Dear Forum,

I have many years worth of work on acoustic signal processing in the form of matlab codes and unix shell scripts. I would like to build an interface so that I can get numerical output from a MIDI trigger and feed those numbers into these scripts. Those scripts are set up to write .wav files which can be easily re-loaded into pd.

It seems that pd offers a perfect way to get a numerical value from a MIDI interface, but after a few hours scanning tutorials and message boards I don't see an obvious way to feed this number into a shell script. (Is there not an object that can execute a command at the command line interface when it recieves a bang? That is all I need!)

In effect I would like to use my pre-existing scripts as externals, but I don't want to have to migrate all my codes into C. (I know even less about coding in C than coding in pd).

My apologies if this query is trivial or non-sensical. I am very new to the world of Pure Data and I'd be appreciative if someone would just let me know if this idea is feasible or not.

Many thanks!
James

[netsend] and [netreceive] are the tcp socket objects in pd, btw.

Many thanks for the prompt reply!

[Shell] seems perfect for my use but when I try to create I receive the following message:

shell
... couldn't create

Is [shell] a standard feature? Perhaps I need to re-install PD?

Btw, [netsend] / [netreceive] are working well and I can certainly use those for my project if I can't get the [shell] object to work. Thanks for the info!

I think [shell] is in the ggee library. It's preloaded in pd-extended.

Yes, you are correct on both counts. It is in ggee and now that I have installed Pd-extended (I was using an old version previously) the [shell] object works perfectly.

I'm well on my way now. Many thanks!

Hello!

Maybe you can answer this.

I understand that sending something into "shell" object is like writing it on a terminal; but is it possible to obtain back into PD the answers that a terminal gives to commands?

I.e. if under MAC I open terminal and use "say -v ? | more" I get all the available TextToSpeech voices in the system. I'd love to feed these back to PD to populate a sort of menu, to basically change voices on the go, without having to know in advance which ones are available.

This could be useful in many other ways, I assume.

Thank you!

The left output of shell returns the terminal response to whatever commands were entered. I have found this works quite well if the terminal command only returns one line i.e.

[date +%Y.%.m.%d (
|
[shell]
|
[symbol]
|
[symbol\

Nicely returns the terminal output into your PD workspace. If you use a terminal command that return multiple lines (i.e. ls), then only the first returned line appears in your symbol box at the end. There may be a way around this but I am pretty new to PD and havent found it yet.

For more involved commands I wrote a little shell script that I can execute from PD which executes the command I want and then writes the output to a text file. Then I load the textfile contents into PD with [textfile]

With some playing around you could probably get your desired voices into PD via one of those approaches. Let me know if it work or if any other problems crop up. Happy hacking!

(oh, and you may be aware of this already but this but whenever you enter a command into [shell] it is executed from the root directory, not the directory where the pd-patch is, so you need full path names for everything you do -- that took me a frustrating hour to figure out)

Ah! but of course, silly me jaja

Thank you very much for your ideas and advice!

best,

@Cobian said:

Dear Forum,

I have many years worth of work on acoustic signal processing in the form of matlab codes and unix shell scripts. I would like to build an interface so that I can get numerical output from a MIDI trigger and feed those numbers into these scripts. Those scripts are set up to write .wav files which can be easily re-loaded into pd.

Any chance you'll post your code where the rest of us can use it in Pd?

Yeah, I keep meaning to do that but I feel I should clean them up first. I am new to PD and, though I am learning fast, these are my first scripts and they are still a little buggy and cumbersome. But I'll re-double my efforts to get them de-bugged and will upload them soon. If I haven't put anything up in a week remind me again!

I'll try to remember to remind you.

But in the meantime, why not just put them up as-is with even a short note about their quality/status, and if you revise them just update what you've posted whenever you get a chance? That's how open source works. In fact, given Pd's very uneven quality and completeness, and even less even documentation, you'd really be getting into the swing of things. Everything in Pd is a work in progress - don't let the perfect be the enemy of the good, or the finished be the enemy of the started. Nobody else seems to let that hold them back, and that's what we've got to work with.

How can I run this shell script?

**ls -al | awk '{ print $5 }'; **

I tried, but can't run.

[ls -al | awk '( print $5 )';(
|
[shell]
|
[print]

but, I couldn't write { and } characters.
keycode 123: dropped

Any ideas?

