DJ/VJ scratching system
First my story: (you can skip down to END OF STORY if you want)
Ever since I saw Mike Relm go to town with a DVDJ, I've wanted a system where I could scratch and cue video. However, I haven't wanted to spend the $2500 for a DVDJ. As I was researching, I found a number of different systems. I am not a DJ by trade, so to get a system like Traktor or Serrato with their video modules plus turntables plus hardware plus a DJ mixer, soon everything gets really expensive. But in looking around, I found the Ms.Pinky system and after a little bit, I found a USB turntable on Woot for $60. So I bought it. It was marketed as a DJ turntable, but I knew that it wasn't really serious since it had a belt drive, but it came with a slip-pad and the USB connection meant that I wouldn't need a preamp. And so I spend the $100 on the Ms.Pinky vinyl plus software license (now only $80). This worked decently, but I had a lot of trouble really getting it totally on point. The relative mode worked well, but sometimes would skip if I scratched too vigorously. The absolute mode I couldn't get to work at all. After reading a little more, I came to the conclusion that my signal from vinyl to computer just wasn't strong enough, so I would need maybe a new needle or maybe a different turntable and I didn't really want to spend the money experimenting. I think that the Ms. Pinky system is probably a very good system with the right equipment, but I don't do this professionally, so I don't want to spend the loot on a system.
Earlier, before I bought Ms.Pinky (about two years ago), I had also looked around for a cheap MIDI USB DJ controller and not found one. Well, about a month ago, I saw the ION Discover DJ controller was on sale at Bed, Bath & Beyond for $50. They sold out before I could get one, but Vann's was selling it for $70, so I decided that that was good enough and bought one. I had planned to try to use it with Ms. Pinky since you can hook up MIDI controllers to it. But it turns out that you can hook up MIDI controllers to every control except the turntable, so that was a no go. If I had Max/MSP/Jitter, I could have changed that, but that's also way expensive. So, how should I scratch? My controller came with DJ'ing software and there's also some freeware, like Mixxx, but none of this has video support. So I look around and find Pure Data and GEM.
And I see lots of questions about scratching, how to do it. And there are even some tutorials and small patches out there, but as I look at them, none of them are quite what I'm looking for. The YouTube tutorial is really problematic because it's no good at all for scratching a song. It can create a scratching sound for a small sample, but it's taking the turntable's speed and using that as the position in the sample. If you did that with a longer song, it wouldn't even sound like a scratch. And then there are some which do work right, but none of them keep track of where you are in the playback. So, whenever you start scratching, you're starting from the beginning of the song or the middle.
So, I looked at all this and I said, "Hey, I can do this. I've got my spring break coming up. Looking at how easy PD looks and how much other good (if imperfect) work other people have done, I bet that I could build a good system for audio and video scratching within a week." And, I have.
END OF STORY
So that's what I'm presenting to you, my free audio and video scratching system in Pure Data (Pd-extended, really). I use the name DJ Lease Def, so it's the Lease Def DJ system. It's not quite perfect because it loads its samples into tables using soundfiler which means that it has a huge delay when you load a new file during which the whole thing goes silent. I am unhappy about this, but unsure how to fix it. Otherwise, it's pretty nifty. Anyway, rather than be one big patch, it relies on a system of patches which work with each other. Each of the different parts will come in several versions and you can choose which one you want to use and load up the different parts and they should work together correctly. Right now, for most of the parts there's only one version, but I'll be adding others later.
There's a more detailed instruction manual in the .zip file, but the summary is that you load:
the engine (only one version right now): loads the files, does the actual signal processing and playback
one control patch (three versions to choose from currently, two GUI versions and a MIDI version specific to the Ion Discover DJ): is used to do most of the controlling of the engine other than loading files such as scratching, fading, adjusting volume, etc.
zero or one cueing patch (one version, optional): manages the controls for jumping around to different points in songs
zero or one net patch (one version: video playback): does some sort of add-on. Will probably most commonly be used for video. The net patches have to run in a separate instance of Pd-extended and they listen for signals from the engine via local UDP packets. This is set-up this way because when the audio and video tried to run in the same instance, I would get periodic little pops, clicks, and other unsmoothnesses. The audio part renders 1000 times per second for maximum fidelity, but the video part only renders like 30 or 60 times per second. Pure Data is not quite smooth enough to handle this in a clever real-time multithreading manner to ensure that they both always get their time slices. But you put them in separate processes, it all works fine.
So, anyway, it's real scratching beginning exactly where you were in playing the song and when you stop scratching it picks up just where you left off, you can set and jump to cue points, and it does video which will follow right along with both the scratching and cuing. So I'm pretty proud of it. The downsides are that you have to separate the audio and video files, that the audio has to be uncompressed aiff or wav (and that loading a new file pauses everything for like 10 seconds), that for really smooth video when you're scratching or playing backwards you have to encode it with a codec with no inter-frame encoding such as MJPEG, which results in bigger video files (but the playback scratches perfectly as a result).
So anyway, check it out, let me know what you think. If you have any questions or feedback please share. If anyone wants to build control patches for other MIDI hardware, please do and share them with me. I'd be glad to include them in the download. The different patches communicate using send and receive with a standard set of symbols. I've included documentation about what the expected symbols and values are. Also, if anyone wants me to write patches for some piece of hardware that you have, if you can give me one, I'll be glad to do it.
Keith Irwin (DJ Lease Def)
MIDI YOKE beginner
Hello, i stumbled on Pure Data today and loved the idea of controlling Ableton via an ipod touch. So now i've been sitting here for two hours trying to get this to work.
