create
GEMglMaterialfv GL_FRONT_AND_BACK GL_SHININESS 100
... couldn't create
GEMglDisable GL_LIGHTING
... couldn't create
GEMglClearColor
... couldn't create
GEMglClear 17664
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglDisable GL_LIGHTING
... couldn't create
GEMglViewport 0 0 500 500
... couldn't create
GEMglMatrixMode GL_PROJECTION
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglFrustum -1 1 -1 1 1 20
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLineWidth 2
... couldn't create
GEMglColor3f 1 1 1
... couldn't create
GEMglBegin GL_LINES
... couldn't create
GEMglVertex2f 0 -6
... couldn't create
GEMglVertex2f 0 6
... couldn't create
GEMglEnd
... couldn't create
GEMglLineWidth 1
... couldn't create
GEMglMatrixMode GL_PROJECTION
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMglFrustum -1 1 -1 1 1 20
... couldn't create
GEMglViewport 0 0 250 500
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglMatrixMode GL_PROJECTION
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMglFrustum -1 1 -1 1 1 20
... couldn't create
GEMglViewport 0 0 250 500
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
gemlist
... couldn't create
gemlist
... couldn't create
GEMglGetFloatv GL_STEREO
... couldn't create
GEMglColorMask 1 1 1 1
... couldn't create
GEMglFrustum -1 1 -1 1 1 20
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglFrustum -1 1 -1 1 1 20
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglColorMask 1 1 1 1
... couldn't create
GEMglColorMask 1 1 1 1
... couldn't create
GEMglClear
... couldn't create
GEMglClear
... couldn't create
GEMglClear
... couldn't create
GEMglClear
... couldn't create
GLdefine GL_COLOR_BUFFER_BIT
... couldn't create
GLdefine GL_DEPTH_BUFFER_BIT
... couldn't create
GLdefine GL_STENCIL_BUFFER_BIT
... couldn't create
GLdefine GL_ACCUM_BUFFER_BIT
... couldn't create
gemlist
... couldn't create
gemlist
... couldn't create
GEMglColorMask 1 1 1 1
... couldn't create
GEMglFrustum -1 1 -1 1 1 20
... couldn't create
GEMglMatrixMode GL_PROJECTION
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglFrustum -1 1 -1 1 1 20
... couldn't create
GEMglMatrixMode GL_PROJECTION
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglLoadIdentity
... couldn't create
GEMgluLookAt 0 0 4 0 0 0 0 1 0
... couldn't create
GEMglDrawBuffer GL_BACK_LEFT
... couldn't create
GEMglClear
... couldn't create
GLdefine GL_COLOR_BUFFER_BIT
... couldn't create
GLdefine GL_DEPTH_BUFFER_BIT
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglDrawBuffer GL_BACK_RIGHT
... couldn't create
GEMglClear
... couldn't create
GLdefine GL_COLOR_BUFFER_BIT
... couldn't create
GLdefine GL_DEPTH_BUFFER_BIT
... couldn't create
GEMglMatrixMode GL_MODELVIEW
... couldn't create
GEMglClear
... couldn't create
GLdefine GL_DEPTH_BUFFER_BIT
... couldn't create
gemlist
... couldn't create
gemlist
... couldn't create
GEMglReportError
... couldn't create
gemlist
... couldn't create

It still does not work.

I added my-guitar-rig/my-guitar-rig~ to a window and it generated a lot of errors

I am running version 0.52.1 of pd

Hopefully this is helpful. The errors I got are:

