• Gabriel Lecup

    Hi Coalman. Here's the latest version. It hasn't been tested on diferent platforms, and might be a bit harder to use as the first version was built for a friend and this one I use alone. I'd love feedback! Cheers snail_v2.0.zip

    posted in patch~ read more
  • Gabriel Lecup

    Yes, that's right.
    I have a new version I can post further down if you're interested, don't hesitate if you have questions.
    Best,

    posted in patch~ read more
  • Gabriel Lecup

    Hi there, thanks for the interest.
    It seems you’re missing libraries “else” and “hcs”.
    You’re also probably not using the latest version of Pd 0.51 as the object [pdcontrol] doesn’t load.
    Hope this helps, keep me posted and have a great day ;)

    posted in patch~ read more
  • Gabriel Lecup

    Hi there! I know it’s been 5 years, but I stumbled upon this thread and thought I’d share what I usually use as an automatic feedback killer ;)

    I guess the advantage is that it remains in the signal domain. This example uses the envelope of one signal to inversely modulate another, but using send~ / receive~ it can easily modulate itself. Hope this makes sense ...pumpin.pd

    posted in technical issues read more
  • Gabriel Lecup

    And another idea: if you're using [>=] or similar to detect threshold, make sure it's followed by a [change]?

    posted in technical issues read more
  • Gabriel Lecup

    Yes, and maybe try the following:

    • As Whale-av says print the sender and receiver
    • Test with a cord instead of s/r
    • Maybe you're using a "sel 1" object on the sender and not the receiver (to make a bang from a toggle)?
    • Post the patch here, this is strange indeed

    posted in technical issues read more
  • Gabriel Lecup

    Hi there,

    Ok so everything is working? You don't have the can't create error anymore?
    Let me know if you do we can figure it out.
    I'd love feedback too!

    Best,

    posted in technical issues read more
  • Gabriel Lecup

    snail_v1.0.zip

    Here's a temp version.

    posted in patch~ read more
  • Gabriel Lecup

    Hello forum,

    Here’s a video of a patch I built for a friend then started using and tweaking to my needs:

    The idea was to have an intuitive general purpose patch for non Pd users, for live input processing and mixing (with a thing for drones and textures).

    I’d love feedback! I have a lot on my plate for a couple of months but I hope to clean up, document and share further down.

    posted in patch~ read more
  • Gabriel Lecup

    Here's the same "freeze" patch (later version, cool "auto" mode) integrated with the larger patch "snail" I made for a friend of mine:

    As I said I'll be on standby for a while, but any feedback is most welcome. I might clean up , document and post once I'm back on my feet.

    posted in technical issues read more
  • Gabriel Lecup

    Hi there,

    Thanks for the interest!

    Unfortunately I'm now caught up in some complex work & home change and I won't find time in another couple of months, really sorry.

    I will get back to this thread when I can though, and regarding the patch all the logic is inside de [pd core] subpatch.

    Sorry I can't be of much help.
    Best,

    posted in technical issues read more
  • Gabriel Lecup

    As David says, I usually preload all samples to buffers in a "samplebank" type of object. In your case as they're single notes it should do the trick.
    Then maybe use clone with X table readers (your number of voices) and the poly object to assign them?

    posted in technical issues read more
  • Gabriel Lecup

    Here it is!

    freeze_Oct_2020.zip

    It’s based on the [freeze3] patch mentioned in the first post.
    It uses some other abstractions of mine so I just bundled the whole thing, check the readme.
    I can make a self-contained vanilla patch if this is confusing.

    This is my first go at spectral processing - feedback and advice much welcome!
    Enjoy!

    posted in technical issues read more
  • Gabriel Lecup

    And 5 years later ...

    I can share if anybody still comes here.

    posted in technical issues read more
  • Gabriel Lecup

    Hi Forum,

    Just thought I’d share a video of this [freeze~] patch I made based on what I’ve found in this thread: thanks everyone!

    Still a lot to learn, but fits my needs …

    posted in technical issues read more
  • Gabriel Lecup

    Great, thank you, wish I'd bumped into this sooner!

    posted in technical issues read more
  • Gabriel Lecup

    This is great, thanks!
    What do you need [fudiformat] for? It seems to work without if inputs are lists.

    posted in technical issues read more
  • Gabriel Lecup

    Thank you both so much, I'll check all of those.
    I had no idea about [pd~], it would have saved me a lot of issues.
    Any ideas about the slow loading? Is it just about the number of objects to be loaded?

    posted in technical issues read more
  • Gabriel Lecup

    Hello all!

    As the title says, I’m looking for help / feedback / tips on how to optimise my patch.

    I understand it’s already quite complex, but I’d need to push it another step in order to get where I need: a swiss army patch for live sonic improvisation / exploration, combining bits I’ve built in the past for myself or others, or found on this forum.

    I’ve made sure (at least I believe) that guis aren’t updated unless they’re showing, dsp is switched off whenever is possible, I’ve tried to limit buffer space, etc. However it’s still very slow at loading and closing, and begins to crack when all elements are active.

    I’m with Ubuntu on an old i5 so I understand there are limits, I just didn’t think they’d be met so fast.

    I’d also love to know if someone knows how to remove menu bars on all windows except the Pd window?

    The patch requires pd 0.50 and the ELSE library available on Dekken.
    Then just make sure you point to the “pudu” folder in the paths and startup.

    Using the patch should be quite straightforward, though still undocumented WIP. If I get past current limitations I’ll make it solid: it might be of some help to noobs as it wraps bits from my favorite projects such as else, audiolab, rj-lib, diy2, mmb-master, etc.

    Any help appreciated! Thank you forum, as always.
    pudu.zip

    posted in technical issues read more
Internal error.

Oops! Looks like something went wrong!