I've downloaded Pure data and the app for the ipod. So far so good.
When i press buttons on the ipod, it recognises that in Pure Data. Going great.
Now, and i should point out i'm on a windows computer, i have to connect it to ableton. No IAC bus midi stuffs since windows don't have those, so Midi Yoke it is.
I have installed Midi Ox (couldn't find Midi Yoke so... is this the same program?)
and i think... i understand it. I set midi out on DP to midi yoke 1. Set Midi yoke 1 in to midi Yoke 1 out in Midi Ox. In ableton i then highlight everything (track, sync and remote) on both Midi yoke 1 out and in (because i dont know what to highlight so...)
now... nothing. I think the problem is that Midi Ox don't recognise the Midi out from DP but i'm not sure. I don't see any changes at all when i press the buttons on the Ipod in Midi ox.
I'm sorry for all this rambling, and i have googled as much as i can but i haven't found any solution. I did find a tutorial named how to setup as i described http://www.gadgetcracker.com/2009/06/how-to-iphone-touchosc-pure-data-ableton-live/ but link just 404
Please help me
BECAUSE you guys are MIDI experts, you could well help on this...
Dear Anyone who understands virtual MIDI circuitry
I'm a disabled wannabe composer who has to use a notation package and mouse, because I can't physically play a keyboard. I use Quick Score Elite Level 2 - it doesn't have its own forum - and I'm having one HUGE problem with it that's stopping me from mixing - literally! I can see it IS possible to do what I want with it, I just can't get my outputs and virtual circuitry right.
I've got 2 main multi-sound plug-ins I use with QSE. Sampletank 2.5 with Miroslav Orchestra and Proteus VX. Now if I choose a bunch of sounds from one of them, each sound comes up on its own little stave and slider, complete with places to insert plug-in effects (like EQ and stuff.) So far, so pretty.
So you've got - say - 5 sounds. Each one is on its own stave, so any notes you put on that stave get played by that sound. The staves have controllers so you can control the individual sound's velocity/volume/pan/aftertouch etc. They all work fine. There are also a bunch of spare controller numbers. The documentation with QSE doesn't really go into how you use those. It's a great program but its customer relations need sorting - no forum, Canadian guys who wrote it very rarely answer E-mails in a meaningful way, hence me having to ask this here.
Except the sliders don't DO anything! The only one that does anything is the one the main synth. is on. That's the only one that takes any notice of the effects you use. Which means you're putting the SAME effect on the WHOLE SYNTH, not just on one instrument sound you've chosen from it. Yet the slider the main synth is on looks exactly the same as all the other sliders. The other sliders just slide up and down without changing the output sounds in any way. Neither do any effects plugins you put on the individual sliders change any of the sounds in any way. The only time they work is if you put them on the main slider that the whole synth. is sitting on - and then, of course, the effect's applied to ALL the sounds coming out of that synth, not just the single sound you want to alter.
I DO understand that MIDI isn't sounds, it's instructions to make sounds, but if the slider the whole synth is on works, how do you route the instructions to the other sliders so they accept them, too?
Anyone got any idea WHY the sounds aren't obeying the sliders they're sitting on? Oddly enough, single-shot plug-ins DO obey the sliders perfectly. It's just the multi-sound VSTs who's sounds don't individually want to play ball.
Now when you select a VSTi, you get 2 choices - assign to a track or use All Channels. If you assign it to a track, of course only instructions routed to that track will be picked up by the VSTi. BUT - they only go to the one instrument on that VST channel. So you can then apply effects happily to the sound on Channel One. I can't work out how to route the effects for the instrument on Channel 2 to Channel 2 in the VSTi, and so on. Someone told me on another forum that because I've got everything on All Channels, the effects signals are cancelling eachother out, I can't find out anything about this at the moment.
I know, theoretically, if I had one instance of the whole synth and just used one instrument from each instance, that would work. It does. Thing is, with Sampletank I got Miroslav Orchestra and you can't load PART of Miroslav. It's all or nothing. So if I wanted 12 instruments that way, I'd have to have 12 copies of Miroslav in memory and you just don't get enough memory in a 32 bit PC for that.
To round up. What I'm trying to do is set things up so I can send separate effects - EQ etc - to separate virtual instruments from ONE instance of a multi-sound sampler (Proteus VX or Sampletank.) I know it must be possible because the main synth takes the effects OK, it's just routing them to the individual sounds that's thrown me. I know you get one-shot sound VSTi's, but - no offence to any creators here - the sounds usually aint that good from them. Besides, all my best sounds are in Miroslav/Proteus VX and I just wanted to be able to create/mix pieces using those.
I'm a REAL NOOOB with all this so if anyone answers - keep it simple. Please! If anyone needs more info to answer this, just ask me what info you need and I'll look it up on the program.
Yours respectfully
ulrichburke
Traktor (will work with others)Coge Midi clock Sync with OSC
This is a cross platform alternative for synchronizing two(or more) different computers to one Midi Clock.
Since one will have coge this will be between a Mac OSX and windows running traktor that produces midi clock.
For windows Midi Yoke (tested in XP) to wrap Midi clock to Pure Data extended (tested with v 0.41.4) from there the clock will be sent has an OSC message to one or all network computer(s). On the listening side there will be one other Pure Data patch converting a specific OSC message to Midi clock. Then coge can catch this midi clock just by clicking "Midi clk".
This is nothing special but it took me almost 3 weeks to accomplish it. Given that i knew nothing about pure data at the time, this site was very helpful. All examples were gathered from here.
Also note that this is not the best way.