 z~ 64
... couldn't create
 limiter~ 98 1
... couldn't create
io pair already connected
delay(wavey)(v).pd 39 0 40 0 (snapshot~->gatom) connection failed
 tof/pmenu 1 1 black white red
... couldn't create
 tof/pmenu 1 1 black white red
... couldn't create
 z~ 64
... couldn't create
 limiter~ 98 1
... couldn't create
io pair already connected
delay(wavey)(v).pd 39 0 40 0 (snapshot~->gatom) connection failed
 tof/pmenu 1 1 black white red
... couldn't create
 tof/pmenu 1 1 black white red
... couldn't create
 z~ 64
... couldn't create
 limiter~ 98 1
... couldn't create
io pair already connected
delay(wavey)(v).pd 39 0 40 0 (snapshot~->gatom) connection failed
 tof/pmenu 1 1 black white red
... couldn't create
 tof/pmenu 1 1 black white red
... couldn't create
 z~ 64
... couldn't create
 limiter~ 98 1
... couldn't create
 date
... couldn't create
 time
... couldn't create
 z~ 64
... couldn't create
 limiter~ 98 1
... couldn't create
 mknob 42 0 0 1 0 0 empty empty ratio:1.5:1 -2 -6 0 10 -262144 -1 -1 20175 1
... couldn't create
 tof/pmenu 1 1 black white red
... couldn't create
pd-float: rounding to 2048 points
warning: fx3000-in-2: multiply defined
warning: fx3000-in-2: multiply defined
warning: fx3000-in-1: multiply defined
warning: fx3000-in-1: multiply defined
warning: fx3000-in-0: multiply defined
warning: fx3000-in-0: multiply defined
pd-float: rounding to 2048 points
pd-float: rounding to 2048 points
warning: fx3000-in-2: multiply defined
warning: fx3000-in-2: multiply defined
warning: fx3000-in-1: multiply defined
warning: fx3000-in-1: multiply defined
warning: fx3000-in-0: multiply defined
warning: fx3000-in-0: multiply defined
pd-float: rounding to 2048 points
pd-float: rounding to 2048 points
warning: fx3000-in-2: multiply defined
warning: fx3000-in-2: multiply defined
warning: fx3000-in-1: multiply defined
warning: fx3000-in-1: multiply defined
warning: fx3000-in-0: multiply defined
warning: fx3000-in-0: multiply defined
pd-float: rounding to 2048 points

So I'm getting this now. I read somewhere on the forum that one's supposed to "declare the library", is that something I should do?

output~
... couldn't create
drip
... couldn't create
demultiplex 0 1
... couldn't create
demultiplex 0 1
... couldn't create
lister
... couldn't create
list2symbol
... couldn't create
demultiplex 0 1
... couldn't create
symbol2list
... couldn't create
list-extend
... couldn't create
comport - PD external for unix/windows
LGPL 1998-2015, Winfried Ritsch and others (see LICENSE.txt)
Institute for Electronic Music - Graz
[comport] set_baudrate: Setting baud rate to 6.95161e-310 with baudbits 0x2580
[comport] opened serial line device 1 (/dev/tty.URT0)

warning: [repack] abstraction not fully compatible with zexy's repack

Hello!
I'm quite new using PD. A couple of years ago my friend helped me create capacitive sensors using both PD and Arduino. However, since my old computer got stolen, I'm having a hard time knowing what libraries and setups I need on PD. This is a list of all the errors I get. Please.. help 😅

output~
... couldn't create
drip
... couldn't create
demultiplex 0 1
... couldn't create
demultiplex 0 1
... couldn't create
lister
... couldn't create
list2symbol
... couldn't create
demultiplex 0 1
... couldn't create
symbol2list
... couldn't create
list-extend
... couldn't create
comport 1 9600
... couldn't create
warning: [repack] abstraction not fully compatible with zexy's repack
consistency check failed: hammerembed_gc (1 garbage bindings)
drip
... couldn't create
demultiplex 0 1
... couldn't create
demultiplex 0 1
... couldn't create
lister
... couldn't create
list2symbol
... couldn't create
demultiplex 0 1
... couldn't create
symbol2list
... couldn't create

I wanted to build PD on Windows 10 to get ASIO support. I failed when I used the "Source" files from the PD website. I succeeded when I used source that I cloned from Github. I followed the same instructions from the wiki both when I failed and when I succeeded. (They are the same as in the manual, just a little more concise.)

