Hi

I'm tryin to use a looper synched to a main metronome. The idea is to begin and end the recording in synch with a metro.
My problem is that when the recorded loop is played back, it's note synched to the source one and keeps on moving on the beat. I suspect it is due to the delay used to create a ramp and avoid clicks, it must substract itself to the duration of the loop

Does anyone know how I could change that to be synched and still have a ramp to avoid clicks ? or should I choose ?

My looper is a subpatch in the attached patch

http://www.pdpatchrepo.info/hurleur/00_pdLive_V1.2.pd

From just looking at the patch, I would just declick the playback instead of recording it in. It looks like you're doing that as well, anyway, so doing both might be overkill. Also, you might want to reset the phase of the [phasor~]s when you start a new loop.

I've resetted the phasor phase, but I don't understand what you mean by "declick the playback instead of recording it", do you mean adding a toggle so that the array won't be read and written at the same time ?

Well I repaired the looper, the problem was that I didn't insert well the armfloat object and I used both Inlet and outlet bangs of the armfloat to go into the timer. Now the path is clearer, it should work with th attached patch

http://www.pdpatchrepo.info/hurleur/00_pdLive_V1.3.pd

I apologize, I misread your patch. By declicking on playback I mean what you're doing with the "crown" array. I thought you were also ramping at the beginning and end as the audio was being filled into the array, but I was just looking at the patch wrong.