Same Patch On RPI works differently?

Reply to Same Patch On RPI works differently? on Wed, 24 Apr 2019 12:52:47 GMT

Fauveboy — Wed, 24 Apr 2019 12:52:47 GMT

I've designed a patch on OSX, it successfully runs on raspbian pi. Accept the lights of a fader on designed for the monome grid interface won't light up? Why would this happen when Other lights do light up when expected? Heres the patch if its required: https://wetransfer.com/downloads/596c2114613328e175388c01f207b49f20190424121908/3db3a0

Reply to Same Patch On RPI works differently? on Wed, 24 Apr 2019 13:41:30 GMT

whale-av — Wed, 24 Apr 2019 13:41:30 GMT

@Fauveboy Must be something to do with comms.
Order of midi ports?
IP address for OSC not the same?
David.

Reply to Same Patch On RPI works differently? on Wed, 24 Apr 2019 13:52:06 GMT

Fauveboy — Wed, 24 Apr 2019 13:52:06 GMT

… well perhaps but what is also confusing is that the same col will still turn the volume up and down, so the pd patch knows the grid interface is there, just no feedback from the leds? it looks like so atm:

Reply to Same Patch On RPI works differently? on Wed, 24 Apr 2019 14:38:55 GMT

whale-av — Wed, 24 Apr 2019 14:38:55 GMT

@Fauveboy Is it a USB device? Not enough power from the RPI unless you use a hub?
Seems unlikely that the problem will be with Pd.
David.

Reply to Same Patch On RPI works differently? on Thu, 25 Apr 2019 06:36:21 GMT

nicnut — Thu, 25 Apr 2019 06:36:21 GMT

I would check the midi settings in Pd to make sure the midi out put is going to the right interface. Depending on the RPi operating system sometimes midi settings and connections are hard to set up.

Reply to Same Patch On RPI works differently? on Thu, 25 Apr 2019 18:34:52 GMT

Fauveboy — Thu, 25 Apr 2019 18:34:52 GMT

@nicnut its communicating with osc via serial ports? would this have settings that need to be looked at ina similar way?