There are Midi cables for this.
There are usb to midi converters, for those who don't have midi ports. Also external sound boards quite good with several inputs and outputs.
I have experienced a +/- 3 Beats float of BPM count on coge but always around the correct number, over time this seems to float less.
This still lacks testing.
Anyway.
You'll need Pure data extended on every machine.
You'll need Midi Yoke on Windows.
You can use Yac Driver on Mac OSX for midi wrap.
Don't know for linux, sorry. (read somewhere something about jack)
On pure data you'll need to define the midi device input or output which ever is the case.
On windows it's easy on any pure data windows you can set midi devices, choose midi Yoke (the channel number should be the same in the receiver input and sender output).
On OSX it's on the main window, under preferences.
If using this with quartz composer one can skip the pure data on the OSC server side (which is the one that listens). If adding more functions to this keep in mind that quartz composer does not understands 0 arguments messages. (I think this should be a bug)
You are advised to change the IP on the pure data patch to which ever is your destination. You can use 0.0.0.0 to broadcast. Don't use wireless, it's a 0 security communication protocol.
Hope to save someone's time. GL
Fedora 10 : Gem: can't load library
hi there,
I've got pd running fine for sounds but I'ld like Gem (for a reactable); but I've got this error at pd startup :
Gem: can't load library
I am with Fedora 10,
kernel :
$ uname -a
Linux hal 2.6.27.37-170.2.104.fc10.i686 #1 SMP Mon Oct 12 22:01:53 EDT 2009 i686 i686 i386 GNU/Linux
pd version :
$ yum info pd
Loaded plugins: refresh-packagekit
Available Packages
Name : pd
Arch : i386
Version : 0.39.3
Release : 1.cvs.07.07.23.fc10.ccrma
Size : 5.9 M
Repo : planetccrma
Summary : Real-time patchable audio and multimedia processor.
URL : http://pure-data.sourceforge.net/
License : GPL
Description: Pd gives you a canvas for patching together modules that analyze,
: process, and synthesize sounds, together with a rich palette of
: real-time control and I/O possibilities. Similar to Max
: (Cycling74) and JMAX (IRCAM). A related software package named Gem
: extends Pd's capabilities to include graphical rendering.
Here is what pd tells when started with "pd" :
[import] $Revision: 1.2 $
[import] is still in development, the interface could change!
compiled against Pd version 0.41.4
couldn't open MIDI input device 0
couldn't open MIDI output device 0
opened 0 MIDI input device(s) and 0 MIDI output device(s).
libdir loader $Revision: 1.8 $
compiled on Oct 27 2009 at 17:32:35
compiled against Pd version 0.41.4.extended
Gem: can't load library
libdir_loader: added 'cyclone' to the global objectclass path
libdir_loader: added 'zexy' to the global objectclass path
libdir_loader: added 'creb' to the global objectclass path
libdir_loader: added 'cxc' to the global objectclass path
libdir_loader: added 'iemlib' to the global objectclass path
libdir_loader: added 'list-abs' to the global objectclass path
libdir_loader: added 'mapping' to the global objectclass path
libdir_loader: added 'markex' to the global objectclass path
libdir_loader: added 'maxlib' to the global objectclass path
libdir_loader: added 'memento' to the global objectclass path
libdir_loader: added 'mjlib' to the global objectclass path
libdir_loader: added 'motex' to the global objectclass path
libdir_loader: added 'oscx' to the global objectclass path
libdir_loader: added 'pddp' to the global objectclass path
libdir_loader: added 'pdogg' to the global objectclass path
libdir_loader: added 'pixeltango' to the global objectclass path
libdir_loader: added 'rradical' to the global objectclass path
libdir_loader: added 'sigpack' to the global objectclass path
libdir_loader: added 'smlib' to the global objectclass path
libdir_loader: added 'toxy' to the global objectclass path
libdir_loader: added 'unauthorized' to the global objectclass path
libdir_loader: added 'pan' to the global objectclass path
libdir_loader: added 'freeverb' to the global objectclass path
libdir_loader: added 'hcs' to the global objectclass path
libdir_loader: added 'jmmmp' to the global objectclass path
libdir_loader: added 'ext13' to the global objectclass path
libdir_loader: added 'ggee' to the global objectclass path
libdir_loader: added 'flib' to the global objectclass path
libdir_loader: added 'ekext' to the global objectclass path
libdir_loader: added 'flatspace' to the global objectclass path
pdp: can't load library
pidip: can't load library
And here is part of what pd tells when started with "pd -verbose" :
libdir loader $Revision: 1.8 $
compiled on Oct 27 2009 at 17:32:35
compiled against Pd version 0.41.4.extended
tried ./Gem.l_i386 and failed
tried /usr/share/fonts/bitstream-vera/Gem.l_i386 and failed
tried /usr/lib/pd/extra/cyclone/Gem.l_i386 and failed
tried /usr/lib/pd/extra/zexy/Gem.l_i386 and failed
tried /usr/lib/pd/extra/creb/Gem.l_i386 and failed
tried /usr/lib/pd/extra/cxc/Gem.l_i386 and failed
tried /usr/lib/pd/extra/iemlib/Gem.l_i386 and failed
tried /usr/lib/pd/extra/list-abs/Gem.l_i386 and failed
tried /usr/lib/pd/extra/mapping/Gem.l_i386 and failed
tried /usr/lib/pd/extra/jmmmp/Gem.l_i386 and failed
tried /usr/lib/pd/extra/maxlib/Gem.l_i386 and failed
tried /usr/lib/pd/extra/memento/Gem.l_i386 and failed
tried /usr/lib/pd/extra/mjlib/Gem.l_i386 and failed
tried /usr/lib/pd/extra/markex/Gem.l_i386 and failed
tried /usr/lib/pd/extra/oscx/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pddp/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pdogg/Gem.l_i386 and failed
tried /usr/lib/pd/extra/motex/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pmpd/Gem.l_i386 and failed
tried /usr/lib/pd/extra/rradical/Gem.l_i386 and failed
tried /usr/lib/pd/extra/sigpack/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pixeltango/Gem.l_i386 and failed
tried /usr/lib/pd/extra/toxy/Gem.l_i386 and failed
tried /usr/lib/pd/extra/unauthorized/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pan/Gem.l_i386 and failed
tried /usr/lib/pd/extra/smlib/Gem.l_i386 and failed
tried /usr/lib/pd/extra/hcs/Gem.l_i386 and failed
tried /usr/lib/pd/extra/freeverb/Gem.l_i386 and failed
tried /usr/lib/pd/extra/ggee/Gem.l_i386 and failed
tried /usr/lib/pd/extra/ext13/Gem.l_i386 and failed
tried /usr/lib/pd/extra/flib/Gem.l_i386 and failed
tried /usr/lib/pd/extra/ekext/Gem.l_i386 and failed
tried /usr/lib/pd/extra/Gem.l_i386 and failed
tried /usr/lib/pd/extra/flatspace/Gem.l_i386 and failed
tried /home/zbl/pd-externals/Gem.l_i386 and failed
tried /usr/local/lib/pd-externals/Gem.l_i386 and failed
tried /usr/lib/pd/extra/Gem.l_i386 and failed
tried ./Gem.pd_linux and failed
tried /usr/share/fonts/bitstream-vera/Gem.pd_linux and failed
tried /usr/lib/pd/extra/cyclone/Gem.pd_linux and failed
tried /usr/lib/pd/extra/zexy/Gem.pd_linux and failed
tried /usr/lib/pd/extra/creb/Gem.pd_linux and failed
tried /usr/lib/pd/extra/cxc/Gem.pd_linux and failed
tried /usr/lib/pd/extra/iemlib/Gem.pd_linux and failed
tried /usr/lib/pd/extra/list-abs/Gem.pd_linux and failed
tried /usr/lib/pd/extra/mapping/Gem.pd_linux and failed
tried /usr/lib/pd/extra/jmmmp/Gem.pd_linux and failed
tried /usr/lib/pd/extra/maxlib/Gem.pd_linux and failed
tried /usr/lib/pd/extra/memento/Gem.pd_linux and failed
tried /usr/lib/pd/extra/mjlib/Gem.pd_linux and failed
tried /usr/lib/pd/extra/markex/Gem.pd_linux and failed
tried /usr/lib/pd/extra/oscx/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pddp/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pdogg/Gem.pd_linux and failed
tried /usr/lib/pd/extra/motex/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pmpd/Gem.pd_linux and failed