I am sharing below my terminal output from the failed build attempts from the downloaded source code (the tar.gz file). Some of these messages suggest that there might be errors in the makefiles. I don't know anything about makefiles, so I can't really interpret the errors. But I did want to pass them along, in case a developer might find them useful. Here you go:

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ ./autogen.sh
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'm4/config'.
libtoolize: linking file 'm4/config/config.guess'
libtoolize: linking file 'm4/config/config.sub'
libtoolize: linking file 'm4/config/install-sh'
libtoolize: linking file 'm4/config/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4/generated'.
libtoolize: linking file 'm4/generated/libtool.m4'
libtoolize: linking file 'm4/generated/ltoptions.m4'
libtoolize: linking file 'm4/generated/ltsugar.m4'
libtoolize: linking file 'm4/generated/ltversion.m4'
libtoolize: linking file 'm4/generated/lt~obsolete.m4'
configure.ac:166: warning: The macro `AC_LIBTOOL_DLOPEN' is obsolete.
configure.ac:166: You should run autoupdate.
aclocal.m4:8488: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:166: the top level
configure.ac:166: warning: AC_LIBTOOL_DLOPEN: Remove this warning and the call to _LT_SET_OPTION when you
configure.ac:166: put the 'dlopen' option into LT_INIT's first parameter.
../autoconf-2.71/lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:8488: AC_LIBTOOL_DLOPEN is expanded from...
configure.ac:166: the top level
configure.ac:167: warning: The macro `AC_LIBTOOL_WIN32_DLL' is obsolete.
configure.ac:167: You should run autoupdate.
aclocal.m4:8523: AC_LIBTOOL_WIN32_DLL is expanded from...
configure.ac:167: the top level
configure.ac:167: warning: AC_LIBTOOL_WIN32_DLL: Remove this warning and the call to _LT_SET_OPTION when you
configure.ac:167: put the 'win32-dll' option into LT_INIT's first parameter.
../autoconf-2.71/lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:8523: AC_LIBTOOL_WIN32_DLL is expanded from...
configure.ac:167: the top level
configure.ac:168: warning: The macro `AC_PROG_LIBTOOL' is obsolete.
configure.ac:168: You should run autoupdate.
aclocal.m4:121: AC_PROG_LIBTOOL is expanded from...
configure.ac:168: the top level
configure.ac:182: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:182: You should run autoupdate.
../autoconf-2.71/lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:182: the top level
configure.ac:213: warning: The macro `AC_TYPE_SIGNAL' is obsolete.
configure.ac:213: You should run autoupdate.
../autoconf-2.71/lib/autoconf/types.m4:776: AC_TYPE_SIGNAL is expanded from...
configure.ac:213: the top level
configure.ac:235: warning: The macro `AC_CHECK_LIBM' is obsolete.
configure.ac:235: You should run autoupdate.
aclocal.m4:3879: AC_CHECK_LIBM is expanded from...
configure.ac:235: the top level
configure.ac:276: warning: The macro `AC_TRY_LINK' is obsolete.
configure.ac:276: You should run autoupdate.
../autoconf-2.71/lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
m4/universal.m4:14: PD_CHECK_UNIVERSAL is expanded from...
configure.ac:276: the top level
configure.ac:168: installing 'm4/config/compile'
configure.ac:9: installing 'm4/config/missing'
asio/Makefile.am: installing 'm4/config/depcomp'

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ autoupdate
configure.ac:182: warning: The preprocessor macro `STDC_HEADERS' is obsolete.
  Except in unusual embedded environments, you can safely include all
  ISO C90 headers unconditionally.
configure.ac:213: warning: your code may safely assume C89 semantics that RETSIGTYPE is void.
Remove this warning and the `AC_CACHE_CHECK' when you adjust the code.

