Hi,

Three questions

1. Does anyone know what command(s) I use to control a synth patch in Pure Data using the keyboard of my laptop?

2. Another thing I am wondering about is how I might control a synth with a piano. I have a midi to usb cable that I can connect from my laptop to the keyboard.

3. Are there any great synth patches available for download to experiment with?

thanks

Mmm... posting something seems tricky... Maybe this works.

http://www.jittered.com/pd/simplesampler.zip

D.

@lapras53 said:

Could I use a -resize flag in combination with the readtab4~ command in order to automatically resize the array table that the sound file is read to?

That's exactly right.

You haven't posted any code yet have you? You might need to do that if you you're still struggling to meet a Monday 11th deadline. I should be around this weekend mostly.

Possibly study the use of a message like

[1, 44100000 1000000]
|
[vline~]

(that's digit ONE, a comma, and 44100000 and 1000000, no commas)
don't worry that Pd immediately converts these to SI notation.

which is a catch all ramp generator. It says to vline~ start ramping up at a rate of
44100 every 1000 milliseconds.. for a long long time.

This solves most sample playback scenarios where you know only the sample rate but not the length of each file beforehand.

thanks for the help. would I place a command like the vline~ in the upper input of the [tabwrite] command?

I will attatch my file. It's very messy as I have been trying out a lot of things. I just need to figure out how to define the array in terms of the sound that is being looped.

http://www.pdpatchrepo.info/hurleur/FinalProject_Practice2.pd

Yes, [vline~] is used to index the sample table instead of the [phasor~].
I think the command you are searching for is the -resize argument for soundfiler, if you put that in your load messages things should get better. Stop sending things to the chunk size (scaling), unless you also want to modulate the playback rate. If you use the size of the file as the scale then a sweep from 0 tp 1 will play the entire file. Multiply that phasor by a fraction to get slower playback speeds. Look at the example Hardoff told you to, it's in there.

I'm sorry, i'm still not quite getting it...I think that patch i just posted is almost there, but i just really don't understand how to use that vlline~ command...

I was working on another patch since that i hoped my do what I wanted, and it's almost there, but it's still not quite right..

with this patch, i can define the array, and it will play the entire file in a loop, but now I can't figure out how to effectively change the frequency..any advice for the previous patch or this one?

thanks

http://www.pdpatchrepo.info/hurleur/tabread4_loop.pd

ah, nevermind.

thanks for all of the help guys. I was able to look at an example of the sampler.transposition. Incorporating some of the things from that patched helped me work out the new patch and it works pretty well.

i was just reading this thread,trying to get a way to play a synth patch(i'm a newbie).
when i saw hardoffs suggestion,so i dl the casiosynth(nice synth btw) but only manage to copy/paste the complex data of 'pd pianokeys',but couldn't figure out how to just copy the object?(is that called an object?

oh,i've just realised you have to be in edit mode to copy the objects.
thanks.

hi spacedad (nice name

what you need to do is open the casio.pd patch, turn edit mode on (ctrl E), and then click once on an area just above the [pd pianokeys] subpatch*

then, with your mouse still clicked down, move over the subpatch, and it will turn blue. ..unclick

you have now selected the subpatch and can do a ctrl-x or control c to cut or copy it.

ctrl-p will paste it in another patch or anywhere you want.

* quick explaination of objects, externals, abstractions, subpatches:

1. object : anything included in the basic pd distribution (miller vanilla) - examples = [+ ] , [f ] , [tabread] ...etc

2. externals : basically the same as objects, but written by people other than miller... these live in your "extra" folder.. examples = [gemhead] , [makesymbol] , [freeverb~]

3. abstraction : a patch that is saved somewhere on your hard disk to be used inside other patches. you can tell that it is not an object because if you click on it , it will open to show the pd patch inside

4. subpatch : anything that looks like this -> [pd blah-blah-blah] - basically it is a patch within a patch, hence "subpatch"

thanks!
i've just tried joining it onto pd_doc_3's classicsynth eg.but not worky.
that had a kinda stepseq thingy which doesn't seem to be connected(but obviously invisibly is!)i've a lot of learning to do,but discovering the examples in the docs was good today.
i still can't get my midi keyboard to work either,once i get some kind of playabilty understood i should be able to experiment with some of the examples,it's just not obvious.

Maybe CTRL-D is what you want. That duplicates anything that is selected.

Be careful when you copy subpatches that you don't copy items that must be unique,
you will see a warning in the console about things being multiply defined if that happens.

andy

thanks for the tips,
now i get,
'kee (x)...couldn't create.'
i thought i had it working but when i reloaded it,it didn't.hmm.

here's a better, newer version that doesn't need any abstractions:

http://www.pdpatchrepo.info/hurleur/pianokeys.pd

yay!thanks hardoff!

it's confused me,it now has 2 parts 'in' and 'out' how do i connect it to a synth?
cos the 's $0-transpose' and the 'outlets' don't have any connecting pins.

i was just googeling for pd help,when i came across obiwannabe's site.the six simple synths look like a good start to me.thanks for them.
i use synthedit (and i'm only new at that!)and pd is a bit different.

hi, i'm at an internet cafe　cos my computer went to nirvana at a gig last week...but the output of pianokeys is a list,,,,,so you can get the seperate parts by doing an [unpack] on the outlet data

just plug in a [print] object to find what data is coming out.

(internet cafe keyboards are hard to use...)

hi hardoff,sorry to hear about your puter.
i'm not sure i get it still,though i found obiwanabe's synth tutorials,which have been very good for me(only half way through the first one).
so maybe things will become clearer as i reach the end.
pd seems deeper than synthedit,are you familiar?

like this:

[pianokeys]
|
[print]

and then press some keys, and then look in the pd console window to see what is output.

it should be something like:

print: 1 56
print: 0 56
print: 1 47
print: 0 47

the first digit is a note on/off and the 2nd digit is a midinumber.

(i got my old linux machine running again, so i can chat anytime now)

so, to turn a list into two streams, you can use [unpack f f], and then one stream comes out of each outlet of the unpack object.

i have never used synthedit, but from what i understand pd is more 'low level' ..ie closer to a programming language. the learnign curve is a bit steep at times, but if you stick with it you make it through. you don't have to learn really hard maths or anything. (unless you want to)

(oh, and stick with obiwan's stuff if you want to learn things... i just make shit for myself, and sometimes think it might be useful for others if i post it, but my coding is pretty messy and i'm sure there's heaps of basic stuff i don't understand yet)