tried /usr/lib/pd/extra/rradical/Gem.pd_linux and failed
tried /usr/lib/pd/extra/sigpack/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pixeltango/Gem.pd_linux and failed
tried /usr/lib/pd/extra/toxy/Gem.pd_linux and failed
tried /usr/lib/pd/extra/unauthorized/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pan/Gem.pd_linux and failed
tried /usr/lib/pd/extra/smlib/Gem.pd_linux and failed
tried /usr/lib/pd/extra/hcs/Gem.pd_linux and failed
tried /usr/lib/pd/extra/freeverb/Gem.pd_linux and failed
tried /usr/lib/pd/extra/ggee/Gem.pd_linux and failed
tried /usr/lib/pd/extra/ext13/Gem.pd_linux and failed
tried /usr/lib/pd/extra/flib/Gem.pd_linux and failed
tried /usr/lib/pd/extra/ekext/Gem.pd_linux and failed
tried /usr/lib/pd/extra/Gem.pd_linux and failed
tried /usr/lib/pd/extra/flatspace/Gem.pd_linux and failed
tried /home/zbl/pd-externals/Gem.pd_linux and failed
tried /usr/local/lib/pd-externals/Gem.pd_linux and failed
tried /usr/lib/pd/extra/Gem.pd_linux and failed
tried ./Gem/Gem.l_i386 and failed
tried /usr/share/fonts/bitstream-vera/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/cyclone/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/zexy/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/creb/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/cxc/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/iemlib/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/list-abs/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/mapping/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/jmmmp/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/maxlib/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/memento/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/mjlib/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/markex/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/oscx/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pddp/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pdogg/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/motex/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pmpd/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/rradical/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/sigpack/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pixeltango/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/toxy/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/unauthorized/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/pan/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/smlib/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/hcs/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/freeverb/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/ggee/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/ext13/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/flib/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/ekext/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/flatspace/Gem/Gem.l_i386 and failed
tried /home/zbl/pd-externals/Gem/Gem.l_i386 and failed
tried /usr/local/lib/pd-externals/Gem/Gem.l_i386 and failed
tried /usr/lib/pd/extra/Gem/Gem.l_i386 and failed
tried ./Gem/Gem.pd_linux and failed
tried /usr/share/fonts/bitstream-vera/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/cyclone/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/zexy/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/creb/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/cxc/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/iemlib/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/list-abs/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/mapping/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/jmmmp/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/maxlib/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/memento/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/mjlib/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/markex/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/oscx/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pddp/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pdogg/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/motex/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pmpd/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/rradical/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/sigpack/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pixeltango/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/toxy/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/unauthorized/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/pan/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/smlib/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/hcs/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/freeverb/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/ggee/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/ext13/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/flib/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/ekext/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/flatspace/Gem/Gem.pd_linux and failed
tried /home/zbl/pd-externals/Gem/Gem.pd_linux and failed
tried /usr/local/lib/pd-externals/Gem/Gem.pd_linux and failed
tried /usr/lib/pd/extra/Gem/Gem.pd_linux and failed
tried ./Gem/Gem-meta.pd and failed
tried /usr/share/fonts/bitstream-vera/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/cyclone/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/zexy/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/creb/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/cxc/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/iemlib/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/list-abs/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/mapping/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/jmmmp/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/maxlib/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/memento/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/mjlib/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/markex/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/oscx/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/pddp/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/pdogg/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/motex/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/pmpd/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/rradical/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/sigpack/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/pixeltango/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/toxy/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/unauthorized/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/pan/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/smlib/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/hcs/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/freeverb/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/ggee/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/ext13/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/flib/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/ekext/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/flatspace/Gem/Gem-meta.pd and failed
tried /home/zbl/pd-externals/Gem/Gem-meta.pd and failed
tried /usr/local/lib/pd-externals/Gem/Gem-meta.pd and failed
tried /usr/lib/pd/extra/Gem/Gem-meta.pd and failed
Gem: can't load library
I can't locate files like Gem-meta.pd or Gem.pd_linux on the computer;
I keep investigating, but any hint is welcome, thanks
More midi output device options needed
Yes, I already use something like midi yoke now. It is the standard osx midi routing software called IAC.