If I run, **ls -al **
maaya:~ jong$ ls -al
total 96
drwxr-xr-x+ 20 jong staff 680 Oct 7 18:58 .
drwxr-xr-x 6 root admin 204 Oct 4 09:57 ..
-rw------- 1 jong staff 3 Oct 7 12:15 .CFUserTextEncoding
-rw-r--r--@ 1 jong staff 21508 Oct 7 12:20 .DS_Store
drwx------ 5 jong staff 170 Oct 7 18:45 .Trash
-rw------- 1 jong staff 313 Oct 7 18:58 .Xauthority
-rw------- 1 jong staff 5540 Oct 7 18:45 .bash_history
drwxr-xr-x 3 jong staff 102 Oct 7 18:58 .cache
drwx------ 20 jong staff 680 Oct 7 12:25 .dropbox
-rw------- 1 jong staff 56 Oct 7 18:58 .serverauth.1987
drwx------ 3 jong staff 102 Oct 4 16:43 .ssh
-rw------- 1 jong staff 707 Oct 4 10:22 .viminfo
drwx------+ 6 jong staff 204 Oct 7 18:46 Desktop
drwx------+ 7 jong staff 238 Oct 4 17:47 Documents
drwx------+ 5 jong staff 170 Oct 7 18:54 Downloads
drwx------@ 51 jong staff 1734 Oct 7 11:55 Library
drwx------+ 3 jong staff 102 Oct 4 08:31 Movies
drwx------+ 5 jong staff 170 Oct 4 18:07 Music
drwx------+ 4 jong staff 136 Oct 4 09:52 Pictures
drwxr-xr-x+ 4 jong staff 136 Oct 4 08:31 Public

and If I run, **ls -al | awk '{ print $5 }'; **
680
204
3
21508
170
313
5540
102
680
56
102
707
204
238
170
1734
102
170
136
136

I would get only 5th row. How can I do with Pd?

[ls -al(
|
[shell]
|

|
[$5(
|
[whatever else (print?)]

@sebfumaster said:

[ls -al(
|
[shell]
|

|
[$5(
|
[whatever else (print?)]
That won't actually work, since each multiword line from [shell] is a list itself; shell is outputting a list of lists, from which list #n is desired. There is no list of lists (of symbols) native in Pd.

For something called "pure data", Pd has very crude and limited data structures. Especially if the data isn't numeric.

Maybe PDContainer, like some use of [h_multiset data] receiving the shell output, like: [ls -al]-[shell]-[h_multiset data] .

@agitato816 said:

How can I run this shell script?

**ls -al | awk '{ print $5 }'; **

I tried, but can't run.

[ls -al | awk '( print $5 )';(
|
[shell]
|
[print]

but, I couldn't write { and } characters.
keycode 123: dropped

Any ideas?

name the script foo.sh, flip it's executable bit, then send

[./foo.sh(
to
[shell]

will that work for ja?

@Matthew said:

@sebfumaster said:

[ls -al(
|
[shell]
|

|
[$5(
|
[print]
.
It's work, but I got some error...

$5: argument number out of range

@sunji said:

[./foo.sh(
to
[shell]

It doesn't work. Am I wrong?

I wrote a file.
/Users/jong/Desktop/shell-test.sh
ls -al | awk '{ print $5 }';

then

pd file saved in same folder.
[./Users/jong/Desktop/shell-test.sh(
|
[shell]
|
[print]

I got nothing... What's wrong? or What's problem?

It seems work, thanks.

#! filename.sh
ls -al | awk '{ print $5 }';

[sh /path/to/file/filename.sh(
|
[shell]
|
[print]

Thanks sunji!

If the sh file is executable, it works without sh.

http://www.pdpatchrepo.info/hurleur/Screen_Shot_2013-10-08_at_12.43.37_AM.png

It seems work, thanks.

#! filename.sh
ls -al | awk '{ print $5 }';

[sh /path/to/file/filename.sh(
|
[shell]
|
[print]

Thanks sunji!

If the sh file is executable, it works without sh.

http://www.pdpatchrepo.info/hurleur/Screen_Shot_2013-10-08_at_12.43.37_AM.png

Additional Question:

[shell] object with AWK and Perl script also run under Windows or other OS?

I can run this code under Mac OS X, and Linux. But I don't know under Windows...

AWK is Unix script, but Windows isn't Unix like...?