Chris McCormick has done a wonderfull android app, it enable you to run your pd patches on your android smartphone and play with them anywhere, provided that you keep it vanilla.

1- Go there : http://droidparty.net/
and download the apk on your PC

2- Download the attached zip, (it's a tested and working patch.) unzip it on you computer.

3- Search File Expert on the android market and install it (https://market.android.com/details?idxcxin.filexpert)

4- Once file expert is installed, fire it up, and click on Share (in the bottom line) -> choose "enable web sharing" (this will share your sdcard localy). A message appears and gives you info such as an adress, a username and a password (remember it, or keep it displayed onto your phone)

5- On your pc, launch your preferred browser enter the adress, it will prompt you for usename and password.

6- Double click on the big icon, and you have access to your SDcard.

7- Create a folder of you choice (right click -> New Dir), enter it and upload the apk (right click ->upload). Once the upload finished, just click the uploaded file it will install on its own.

8- Go back to the root folder of the SDcard, create a new folder of you choice to put your patches (say "Pure-Data"), enter it. Create a new folder called XY-Pad, and upload all the files from the zip in this folder. "droidparty_main.pd" is the main patch you can have a look at it on your PC first.

9- Close File Expert on your phone by pressing back several times, and launch PdDroidParty it will find your patches on its own.

10- Have Fun !

note : I choose to use an app to share you sd card wia wifi (because it's faster than pluging and mounting your phone each time you want to test something), but you can of course use USB cable to do all the transfers beetween phone and computer. But you'll need a file browser anyway to install the transfered apk

edit : you need to authorize non-market apps to be installed. Just go in Parameters -> Application and check the first box (something like "authorize non-market application")

http://www.pdpatchrepo.info/hurleur/XY-pad-droid.zip

yes i will test it

Hey there - the site seems to be down. Is there an alternative download location for PDDroidParty? Thanks!

The new location for the project page is

http://droidparty.net/

Awesome. Thanks!

Nice page!

I'm at the point where I have my patch working the way I want via droidparty, but I'm stuck creating a standalone app. All due to me being a total noob, no doubt ;^) I've installed Bazaar and have managed the first step (clone the source code). I'm stuck at the second step "Convert the app name to whatever you like". How exactly do I do this `./convert-app-name mysynth "My Synthesizer"`. Is it a Bazaar command? Bazaar doesn't seem to recognize it as such. I'm assuming `./pack-patch` will work along similar lines. Any help would be much appreciated!

those two are scripts within the PdDroidparty folder.

so once you cloned it you enter the folder and type those commands.

let us know how it went.

Hey Berenger, thanks for the help, but I'm still stuck. Where do I type in the commands? I'm on Win7 64 here and when I create a command prompt, enter the folder and type the command, I get "'convert-app-name' is not a recognized as an internal or external command, operable program or batch file." In Bazaar I've tried the following/; opened the MySynthesizer location, and typed in "convert-app-name" in the "command" box under Bazaar/All Commands, to get "bzr: ERROR: unknown command "convert-app-name".

OK, so I've established that they're Linux scripts. I've not been able to run them successfully with Cygwin, so I guess I'm looking at installing Ubuntu on a spare PC - is there an easier way that I'm missing?

Me again. So maybe those scripts run on Mac OS? Either way, I tried again with Cygwin, but it doesn't understand the rpl command. I've also tried running Ubuntu off a CD-Rom, but I couldn't run the scripts successfully that way either.

I thought I might skip the scripts and try to make the required changes in Eclipse, but am stuck importing the source. I downloaded a new clone of the source and ran "android update project --name MySynthesizer --target 2 --path e:/MySynthesizer" on it. In Eclipse I went File/New/Android Project, selected "Create project from existing source" and browsed to the MySynthesizer location. This created a new eclipse project under the title PatchSelector. Everything seems to have been imported, but under the Problems tab I get 80 errors and 83 warnings - obviously very little is the way it should be.

Apologies to those of you facepalming your way through my messages, but like I said, I'm a complete noob. To be honest, I'm running out of ideas here. And the instructions made it sound so easy ;^)

Hi

those scripts do run on linux they may run on OS too. RPL is something you need to install first (from synaptic or >sudo apt-get rpl)

the scripts make reference to ./PdCore and (./btmidi, not sure about this one), so you should have cloned both those folder from the same source.

When importing the project in eclipse you should, have first imported btmidi and PdCore. Then tight click on the project -> properties, click on the android pannel (left hand side). Remove PdCore as a library and add it again. It should take care of some of the errors .

Thanks again, Berenger - I'll let you know how I get along.