I forgot to mention in my question that I use one IAC output port to send signals from the PD patch to Ableton. In ableton I route signals from this IAC port to my MIDI outs (connected to the machines).
The other output I use to send signals to my controller, so that when I change the parameter of a knob I can send the current value of that parameter to the knob of the behringer (when I turn this knob the value doesn;t jump but starts from the value it is actually on).
This liimits my possibilities, I want to be able to filter out signals for certain machines. But now I can only use one actual midi output, The IAC bus.
The nice thing about PD;s midi controller interface is that another midi output is a different midi channel. So when I could have 4 midi output possibilities it would enable me to press a button that says to a knob: send to channel 17 (channel one of the second midi output device) instead of sending to channel 33 (channel one of the third midi output device).
I hope this is possiible. I think it actually is, because there are four midi inputs available.
How do you guys use PD with other audio programs?
didnt know jack also worked for windows xp?
EDIT:just downloaded jack from the website,but i get all kinds of errors when i try to unzip?
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot open Versions\Current\Headers (jack-1.9.2\bin\osx_32bits\Jackmp.framework\Headers --> Versions\Current\Headers)
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Symbolic link points to missing file
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot open Versions\Current\Jackmp (jack-1.9.2\bin\osx_32bits\Jackmp.framework\Jackmp --> Versions\Current\Jackmp)
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Symbolic link points to missing file
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot open Versions\Current\Resources (jack-1.9.2\bin\osx_32bits\Jackmp.framework\Resources --> Versions\Current\Resources)
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Symbolic link points to missing file
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create ersions\Current\Headers
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Jackservermp
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Resources
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot open jack-1.9.2\bin\osx_32bits\Jackservermp.framework\Resources (A --> jack-1.9.2\bin\osx_32bits\Jackservermp.framework\Resources)
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Symbolic link points to missing file
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Panda
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Resources
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot open jack-1.9.2\bin\osx_32bits\Panda.framework\Resources (A --> jack-1.9.2\bin\osx_32bits\Panda.framework\Resources)
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Symbolic link points to missing file
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Headers
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Jackmp
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Resources
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot open jack-1.9.2\bin\osx_64bits\Jackmp.framework\Resources (A --> jack-1.9.2\bin\osx_64bits\Jackmp.framework\Resources)
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Symbolic link points to missing file
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Headers
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Jackservermp
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Resources
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot open jack-1.9.2\bin\osx_64bits\Jackservermp.framework\Resources (A --> jack-1.9.2\bin\osx_64bits\Jackservermp.framework\Resources)
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Symbolic link points to missing file
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Panda
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create Versions\Current\Resources
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot open jack-1.9.2\bin\osx_64bits\Panda.framework\Resources (A --> jack-1.9.2\bin\osx_64bits\Panda.framework\Resources)
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Symbolic link points to missing file
! C:\Documents and Settings\administartor\Desktop\jack audio\jack-1.9.2.tgz: Cannot create
"Morphine" - fx-morphing engine
this is the errors i get.really love the GUI though:)
any2string 128 -1
... couldn't create
string2any
... couldn't create
[demultiplex] part of zexy-2.2.3 (compiled: Jun 4 2009)
Copyright (l) 1999-2008 IOhannes m zmölnig, forum::für::umläute & IEM
[length] part of zexy-2.2.3 (compiled: Jun 4 2009)
Copyright (l) 1999-2008 IOhannes m zmölnig, forum::für::umläute & IEM
[makesymbol] part of zexy-2.2.3 (compiled: Jun 4 2009)
Copyright (l) 1999-2008 IOhannes m zmölnig, forum::für::umläute & IEM
any2string 128 -1
... couldn't create
string2any
... couldn't create
getdollarzero 10
... couldn't create
wahwah~: an audio wahwah, version 0.1 (ydegoyon@free.fr)
expr, expr~, fexpr~ version 0.4 under GNU General Public License
any2string 128 -1
... couldn't create
string2any
... couldn't create
any2string 128 -1
... couldn't create
string2any
... couldn't create
getdollarzero 10
... couldn't create
any2string 128 -1
... couldn't create
string2any
... couldn't create
any2string 128 -1
... couldn't create
string2any
... couldn't create
getdollarzero 10
... couldn't create
any2string 128 -1
... couldn't create
string2any
... couldn't create
any2string 128 -1
... couldn't create
string2any
... couldn't create
getdollarzero 10
... couldn't create
"Morphine" - fx-morphing engine
for some reason, the list of error messages became even longer......