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ ^C

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ ./configure
configure: loading site script /etc/config.site
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking build system type... x86_64-w64-mingw32
checking host system type... x86_64-w64-mingw32
configure: iPhone SDK only available for arm-apple-darwin hosts, skipping tests
configure: Android SDK only available for arm-linux hosts, skipping tests
checking for as... as
checking for dlltool... dlltool
checking for objdump... objdump
checking how to print strings... printf
checking whether make supports the include directive... yes (GNU style)
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... .exe
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe
checking if the linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /mingw64/bin/nm -B
checking the name lister (/mingw64/bin/nm -B) interface... BSD nm
checking whether ln -s works... no, using cp -pR
checking the maximum length of command line arguments... 8192
checking how to convert x86_64-w64-mingw32 file names to x86_64-w64-mingw32 format... func_convert_file_msys_to_w32
checking how to convert x86_64-w64-mingw32 file names to toolchain format... func_convert_file_msys_to_w32
checking for C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe option to reload object files... -r
checking for objdump... (cached) objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for dlltool... (cached) dlltool
checking how to associate runtime and link libraries... func_cygming_dll_for_implib
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /mingw64/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for vfork.h... no
checking for dlfcn.h... no
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking for g++... g++
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... none needed
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe
checking if the linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) is GNU ld... yes
checking whether the g++ linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) supports shared libraries... yes
checking for g++ option to produce PIC... -DDLL_EXPORT -DPIC
checking if g++ PIC flag -DDLL_EXPORT -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (C:/msys64/mingw64/x86_64-w64-mingw32/bin/ld.exe) supports shared libraries... yes
checking dynamic linker characteristics... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether make sets $(MAKE)... (cached) yes
checking whether ln -s works... no, using cp -pR
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for windres... windres
checking for egrep... (cached) /usr/bin/grep -E
checking for fcntl.h... yes
checking for limits.h... yes
checking for malloc.h... yes
checking for netdb.h... no
checking for netinet/in.h... no
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for sys/ioctl.h... no
checking for sys/param.h... yes
checking for sys/socket.h... no
checking for sys/soundcard.h... no
checking for sys/time.h... yes
checking for sys/timeb.h... yes
checking for unistd.h... (cached) yes
checking for int16_t... yes
checking for int32_t... yes
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking for error_at_line... no
checking for fork... no
checking for vfork... no
checking for GNU libc compatible malloc... (cached) yes
checking for GNU libc compatible realloc... (cached) yes
checking return type of signal handlers... void
checking for dup2... yes
checking for floor... yes
checking for getcwd... yes
checking for gethostbyname... no
checking for gettimeofday... yes
checking for memmove... yes
checking for memset... yes
checking for pow... yes
checking for regcomp... no
checking for select... no
checking for socket... no
checking for sqrt... yes
checking for strchr... yes
checking for strerror... yes
checking for strrchr... yes
checking for strstr... yes
checking for strtol... yes
checking for dlopen in -ldl... no
checking for cos in -lm... yes
checking for CoreAudio/CoreAudio.h... no
checking for pthread_create in -lpthread... yes
checking for msgfmt... yes
checking for sys/soundcard.h... (cached) no
checking for snd_pcm_info in -lasound... no
configure: Using included PortAudio
configure: Using included PortMidi
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating asio/Makefile
config.status: creating doc/Makefile
config.status: creating font/Makefile
config.status: creating mac/Makefile
config.status: creating man/Makefile
config.status: creating msw/Makefile
config.status: creating portaudio/Makefile
config.status: creating portmidi/Makefile
config.status: creating tcl/Makefile
config.status: creating tcl/pd-gui
config.status: creating po/Makefile
config.status: creating src/Makefile
config.status: creating extra/Makefile
config.status: creating extra/bob~/GNUmakefile
config.status: creating extra/bonk~/GNUmakefile
config.status: creating extra/choice/GNUmakefile
config.status: creating extra/fiddle~/GNUmakefile
config.status: creating extra/loop~/GNUmakefile
config.status: creating extra/lrshift~/GNUmakefile
config.status: creating extra/pd~/GNUmakefile
config.status: creating extra/pique/GNUmakefile
config.status: creating extra/sigmund~/GNUmakefile
config.status: creating extra/stdout/GNUmakefile
config.status: creating pd.pc
config.status: executing depfiles commands
config.status: executing libtool commands
configure:

    pd 0.51.4 is now configured

    Platform:             MinGW
    Debug build:          no
    Universal build:      no
    Localizations:        yes
    Source directory:     .
    Installation prefix:  /mingw64

    Compiler:             gcc
    CPPFLAGS:
    CFLAGS:               -g -O2 -ffast-math -funroll-loops -fomit-frame-pointer -O3
    LDFLAGS:
    INCLUDES:
    LIBS:                 -lpthread