Just a report back. I've finally succeeded in getting my app to function stand-alone and now have it available in the Android Market. The free version is available on the Android Market here: What Comes Around Free. Here are the steps I followed to get it working for me.

After installing Ubuntu on a spare computer (along with the rpl command as detailed before), I managed to get the scripts to run, but still couldn't get the "ant install" to function as expected.

I went back to the Windows 7 PC and tried the Eclipse route again. This time I laid the proper groundwork and resolved a lot of errors by importing everything as per Peter Brinkmann's instructions on the Pd Everywhere forum.

"[...] make sure that you’ve cloned pd-for-android and its dependencies like this:
git clone git://gitorious.org/pdlib/pd-for-android.git
cd pd-for-android
git submodule init
git submodule update
Now you need to import btmidi/BluetoothMidi and pd-for-android/PdCore/jni/libpd into Eclipse (make sure to use
File -> Import… -> General -> Existing project…). Now you can import PdCore. If you see error messages, those are probably due to bugs in Eclipse, and you should be able to sort them out by refreshing and cleaning everything once or twice. (This is the annoying part…)"

I had to fix additional Eclipse errors on my system by setting the Java Compiler Compliance Level to 1.6 for each of the imported projects.

Next I tried to import the project I created by running the scripts in Linux into Eclipse on the Windows machine, but it seems as if one of the scripts deletes the Eclipse project. I went back and imported the originally downloaded PdDroidParty project from the MySynthesizer folder. The project imports under the title PatchSelector. Again, I set Java Compiler Compliance Level to 1.6 (right-click PatchSelector in the Package Explorer - it's under Java Compiler). I also had complaints until I set the Project Build Target to Android 2.2 (right-click PatchSelector in the Package Explorer - it's under Android).

This left me with 9 final errors related to the SVGParser. I resolved this by right-clicking PatchSelector in the Package Explorer and going to Build Path/Configure Build Path/Add JARs and selecting svg-android.jar under PatchSelector/libs in my workspace directory. I remember having to restart Eclipse a couple of times to get rid of spurious errors (!)

Next I renamed PatchSelector to my own title (in my case WhatComesAround) by right-clicking in the Package Explorer and choosing Refactor/Rename.

I copied across files that were created when I ran the Linux scrips, notably:
* patch.zip (res/raw folder) - this zip contains a folder called "patch", itself containing your pd patch as a droidparty_main.pd file, as well as a file titled VERSION-169 (in my case) - it doesn't seem to have an extension and simply contains the text 169
* I placed my splash.svg in the same folder (res/raw)
* my icon.png in the folder res/drawable
* the same icon.png in bin/res/drawable
* in the res/values folder, an patch.xml and strings.xml

Next I set about renaming files and occurrences within files with my own names - one of the Linux scripts does this, but I did it by hand on the Windows machine using Windows Grep (http://www.wingrep.com/) to search for all instances, and changing names inside Eclipse. I replaced all occurrences of PdDroidParty with my own name (WhatComesAround), a single instance of PdDroid Party with What Comes Around, as well as any mention of MySynthesizer (again with WhatComesAround).

After testing in the emulator I exported signed .apk's from Eclipse - one for a free and one for a paid version.

Nice work, nice looking app.

thanks for the feedback I'll check it in more details and try to reproduce this

wow thats great that you got a good gui and a icon
your examples are hard to do?

cheers for the info moshang, app working fine on my desire S.

are droidparty or libpd multitouch capable on android?

for droidparty no mutli-touch support yet, but it will be comming

as for libpd the mutli-touch will be dealt by the client code, since libpd is a dsp library.

If you use RjDj it's mutli-touch ready

[r #touch]
|
[route 1 2] <- routes fingers
| |
| [route down up xy] <- get what you want from each finger
[route down up xy]

Cheers

so if I compile an apk it will be multitouch?

Well it depends

-if you use droidparty no not yet...

• if you use libpd as a dsp library in eclipse or another IDE, you need to have the client code deal with that.
  I guess you could import the code from Sceneplayer (equivalent to rjdj for android), make it play only one patch and compile it to an apk but you won't have the svg support (you'll need to build your interface from images)
  => you'll need to digg in code to use libpd (a little of knowledge in java would help a lot).
  If you are familiar with processing, it is possible to use libpd and processing within eclipse and make the communicate. a good tuto here : https://docs.google.com/document/pub?id=1I5GitcgVZsJ_48EXASHbXwdScNwSWixMuzOPdh-swKY

thanks for the info, i'll wait for droidpartys support!

great work droidparty crew, having loads of fun with this!