mix.switch.nice 101
... couldn't create
init.post.dollarg
... couldn't create
flow.receive
... couldn't create
flow.send
... couldn't create
list.split 1
... couldn't create
flow.send
... couldn't create
flow.send
... couldn't create
flow.receive
... couldn't create
[makesymbol] part of zexy-2.2.3 (compiled: Feb 25 2009)
Copyright (l) 1999-2008 IOhannes m zmölnig, forum::für::umläute & IEM
flow.@parse
... couldn't create
flow.receive
... couldn't create
init.dollar.zero.top
... couldn't create
flow.receive
... couldn't create
flow.receive
... couldn't create
list.build
... couldn't create
[demultiplex] part of zexy-2.2.3 (compiled: Feb 25 2009)
Copyright (l) 1999-2008 IOhannes m zmölnig, forum::für::umläute & IEM
init.make.unique
... couldn't create
flow.receive
... couldn't create
flow.receive
... couldn't create
flow.send
... couldn't create
list.split 1
... couldn't create
list.split 1
... couldn't create
list.length
... couldn't create
flow.send
... couldn't create
flow.send
... couldn't create
wahwah~: an audio wahwah, version 0.1 (ydegoyon@free.fr)
expr, expr~, fexpr~ version 0.4 under GNU General Public License
mix.switch.nice 101
... couldn't create
init.post.dollarg
... couldn't create
flow.receive
... couldn't create
flow.send
... couldn't create
list.split 1
... couldn't create
flow.send
... couldn't create
flow.send
... couldn't create
flow.receive
... couldn't create
flow.@parse
... couldn't create
flow.receive
... couldn't create
init.dollar.zero.top
... couldn't create
flow.receive
... couldn't create
flow.receive
... couldn't create
list.build
... couldn't create
init.make.unique
... couldn't create
flow.receive
... couldn't create
flow.receive
... couldn't create
flow.send
... couldn't create
list.split 1
... couldn't create
list.split 1
... couldn't create
list.length
... couldn't create
flow.send
... couldn't create
flow.send
... couldn't create
mix.switch.nice 101
... couldn't create
init.post.dollarg
... couldn't create
flow.receive
... couldn't create
flow.send
... couldn't create
list.split 1
... couldn't create
flow.send
... couldn't create
flow.send
... couldn't create
flow.receive
... couldn't create
flow.@parse
... couldn't create
flow.receive
... couldn't create
init.dollar.zero.top
... couldn't create
flow.receive
... couldn't create
flow.receive
... couldn't create
list.build
... couldn't create
init.make.unique
... couldn't create
flow.receive
... couldn't create
flow.receive
... couldn't create
flow.send
... couldn't create
list.split 1
... couldn't create
list.split 1
... couldn't create
list.length
... couldn't create
flow.send
... couldn't create
flow.send
... couldn't create
mix.switch.nice 101
... couldn't create
init.post.dollarg
... couldn't create
flow.receive
... couldn't create
flow.send
... couldn't create
list.split 1
... couldn't create
flow.send
... couldn't create
flow.send
... couldn't create
flow.receive
... couldn't create
flow.@parse
... couldn't create
flow.receive
... couldn't create
init.dollar.zero.top
... couldn't create
flow.receive
... couldn't create
flow.receive
... couldn't create
list.build
... couldn't create
init.make.unique
... couldn't create
flow.receive
... couldn't create
flow.receive
... couldn't create
flow.send
... couldn't create
list.split 1
... couldn't create
list.split 1
... couldn't create
list.length
... couldn't create
flow.send
... couldn't create
flow.send
... couldn't create
error: inlet: expected '' but got 'symbol'
... you might be able to track this down from the Find menu.
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'list'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'list'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'list'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'list'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'list'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'list'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'list'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'symbol'
error: inlet: expected '' but got 'list'
i'd really love to check out, what you have build there!
Can't run PD 0.42-4 under OSX 10.4.11
I'm getting a similar problem on 10.5.7. I'm also getting crashes when trying to select my M-Box Micro as the output in Pd..