    External extension:   dll
    External CFLAGS:      -mms-bitfields
    External LDFLAGS:     -s -Wl,--enable-auto-import -no-undefined -lpd

    fftw:                 no
    wish(tcl/tk):         wish85.exe
    audio APIs:           PortAudio ASIO MMIO
    midi APIs:            PortMidi


bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ make
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/c/Useras/bhage/Downloads/pd-0.51-4/m4/config/missing' aclocal-1.16 -I m4/generated -I m4
configure.ac:170: error: AC_REQUIRE(): cannot be used outside of an AC_DEFUN'd macro
configure.ac:170: the top level
autom4te: error: /usr/bin/m4 failed with exit status: 1
aclocal-1.16: error: autom4te failed with exit status: 1
make: *** [Makefile:451: aclocal.m4] Error 1

bhage@LAPTOP-F1TU0LRH MINGW64 /c/Users/bhage/Downloads/pd-0.51-4
$ make app
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh '/c/Users/bhage/Downloads/pd-0.51-4/m4/config/missing' aclocal-1.16 -I m4/generated -I m4
configure.ac:170: error: AC_REQUIRE(): cannot be used outside of an AC_DEFUN'd macro
configure.ac:170: the top level
autom4te: error: /usr/bin/m4 failed with exit status: 1
aclocal-1.16: error: autom4te failed with exit status: 1
make: *** [Makefile:451: aclocal.m4] Error 1

Hello there, this seemed an interesting patch, so i unzipped it on a folder and tried to open it but got an unusable display and a string of errors on console, something like this (its not all of it);

