Hello All,

I am embarking on building a polyphonic sampler with maybe four or five voices, that would be triggered via drum pads, and would have mute group settings, like the old-school akai samplers.

I want to keep it easy on the processor, and so I want to just have maybe four voices, but play from a least 8 sound files, even better would be 16 or so.

In an old thread HD mentions the following:

@HD said:

You don't have to use a vline/tabread4 for every single sample. You just need to determine the max number of voices that you want to play at any point in time. For example, if you only want to play a max of 4 samples at any point in time, then you only need 4 sample playback subpatches. You can set it up so you load more than 4 samples into your patch, then just use a "set" message to change the buffer you're reading from. I can provide a simple example if you want.

This is exactly what I want to do, and I will set out to do it, but if anyone has an example of what HD was talking about back in 2009, I would love to see it. I will post what i get when I get it up and running.

All the best,
Leigh

Hello All,

Has anyone wrestled with this? I always have problems when I try to build from source, but since there is no pd-extended in the natty repos, I thought I'd give it a shot.

So far I've installed the dependencies:

sudo apt-get build-dep puredata gem pd-pdp

and more dependencies:

sudo apt-get install libmp3lame0 libmp3lame-dev ladspa-sdk dssi-dev libimlib2-dev libtheora-dev

and lastly:

sudo apt-get install libquicktime1 libquicktime-dev

Now everything goes swimmingly up to this point. Then I downloaded the pd-extended source package, and following the advice from a post -- http://puredata.hurleur.com/sujet-5337-extended-debian -- by some folks building for a 64-bit processor, I jump to the externals/pidip directory to build it first:

cd externals/pidip/

First, just to be on the safe side, I read the INSTALL text, and it concurs with the previously mentioned post. But, when i try:

./configure --with-pd=../../pd --with-pdp=../pdp

I get the following error:

bash: ./configure: No such file or directory

ls seems to disagree:

ls | grep configure gives me:
configure.ac

I tried making it executable, still no luck. build-essentials and make are installed on my computer.

Any ideas?

All the best, Leigh

Hello,

Is DC blocking something that can be implemented for an incoming audio signal within PD, or is it a hardware issue? If it is something that can be done in PD, could someone point me in the direction as far as what objects I would use?

I have a looper I've been working on that uses delaylines, and i would like to minimize the build up of noise as I overlap recorded tracks.

All the best, Leigh

Hello all,

I have been trying to put together a patch for looping, but I am having trouble getting the delay line to play right. I tried to follow the outline in this post:
http://puredata.hurleur.com/viewtopic.php?pid=5168#p5168

So far I've had no luck. I was wondering if someone would be willing to look at my patch attempt, and set me in the right direction. I'll attach the module I am trying to write. I am going for a multi-track looper with a dynamic array length, and where all subsequent tracks "stick" to the first loop.

All the best,
Leigh

http://www.pdpatchrepo.info/hurleur/udon.pd

Oh wow, I had the execution order of the unpack backwards. Thanks, you really helped me out with this info. When I get it working I will post it.
All the best,
Leigh

I should mention, there is definitely something going on with the envelope. I am printing out the values being sent to the adsr object, and I see that the peak amplitude is always being sent as zero--which is confusing to me. I am using a trigger to send the various parameters before I send the trigger.

Here it is, as stripped down as I could make it, and annotated as well.

Le voila

Best, Leigh

OK, I will isolate it and re-upload a smaller patch. I believe poly is doing what it should be doing, so I can just make a single voice version and go from there.

Hello All,

I have been struggling a bit getting my sampler to work. I think the two sticking points are the adsr envelope and using tabread4~ object correctly. I have it set up as a 5-voice polyphonic sampler that uses 12 pads to trigger 12 different arrays.

But it's not really working. I think it's successfully handling passing the array name to the tabread4~ within the sampler voice objects, but somehow it's not all lining up. I went with the susloop~ object after another version using phasor~ that wasn't working with the envelope.

If anyone is willing to look at this and give me a pointer or two, I would be very grateful. It should be self-contained--the sounds are in a subfolder, and then gui is pretty self explanatory. If you don't have a midi controller, there are a couple of messages that send midi notes for testing purposes.

Here is the download.

All the best,
Leigh

AH OK, thanks. I saw that they have the ability to receive "set" messages, but wasn't sure if it would work to set the array on the fly while triggering samples. This is good to know. Thanks again.