Process: mds [21]
Path: /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework/Support/mds
Identifier: mds
Version: (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2008-09-23 14:48:39.862 +1000
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
Crashed Thread: 18
Application Specific Information:
/SourceCache/Spotlight/Spotlight-398.18/index/ContentIndex/CIMerging.c:1958: failed assertion 'changes->docIds[0].count==0'
(Error) IndexStore in SIStoreDirytySDBChunks:Error storing dirty sdb pages: 30
Thread 0:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x0000e6c3 0x1000 + 54979
6 mds 0x00005956 0x1000 + 18774
Thread 1:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x0000d61d 0x1000 + 50717
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 2:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x0000d640 0x1000 + 50752
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x0000d663 0x1000 + 50787
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 4:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x0000d686 0x1000 + 50822
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 5:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x0000d6a9 0x1000 + 50857
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 6:
0 libSystem.B.dylib 0x95fbf68e __semwait_signal + 10
1 libSystem.B.dylib 0x960108e0 pthread_cond_timedwait$UNIX2003 + 72
2 mds 0x0000a3f7 0x1000 + 37879
3 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
4 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 7:
0 libSystem.B.dylib 0x95fdc1ba read$UNIX2003 + 10
1 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
2 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 8:
0 libSystem.B.dylib 0x95fe8f66 kevent + 10
1 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
2 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 9:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x0008714c 0x1000 + 549196
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 10:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x00054157 0x1000 + 340311
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 11:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x00054157 0x1000 + 340311
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 12:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x00054157 0x1000 + 340311
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 13:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.spotlight.index 0x0022a3da _handleExceptions + 238
3 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
4 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 14:
0 libSystem.B.dylib 0x95fb84a6 mach_msg_trap + 10
1 libSystem.B.dylib 0x95fbfc9c mach_msg + 72
2 com.apple.CoreFoundation 0x92bda0ce CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x92bdacf8 CFRunLoopRunInMode + 88
4 mds 0x00058504 0x1000 + 357636
5 mds 0x000448f3 0x1000 + 276723
6 mds 0x000582d2 0x1000 + 357074
7 com.apple.Foundation 0x9631bf1d -[NSThread main] + 45
8 com.apple.Foundation 0x9631bac4 __NSThread__main__ + 308
9 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
10 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 15:
0 libSystem.B.dylib 0x95fb8506 semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x95fea84f _pthread_cond_wait + 1244
2 libSystem.B.dylib 0x95fec0d3 pthread_cond_timedwait_relative_np + 47
3 com.apple.spotlight.index 0x0018b180 si_scheduler_run_waiting_timeout + 163
4 com.apple.spotlight.index 0x00176e50 runLoop + 77
5 com.apple.spotlight.index 0x00176f3c setattr_runLoop + 68
6 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
7 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 16:
0 libSystem.B.dylib 0x95fb8506 semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x95fea84f _pthread_cond_wait + 1244
2 libSystem.B.dylib 0x95fec0d3 pthread_cond_timedwait_relative_np + 47
3 com.apple.spotlight.index 0x0018b180 si_scheduler_run_waiting_timeout + 163
4 com.apple.spotlight.index 0x00176e50 runLoop + 77
5 com.apple.spotlight.index 0x00176eaa query_runLoop + 30
6 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
7 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 17:
0 libSystem.B.dylib 0x95fb8506 semaphore_timedwait_signal_trap + 10
1 libSystem.B.dylib 0x95fea84f _pthread_cond_wait + 1244
2 libSystem.B.dylib 0x95fec0d3 pthread_cond_timedwait_relative_np + 47
3 com.apple.spotlight.index 0x0018b180 si_scheduler_run_waiting_timeout + 163
4 com.apple.spotlight.index 0x00176e50 runLoop + 77
5 com.apple.spotlight.index 0x0017705d flush_runLoop + 65
6 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
7 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 18 Crashed:
0 com.apple.spotlight.index 0x002370af _dead_beef + 11
1 com.apple.spotlight.index 0x002307c7 merge_checkAgainstUpdates + 181
2 com.apple.spotlight.index 0x00230a00 PayloadProcessDocIDRangeBitsReversed + 387
3 com.apple.spotlight.index 0x0020ef96 unpackPostingChunk + 422
4 com.apple.spotlight.index 0x0023517b mergeIndexData + 13180
5 com.apple.spotlight.index 0x001a0da6 _ContentIndexMergeIndexes + 128
6 com.apple.spotlight.index 0x001a0fe2 ContentIndexMergeIndexes + 248
7 com.apple.spotlight.index 0x0017ec59 OuterMerge + 1310
8 com.apple.spotlight.index 0x001806fe si_mergeIndex + 4007
9 com.apple.spotlight.index 0x0018aca9 si_work_queue_process + 643
10 com.apple.spotlight.index 0x0018af97 si_scheduler_once + 419
11 com.apple.spotlight.index 0x0018af97 si_scheduler_once + 419
12 com.apple.spotlight.index 0x0018b322 si_scheduler_run_waiting_timeout + 581