list fromsymbol
... couldn't create
list tosymbol: unknown function
list tosymbol
... couldn't create
pdcontrol
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
clone 1 0 3 0 (canvas->outlet) connection failed
clone 1 1 8 0 (canvas->list split) connection failed
else/receiver
... couldn't create
else/receiver
... couldn't create
text search $1
... couldn't create
text set $1
... couldn't create
text search $1
... couldn't create
text get $1
... couldn't create
text size $1
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
text delete $1
... couldn't create
text_replace.pd 31 0 6 0 (canvas->select) connection failed
text_replace.pd 31 1 34 0 (canvas->trigger) connection failed
text define $0-guithru
... couldn't create
text size
... couldn't create
text get
... couldn't create
else/loadbanger -init
... couldn't create
else/receiver
... couldn't create
else/dollsym 1
... couldn't create
else/dollsym 2
... couldn't create
text define -k $0-controls
... couldn't create
array: no method for 'set'
else/args
... couldn't create
else/break -
... couldn't create
list fromsymbol: unknown function
list fromsymbol
... couldn't create
list tosymbol: unknown function
list tosymbol
... couldn't create
pdcontrol
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
clone 1 0 3 0 (canvas->outlet) connection failed
clone 1 1 8 0 (canvas->list split) connection failed
else/receiver
... couldn't create
else/receiver
... couldn't create
text search $1
... couldn't create
text set $1
... couldn't create
text search $1
... couldn't create
text get $1
... couldn't create
text size $1
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
text delete $1
... couldn't create
text_replace.pd 31 0 6 0 (canvas->select) connection failed
text_replace.pd 31 1 34 0 (canvas->trigger) connection failed
text define $0-guithru
... couldn't create
text size
... couldn't create
text get
... couldn't create
else/loadbanger -init
... couldn't create
else/receiver
... couldn't create
else/dollsym 1
... couldn't create
else/dollsym 2
... couldn't create
text define -k $0-controls
... couldn't create
array: no method for 'set'
else/click
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
q 8 0 11 0 (canvas->outlet) connection failed
q 8 1 5 0 (canvas->+~) connection failed
q 8 2 12 1 (canvas->canvas) connection failed
else/args
... couldn't create
else/break -
... couldn't create
list fromsymbol: unknown function
list fromsymbol
... couldn't create
list tosymbol: unknown function
list tosymbol
... couldn't create
pdcontrol
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
clone 1 0 3 0 (canvas->outlet) connection failed
clone 1 1 8 0 (canvas->list split) connection failed
else/receiver
... couldn't create
else/receiver
... couldn't create
text search $1
... couldn't create
text set $1
... couldn't create
text search $1
... couldn't create
text get $1
... couldn't create
text size $1
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
text delete $1
... couldn't create
text_replace.pd 31 0 6 0 (canvas->select) connection failed
text_replace.pd 31 1 34 0 (canvas->trigger) connection failed
text define $0-guithru
... couldn't create
text size
... couldn't create
text get
... couldn't create
else/loadbanger -init
... couldn't create
else/receiver
... couldn't create
else/dollsym 1
... couldn't create
else/dollsym 2
... couldn't create
text define -k $0-controls
... couldn't create
array: no method for 'set'
else/click
... couldn't create
text define -k $0-controls
... couldn't create
array: no method for 'set'
else/args
... couldn't create
text define -k $0-controls
... couldn't create
array: no method for 'set'
else/args
... couldn't create
else/loadbanger -init
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
mode 14 0 3 0 (canvas->clip) connection failed
mode 14 1 4 0 (canvas->wrap) connection failed
mode 14 2 6 0 (canvas->abs) connection failed
mode 14 3 15 0 (canvas->moses) connection failed
else/args
... couldn't create
else/break -
... couldn't create
list fromsymbol: unknown function
list fromsymbol
... couldn't create
list tosymbol: unknown function
list tosymbol
... couldn't create
pdcontrol
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
clone 1 0 3 0 (canvas->outlet) connection failed
clone 1 1 8 0 (canvas->list split) connection failed
else/receiver
... couldn't create
else/receiver
... couldn't create
text search $1
... couldn't create
text set $1
... couldn't create
text search $1
... couldn't create
text get $1
... couldn't create
text size $1
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
text delete $1
... couldn't create
text_replace.pd 31 0 6 0 (canvas->select) connection failed
text_replace.pd 31 1 34 0 (canvas->trigger) connection failed
text define $0-guithru
... couldn't create
text size
... couldn't create
text get
... couldn't create
else/loadbanger -init
... couldn't create
else/receiver
... couldn't create
else/dollsym 1
... couldn't create
else/dollsym 2
... couldn't create
text define -k $0-controls
... couldn't create
array: no method for 'set'
else/click
... couldn't create
else/break -
... couldn't create
list fromsymbol: unknown function
list fromsymbol
... couldn't create
list tosymbol: unknown function
list tosymbol
... couldn't create
pdcontrol
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
clone 1 0 3 0 (canvas->outlet) connection failed
clone 1 1 8 0 (canvas->list split) connection failed
else/receiver
... couldn't create
else/receiver
... couldn't create
text search $1
... couldn't create
text set $1
... couldn't create
text search $1
... couldn't create
text get $1
... couldn't create
text size $1
... couldn't create
else/args
... couldn't create
else/loadbanger -init
... couldn't create
text delete $1
... couldn't create
text_replace.pd 31 0 6 0 (canvas->select) connection failed
text_replace.pd 31 1 34 0 (canvas->trigger) connection failed
text define $0-guithru
... couldn't create
text size
... couldn't create
text get
... couldn't create
else/loadbanger -init
... couldn't create
else/receiver
... couldn't create
else/dollsym 1
... couldn't create
else/dollsym 2
... couldn't create
count.pd 15 0 8 0 (canvas->+) connection failed
count.pd 15 1 14 0 (canvas->-) connection failed
else/args
... couldn't create
else/loadbanger -init
... couldn't create
display 60 0 29 0 (canvas->message) connection failed
display 60 1 31 0 (canvas->select) connection failed
display 60 2 32 0 (canvas->message) connection failed
display 60 3 31 0 (canvas->select) connection failed

Any ideas ? cheers

@Booberg Can you list the dependencies?

... couldn't create
tanh~
... couldn't create
z~
... couldn't create
range~
... couldn't create
dA
... couldn't create
number~
... couldn't create
array: no method for 'saved'
number~
... couldn't create
array: no method for 'saved'
brickwall~ 18500
... couldn't create
brown~
... couldn't create
bandstop~ 1050 0.3
... couldn't create
lag~ 384 768
... couldn't create
>~ 0.5
... couldn't create
slide~ 10 -0.5
... couldn't create```