13 com.apple.spotlight.index 0x00176e50 runLoop + 77
14 com.apple.spotlight.index 0x00176fce compaction_runLoop + 68
15 libSystem.B.dylib 0x95fe96f5 _pthread_start + 321
16 libSystem.B.dylib 0x95fe95b2 thread_start + 34
Thread 18 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x00230733 ecx: 0x00000000 edx: 0x00000000
edi: 0x00000000 esi: 0x00000616 ebp: 0xb0991738 esp: 0xb0991730
ss: 0x0000001f efl: 0x00010286 eip: 0x002370af cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x00000000
Binary Images:
0x1000 - 0xb9feb mds (???) <63f8cd1f41b3382ec7d38bb5f76a20c1> /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework/Support/mds
0xd7000 - 0xd8ffd com.apple.MDSChannel 1.0 (1.0) /System/Library/PrivateFrameworks/MDSChannel.framework/Versions/A/MDSChannel
0x14a000 - 0x25fff7 com.apple.spotlight.index 10.5.2 (398.18) <cc6d210e1fcd007cb427861ccd748e13> /System/Library/PrivateFrameworks/SpotlightIndex.framework/Versions/A/SpotlightIndex
0x6cf000 - 0x6d4ff7 libgermantok.dylib (???) <5608319ae54efad75bb8af543f67134f> /usr/lib/libgermantok.dylib
0x2bce000 - 0x2bceffd liblangid.dylib (???) <d1bba9ec9142b4eb33db9c24d504ac63> /usr/lib/liblangid.dylib
0x30bd000 - 0x31e4feb libmecab.1.0.0.dylib (???) <d42fb7fb40a58840dd30e4364635c245> /usr/lib/libmecab.1.0.0.dylib
0x8fe00000 - 0x8fe2da53 dyld 96.2 (???) <5013f43c4d2c33c9619011f103ec3238> /usr/lib/dyld
0x90291000 - 0x902a0ffe com.apple.DSObjCWrappers.Framework 1.2.1 (1.2.1) <43c5b91223501f917392f59fbf9d7ace> /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWrappers
0x90905000 - 0x9093cfff com.apple.SystemConfiguration 1.9.2 (1.9.2) <8b26ebf26a009a098484f1ed01ec499c> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration
0x9093d000 - 0x9099affb libstdc++.6.dylib (???) <6106b1f2b0b303b06ae476253dbb5f3f> /usr/lib/libstdc++.6.dylib
0x9099b000 - 0x909e1fef com.apple.Metadata 10.5.2 (398.18) <adbb3a14e8f7da444e16d2fd61862771> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata
0x909e2000 - 0x90ac3ff7 libxml2.2.dylib (???) <1baef3d4972ee789d8fa6c1fa44da45c> /usr/lib/libxml2.2.dylib
0x90aff000 - 0x90bf3ff4 libiconv.2.dylib (???) <3f183527811098bb7332f67a1f902bfd> /usr/lib/libiconv.2.dylib
0x90bf4000 - 0x90c7ffff com.apple.framework.IOKit 1.5.1 (???) <60cfc4b175c4ef60bb8e9036716a29f4> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x92417000 - 0x9254fff7 libicucore.A.dylib (???) <5031226ea28b371d8dfdbb32acfb48b5> /usr/lib/libicucore.A.dylib
0x92551000 - 0x9256fff3 com.apple.DirectoryService.Framework 3.5.4 (3.5.4) <fe27e80e1a9e86403fd9ed16dcfe4e11> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryService
0x92570000 - 0x9264ffff libobjc.A.dylib (???) <99a9ad33ca07114848fdd7580968a572> /usr/lib/libobjc.A.dylib
0x92650000 - 0x9270afe3 com.apple.CoreServices.OSServices 226.5 (226.5) <7e10d25c615a39fe1ab4d48e24a3b555> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices
0x92756000 - 0x92756ffa com.apple.CoreServices 32 (32) <2760719f7a81e8c2bdfd15b0939abc29> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x92b68000 - 0x92c9afff com.apple.CoreFoundation 6.5.3 (476.14) <7ef7f5db09ff6dd0135a6165872803cc> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x934e8000 - 0x93574ff7 com.apple.LaunchServices 289.2 (289.2) <3577886e3a6d56ee3949850c4fde76c9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices
0x93de5000 - 0x93dfbfff com.apple.DictionaryServices 1.0.0 (1.0.0) <7e9ff586b5c9d02b09e2a5527d98524f> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/DictionaryServices.framework/Versions/A/DictionaryServices
0x93e13000 - 0x93e3efe7 libauto.dylib (???) <2072d673706bbe463ed2426af57a28d7> /usr/lib/libauto.dylib
0x944dc000 - 0x944e4fff com.apple.DiskArbitration 2.2.1 (2.2.1) <42908e7ecc17a83cec4afef2850ec79e> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x94991000 - 0x94a13ff3 com.apple.CFNetwork 330.4 (330.4) <ce5b085df34a78b7f198aff9db5b52ec> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
0x94c22000 - 0x94df0fff com.apple.security 5.0.4 (34102) <f01d6cbd6a0f24f6c13952ed448e77d6> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x950cf000 - 0x950f3fff libxslt.1.dylib (???) <59399cc446ed903fd9479526ee9f116b> /usr/lib/libxslt.1.dylib
0x955da000 - 0x95609fe3 com.apple.AE 402.2 (402.2) <d0da935e781446faa4563e7a9c587cce> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE
0x9563b000 - 0x956c2ff7 libsqlite3.0.dylib (???) <11311084bc4be9d4555dfac74fe7218a> /usr/lib/libsqlite3.0.dylib
0x9573a000 - 0x95741fe9 libgcc_s.1.dylib (???) <28a7cbc3a5ca2982d124668306f422d9> /usr/lib/libgcc_s.1.dylib
0x95ad9000 - 0x95ae7ffd libz.1.dylib (???) <545ca09467025f77131cfac09d8b9375> /usr/lib/libz.1.dylib
0x95e13000 - 0x95e92ff5 com.apple.SearchKit 1.2.0 (1.2.0) <5abfde5537969168b8a8743ccb9ec735> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit
0x95fb7000 - 0x96117ff3 libSystem.B.dylib (???) <a12f397abf2285077b89bd726bff5b18> /usr/lib/libSystem.B.dylib
0x96311000 - 0x9658cfe7 com.apple.Foundation 6.5.5 (677.19) <bfd4ebea1a7739dd6b523f15dca01a37> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x9662a000 - 0x9662efff libmathCommon.A.dylib (???) /usr/lib/system/libmathCommon.A.dylib
0x96bec000 - 0x96bf3ffe libbsm.dylib (???) <5582985a86ea36504cca31788bccf963> /usr/lib/libbsm.dylib
0x96bf7000 - 0x96ed1ff3 com.apple.CoreServices.CarbonCore 786.6 (786.6) <bc7c12c84fe21ae2626bdd17070aaafa> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore
0xfffe8000 - 0xfffebfff libobjc.A.dylib (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib (???) /usr/lib/libSystem.B.dylib